http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
100℃ 이상에서 작동하는 고분자 전해질형 연료전지용 나피온/Mordenite 복합체 막의 새로운 제조 방법
곽상희,양태현,김창수,윤기현 한국세라믹학회 2003 한국세라믹학회지 Vol.40 No.2
The preparation method for composite membranes of high temperature operation above $100^{\circ}C$ for Polymer Electrolyte Membrane Fuel Cells (PEMFCs ) was presented, using perfluorosulfonylfluoride Nafion resin and mordenite, in addition to the physical properties, proton conductivity and single cells performance for it. The composite membranes were fabricated via melting of Nafion resin with various mordenite content. As the increase of mordenite content, at high temperature range, proton conductivity of the composite membrane increased due to the late dehydration rate of existent water in the mordenite. Also, from the result of the current-voltage relationship for single cells under $130^{\circ}C$ operation condition, the composite membrane cell with l0 wt% mordenite content showed better performance than that of the others over the entire current density range. This result indicated that the existent water in the composite membrane with l0 wt% mordenite content was higher than that with the others, thereby maintains its conductivity. Based upon the results of experiments, therefore, a Nafion/mordenite composite membrane prepared by this work is thought to be a satisfactory polymer electrolyte membrane for PEMFC operation above $100^{\circ}C$. 퍼플루오르설포닐 플로라이드 나피온 레진과 mordenite를 이용하여 $100^{\circ}C$ 이상의 고온에서 작동하는 고분자 전해질형 연료건지용 전해질 막을 제조하고, 물리적 특성, proton전도도 및 단위 전지의 성능을 측정하였다. 나피온/mordenite복합체 막은 나피온 레진을 용융한 후, mordenite를 무게별로 첨가하여 제조하였다. 고온 영역에서 proton 전도도를 측정한 결과, mordenite 함량이 증가할수록 층상 구조를 갖는 mordenite내에 존재하는 층간수의 느린 탈수 속도 때문에 proton 전도도는 증가하였다. 또한, 단위 전지 성능 측정 결과로부터, $130^{\circ}C$의 작동 온도에서 l0wt% mordenite를 함유하고 있는 복합체 막이 전체 영역에 걸쳐 가장 높은 성능을 보임을 알 수 있었다. 이러한 결과는 같은 조건에서. l0wt% mordenite가 함유된 복합체 막 내부에 존재하고 있는 수분이 다른 조성의 막보다 더 많이 존재하게 되어, 복합체 막의 이온 전도도를 유지하기 때문이다. 따라서, 나피온/mordenite복합체 막은 $100^{\circ}C$이상에서 작동하는 고분자 전해질형 연료전지용 전해질 막으로서 적합하다고 생각된다.
100℃ 이상에서 작동하는 고분자 전해질형 연료전지용 나피온/Mordenite 복합체 막의 새로운 제조 방법
곽상희,양태현,김창수,윤기현 한국세라믹학회 2003 한국세라믹학회지 Vol.40 No.2
퍼플루오르설포닐 플로라이드 나피온 레진과 mordenite를 이용하여 100oC 이상의 고온에서 작동하는 고분자 전해질형 연료전지용 전해질 막을 제조하고, 물리적 특성, proton 전도도 및 단위 전지의 성능을 측정하였다. 나피온/mordenite 복합체 막은 나피온 레진을 용융한 후, mordenite를 무게별로 첨가하여 제조하였다. 고온 영역에서 proton 전도도를 측정한 결과, mordenite 함량이 증가할수록 층상 구조를 갖는 mordenite 내에 존재하는 층간수의 느린 탈수 속도 때문에 proton 전도도는 증가하였다. 또한, 단위 전지 성능 측정 결과로부터, 130oC의 작동 온도에서 10wt% mordenite를 함유하고 있는 복합체 막이 전체 영역에 걸쳐 가장 높은 성능을 보임을 알 수 있었다. 이러한 결과는 같은 조건에서, 10wt% mordenite가 함유된 복합체 막 내부에 존재하고 있는 수분이 다른 조성의 막보다 더 많이 존재하게 되어, 복합체 막의 이온 전도도를 유지하기 때문이다. 따라서, 나피온/mordenite 복합체 막은 100oC 이상에서 작동하는 고분자 전해질형 연료전지용 전해질 막으로서 적합하다고 생각된다. The preparation method for composite membranes of high temperature operation above 100oC for polymer electrolyte membrane fuel cells (PEMFCs) was presented, using perfluorosulfonylfluoride Nafion resin and mordenite, in addition to the physical properties, proton conductivity and single cells performance for it. The composite membranes were fabricated via melting of Nafion resin with various mordenite content. As the increase of mordenite content, at high temperature range, proton conductivity of the composite membrane increased due to the late dehydration rate of existent water in the mordenite. Also, from the result of the current-voltage relationship for single cells under 130oC operation condition, the composite membrane cell with 10 wt% mordenite content showed better performance than that of the others over the entire current density range. This result indicated that the existent water in the composite membrane with 10 wt% mordenite content was higher than that with the others, thereby maintains its conductivity. Based upon the results of experiments, therefore, a Nafion/mordenite composite membrane prepared by this work is thought to be a satisfactory polymer electrolyte membrane for PEMFC operation above 100oC.
3T3-L1 지방전구세포 분화에 있어서의 천연물의 억제 효과
곽상희 ․ 김태훈 ․ 김윤희 대구대학교 산업기술연구소 2018 産業技術硏究 Vol.29 No.2
Obesity is the most common metabolic disease and is caused by an excess storage of body fat. As part of our ongoing screening program, we investigated the inhibitory effects of 11 kinds of bioactive compounds in differentiation of 3T3-L1 preadipocytes. Among them, Curculactone B, 1-Feruloyl-beta-D-glucose(FG), Zaluzanin C, 1,2,3,4,6-penta-galloyl-beta-D-glucose(PGG), and Baicalin inhibited accumulation of lipid droplets in differentiated 3T3-L1 adipocytes. Because there was no report that FG or Zaluzanin C has anti-obesity effect, further studies about anti-adipogenic effect of FG or Zaluzanin C are need.
徐日煥,李珍昊,郭相姬,崔成山 충남대학교 기초과학연구소 1995 忠南科學硏究誌 Vol.22 No.2
Triclinic, monoclinic, orthorhombic systems에서 primitive이면서 centrosymmetric space group이면 8가지 對稱中心點中 任意의 한 點을 原點으로 指定하기 爲하여 3個의 structure factor에게 任意의 phase를 割當할 수 있음을 보였다. 이들 phase들은 direct method에서 structure factor의 phase를 決定해가는 basic set이 될 수 있다. In any primitive and centrosymmetric space group in the triclinic, monoclinic, or orthorhombic systems, arbitrary signs can be allocated to three reflections in order to specify the origin at one of the eight centers of symmetry. These signs form a basic set, from which more and more signed reflections emerge in the process of direct method.
김태희,박경봉,곽상희,이건주,조경식 安東大學校 工業技術硏究所 1997 공업기술연구논문집 Vol.4 No.1
The porous ceramic filter media for biological wastewater treatment were made from steel making slag. Biological wastewater treatment properties of these filter media were investigated with artificial wastewater. Biofilms with various microbes were coated on ceramic filter media. Dissolved oxygen increased and N, P and COD were removed effectively. The maximum removal efficiencies of N, P and COD were 95%, 78% and 99%, respectively.