http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
윤재관,박상욱,구기종,한미경,장종현,Yun, J.K.,Park, S.W.,Koo, K.J.,Han, M.K.,Jang, J.H. 한국전자통신연구원 2016 전자통신동향분석 Vol.31 No.5
최근 들어 초다시점 미디어, 홀로그램과 같은 미래 지향적 미디어 기술에 대한 연구가 활발히 진행되고 있다. 초다시점 미디어는 기존의 무안경식 3D 기술의 단점을 극복하기 위하여 양안에 보일 수 있는 시점의 개수를 증가시킨 미디어로 홀로그램 기술 이전의 상용화 기술로 각광받고 있다. 현재까지의 기술은 초다시점 미디어를 획득, 부호화, 이를 디스플레이하기 위한 기술에 치우쳐 있다. 그러나, 미래의 다양한 서비스에 접목하기 위해서는 초다시점 미디어를 효과적으로 전송하는 기술에 대한 연구가 필요하다. 초다시점 미디어는 시점의 수가 많으므로 대용량의 데이터 전송 기술이 필요하고, 전송 중 데이터의 오류가 발생할 경우 그 시점의 뷰 자체가 사용되지 못하기 때문에 그 특성을 반영한 기술 개발이 필요하다. 본고에서는 현재까지의 초다시점 획득, 디스플레이 기술에 대한 동향을 간략하게 살펴보고, 초다시점 미디어의 전송 기술로 많이 연구되고 있는 MPEG의 DASH 및 MMT 기술과 이러한 전송 기술을 이용하는 서비스 혹은 개발 중인 기술에 대하여 살펴보고자 한다.
우선부품목록 선정방안 제시 및 공용화 검색 시스템 구축
윤재복 ( Yoon¸ Jaebok ),김시옥 ( Kim¸ Siok ),문진규 ( Moon¸ Jinkyu ),홍성민 ( Hong¸ Sungmin ),임호정 ( Lim Hojung ),김상한 ( Kim¸ Sanghan ) 한국품질경영학회 2020 품질경영학회지 Vol.48 No.4
Purpose: The purpose of this study is to present a preferred parts list, establish a search tool for common parts, and propose a development plan for parts management. Methods: When selecting the preferred parts list, the weight of the selection of the military parts and the online site of the civilian parts were taken into account. By establishing a database of selected preferred parts list, we have established a system for searching common parts. Results: The results of this study are as follows; In order to establish parts management work in Korea's defense, it is necessary to improve the Defense Acquisition Program Act, Enforcement Decree (Rules), and the Regulations for Defense Acquisition Program Administration. Development of performance indicators for parts management is required, and establishment of procedures and standards for selection of preferred parts lists is required. Considerations for the selection of preferred parts list include whether they are used a lot in civilian products, whether they are used a lot, whether they are certified suppliers, whether they are national and industrial standard products, whether they perform well considering reliability, durability, and quality, and whether they can be supplied continuously. Conclusion: It is necessary to establish policies and systems related to parts management and to establish criteria for selecting preferred parts list for the development of domestic parts management tasks.
음식물 열분해-Char를 활용한 SCR공정에서 촉매로써 반응 특성 연구
윤재랑,여상구,이원준,Nguyen Thi Huong Nhai,동종인 한국폐기물자원순환학회 2017 한국폐기물자원순환학회 학술대회 Vol.2017 No.05
선택적 촉매환원법(Selective Catalytic Reduction, SCR)에서는 V2O5 주로 계열 촉매가 주로 상용되어 있으며 높은 NOX 저감효율의 장점을 지님에도 불구하고 300~400℃의 좁은 활성범위를 가지고 있는 단점이 있다. 이를 보완하기 위해 최근 저온 SCR촉매에 관한 연구가 활발히 진행되고 있으며, 대표적인 카본류 중에서 비교적 가격이 저렴한 산업 및 농업 부산물을 열분해시켜 형성된 바이오매스 Char를 촉매로 활용하는 방안에 관한 연구가 진행되고 있다. 본 연구에서는 연소공정에서 주로 발생되는 대기오염물질 중 대표적인 물질인 질소산화물(NOX)의 SCR공정에서 반응특성을 고찰하기 위해 Lab-scale 규모의 실험 장치를 구현하였다. 실험에 사용된 음식물 열분해-Char는 600℃ 4시간동안 열분해 후 SCR공정에서 촉매로 활용하여 전이금속담지유무, 온도, 수분유무 등의 실험 조건을 변화시켜 NOX를 효율적으로 처리할 수 있는 조건을 도출하였다. 대상시료의 물리․화학적 특성을 파악하기 위해 공업분석, 원소분석을 수행하였으며, 제조한 촉매의 특성은 질소 흡․탈착법, SEM, ICP, EDX 등을 이용하여 분석하였다. 실험에 사용된 Char의 비표면적은 400 m²/g 이상으로 활성화 전 비표면적보다 100배 이상 증가함을 나타냈다. 실험결과에 따라 전이금속인 Cu를 담지하였을 경우, 담지하지 않은 경우보다 높은 저감효율을 나타냈다. NO의 저감효율은 최고 효율을 보이는 350~400℃ 부근의 영역에서 60% 이상의 저감효율을 보였고 그 이후부터 온도가 증가할수록 감소되는 경향을 나타냈다. 수분을 투입하였을 경우 모든 온도 영역에서 NO 저감효율에 악영향을 미치는 것으로 확인되었으며, 최적 효율대비 약 20%의 차이를 나타내었다. 이는 수분과 NH3와의 경장흡착으로 인해 촉매표면에 NO와 반응에 필요한 NH3의 흡착종이 부족하므로 촉매 표면의 활성저하를 일으키기 때문으로 사료된다.
금속 3D 프린팅 공정 최적화를 통한 H13 공구강 조형체의 기계적 특성 향상
윤재철,최중호,이행나,김기봉,양상선,양동열,김용진,이창우,유지훈,Yun, Jaecheol,Choe, Jungho,Lee, Haengna,Kim, Ki-Bong,Yang, Sangsun,Yang, Dong-Yeol,Kim, Yong-Jin,Lee, Chang-Woo,Yu, Ji-Hun 한국분말야금학회 2017 한국분말재료학회지 (KPMI) Vol.24 No.3
In this study, H13 tool steel sculptures are built by a metal 3D printing process at various laser scan speeds. The properties of commercial H13 tool steel powders are confirmed for the metal 3D printing process used: powder bed fusion (PBF), which is a selective laser melting (SLM) process. Commercial H13 powder has an excellent flowability of 16.68 s/50 g with a Hausner ratio of 1.25 and a density of $7.68g/cm^3$. The sculptures are built with dimensions of $10{\times}10{\times}10mm^3$ in size using commercial H13 tool steel powder. The density measured by the Archimedes method is $7.64g/cm^3$, similar to the powder density of $7.68g/cm^3$. The hardness is measured by Rockwell hardness equipment 5 times to obtain a mean value of 54.28 HRC. The optimum process conditions in order to build the sculptures are a laser power of 90 W, a layer thickness of $25{\mu}m$, an overlap of 30%, and a laser scan speed of 200 mm/s.