http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
막대 형태의 비구면 렌즈를 이용한 광통신용 시준기의 설계
강석봉,강은경,황보창권,강상도,김종섭,Kang, Seok-Bong,Kang, Eun-Kyoung,HwangBo, Chang-Kwon,Kang, Sang-Do,Kim, Jong-Sup 한국광학회 2008 한국광학회지 Vol.19 No.1
결합효율이 높고 정렬오차 발생 시 결합효율의 저하가 작은 광통신용 비구면 렌즈 시준기를 설계하였다. 비구면 시준 렌즈는 GRIN 렌즈와 작동거리와 두께가 유사하고 외경이 동일한 원통형 막대 형태로 설계해 GRIN 렌즈를 대체할 수 있도록 하였다. 결합효율의 저하는 시준렌즈의 구면수차에 의해 주요하게 발생하므로, 비구면 렌즈 시준기가 볼 렌즈, GRIN 렌즈 및 C-렌즈 시준기보다 높은 결합효율을 가지도록 비구면 계수를 최적화 해 구면수차를 낮추었다. 설계한 비구면 렌즈 시준기의 결합효율은 기존 시준기들보다 높았으며 정렬오차에 따른 결합효율의 감소도 작았다. A rod-type aspheric lens collimator for the optical telecommunication system which shows high coupling efficiency and experiences small coupling loss for misalignment errors is designed. The working distance, thickness, and diameter of the rod-type aspheric lens are determined to be close to those of the GRIN lens collimator in order to replace the GRIN lens with the rod-type aspheric lens. Since the coupling loss mainly originated from the spherical aberration of the lens, the spherical aberration in the rod-type aspheric lens is reduced drastically, and it turns out that the coupling efficiency of the rod-type aspheric lens collimator is higher than that of the available collimators, such as ball lens, GRIN lens, and C-type lens collimators.
합성반강접 접합부와 합성보의 이력거동을 위한 3-매개변수 모델
강석봉,이경택 대한건축학회지회연합회 2006 대한건축학회지회연합회 학술발표대회논문집 Vol.2 No.1
Although connections of steel structure have been idealized as fully rigid joints or hinge joints for convenience in structural analysis and design process, many connections show the behavior of semi-rigid connections. The semi-rigid connections enable the construction process easy and make it possible to utilize the strength and stiffness of members. The large energy absorption capacity of the connections due to their inelastic behavior makes it possible to design member with good earthquake-resistant capacity. In this research, three-parameter model is evaluated as a simplified analytical model to describe the hysteretic behavior of connections of steel structure by utilizing the experimental results of partially restrained composite connections as well as composite beam. Three-parameter model which can simulate stiffness degradation, strength deterioration and pinching was successful to describe the hysteretic behavior of partially restrained composite connections as well as composite beam.
5층 철근콘크리트 모멘트-저항골조 구조물의 내진성능 평가 및 공사원가 분석
강석봉,김성대,박의수,오상묵,손기영 한국건축시공학회 2015 한국건축시공학회지 Vol.15 No.6
Recently, the concept of seismic design has changed from prescriptive to performance based design. For theperformance based design with the specified target performance of the structure, it is necessary to execute theinelastic structural analysis to predict precisely the actual behavior of the structure. To address this issue, the seismicperformance of the 5-story RC moment-resisting frames designed in accordance with KBC2009 is evaluated throughpush-over analysis and economic analysis is conducted focused on the direct construction costs. The results show thatthe ordinary and the intermediate moment-resisting frame are evaluated to meet the required performance designcriteria and that the direct construction costs of the two frames are similar. However, although the specialmoment-resisting frame designed with strong column-weak girder philosophy satisfies the required performancedesign criteria, the direct construction cost is uneconomical compared with other frames. Therefore, although theintermediate moment-resisting frame of design category D is prohibited in IBC2012, the ordinary and the intermediatemoment-resisting frame are estimated to be more reasonable than the special moment-resisting frame for the designof 5-story RC moment-resisting frame. 구조물 내진설계에 대한 개념이 사양중심설계에서 성능기반설계로 변화하고 있다. 구조물 목표성능을 직접 부여하여설계하는 성능기반설계를 위해서는 구조물 실제 거동을 정확히 예측하기 위한 비탄성 구조해석이 필요하다. 이에 본연구에서는 KBC2009 기준으로 설계한 5층 철근콘크리트모멘트-저항골조 시스템 구조물을 대상으로 푸쉬오버해석을 수행하여 내진성능을 평가한 후 직접공사비를 산출하여경제성을 분석하였다. 분석 결과 보통 및 중간모멘트골조는요구성능설계기준을 만족하며 직접공사비 또한 유사한 것으로 평가되었다. 하지만, 강 기둥-약 보 기준이 적용되는 특수모멘트골조는 요구성능설계기준을 만족하나 다른 골조시스템 보다 비경제적인 것으로 평가되었다. 따라서 IBC2012에서는 내진설계범주 D 중간모멘트골조 적용을 제한하고 있지만 5층 철근콘크리트 모멘트-저항골조 구조물의 경우, 특577수모멘트골조 보다 보통 및 중간모멘트골조로 설계하는 것이 합리적이라고 판단된다.