http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Further study on improvement on strain concentration in through-diaphragm connection
Ying Qin,Jing-Chen Zhang,Peng Shi,Yi-Fu Chen,Yao-Han Xu,Zuo-Zheng Shi 국제구조공학회 2021 Steel and Composite Structures, An International J Vol.39 No.2
Hollow structural section (HSS) columns have been increasingly popular due to their structural and architectural merits. However, practical difficulty lies in developing proper connections. The through-diaphragm connections are considered as suitable connection type that is widely adopted in Asian countries. However, the stress concentration occurs at the location connecting through-diaphragm and steel beam. Furthermore, the actual load path from the beam flange is not uniformly transferred to the HSS column as conventionally assumed. In this paper, tensile tests were further conducted on three additional specimens with beam flange plate to evaluate the load versus displacement response. The load-displacement curves, yield and ultimate capacity, ductility ratio were obtained. Furthermore, the strain development at different loading levels was discussed comprehensively. It is shown that the studied connection configuration significantly reduces the stress concentration. Meanwhile, simplified trilinear load-displacement analytical model for specimen under tensile load was presented. Good agreement was found between the theoretical and experimental results.
Behavior of improved through-diaphragm connection to square tubular column under tensile loading
Ying Qin,Jing-Chen Zhang,Peng Shi,Yi-Fu Chen,Yao-Han Xu,Zuo-Zheng Shi 국제구조공학회 2018 Structural Engineering and Mechanics, An Int'l Jou Vol.68 No.4
Square tubular columns are commonly used in moment resisting frames, while through-diaphragm connection is the most typical configuration detail to connect the H-shaped beam to the column. However, brittle fracture normally occurs at the complete joint penetration weld between the beam flange and the through-diaphragm due to the stress concentration caused by the geometrical discontinuity. Accordingly, three improved types of through-diaphragm are presented in this paper to provide smooth force flow path comparing to that of conventional connections. Tensile tests were conducted on four specimens and the results were analyzed in terms of failure modes, load-displacement response, yield and ultimate capacity, and initial stiffness. Furthermore, strain distributions on the through-diaphragm, the beam flange plate, and the column face were comprehensively evaluated and discussed. It was found that all the proposed three types of improved through-diaphragm connections were able to reduce the stress concentration in the welds between the beam flange and the through-diaphragm. Furthermore, the stress distribution in connection with longer tapered through-diaphragm was more uniform.
Jingcui Yu,Songbin Fu,Peng Liu,Xiaobo Cui,Yu Sui,Guohua Ji,Rongwei Guan,Donglin Sun,Wei Ji,Fangli Liu,An Liu,Yuzhen Zhao,Yang Yu,Yan Jin,Jing Bai,Jingshu Geng,Yingwei Xue,Jiping Qi,Ki-Young Lee 한국분자세포생물학회 2011 Molecules and cells Vol.32 No.1
Previously, we identified 3 overlapping regions showing loss of heterozygosity (LOH, R_1-R_3 from 11 to 30 cM) on chromosome 17 in 45 primary gastric cancers (GCs). The data indicated the presence of tumor suppressor genes (TSGs) on chromosome 17 involved in GC. Among the putative TSGs in these regions, HIC1 (in SR_1) and TOB1 (in SR_3) remain to be examined in GC. By immunohistochemistry (IHC), methylation-specific PCR (MSP) and western blot, we evaluated the expression and regulation status for HIC1 and TOB1 protein in GC. We narrowed down the deletion intervals on chromosome 17 and defined five smaller LOH subregions, SR_1-SR_5 (0.54 to 3.42 cM), in GC. We found that HIC1 had downregulated expression in 86% (91/106) and was methylated in 87% (26/30) of primary GCs. Of the primary GCs showing downregulation of HIC1 protein, 75% (18/24) had methylated HIC1 gene. TOB1 was either absent or expressed at reduced levels in 75% (73/97) of the GC samples. In addition, a general reduction was found in total and the ratio of unphosphorylated to phosphorylated TOB1 protein levels in the differentiated GC cell lines. Further analysis revealed significant simultaneous downregulation of both HIC1 and TOB1 protein in GC tissue microarray samples (67%, 52/78) and in primary GCs (65%, 11/17). These results indicate that silencing of HIC1 and TOB1 expression is a common occurrence in GC and may contribute to the development and progression of the disease.
Xiaogang Zheng,Wendi Fu,Fuyan Kang,Hao Peng,Jing Wen 한국공업화학회 2018 Journal of Industrial and Engineering Chemistry Vol.68 No.-
TiO2-coated cubic α-Fe2O3 with mostly exposed (012) and (101) facets (α-Fe2O3@TiO2) was fabricated using a hydrothermal route for the photo-Fenton degradation of tetracycline under visible light irradiation. TiO2 coating could greatly affect the photocatalytic activity of α-Fe2O3@TiO2. Compared with cubic α-Fe2O3 alone for photodegradation of tetracycline, α-Fe2O3@TiO2 with TiO2 shell of around 15 nm exhibited higher removal efficiency of tetracycline in photo-Fenton system, and its durability was slightly affected after five cycle times under same conditions. It is ascribed to the well-matched interface between cubic α-Fe2O3 core and TiO2 shell, leading to the broadened light-absorption and the efficient separation of photo-generated electon–hole pairs. The OH radicals were main responsible for the advanced photocatalytic performance of α-Fe2O3@TiO2 in visible-light driven degradation of tetracycline.
( Wen Fei Xue ),( Jing Fu Peng ),( Xiao Li Yu ),( Shu Lin Zhang ),( Boping Zhou ),( Dan Qing Jiang ),( Jian Bo Chen ),( Bing Bing Ding ),( Bin Zhu ),( Yao Li ) 한국미생물 · 생명공학회 2016 Journal of microbiology and biotechnology Vol.26 No.1
The widespread occurrence of drug-resistant Mycobacterium tuberculosis places importance on the detection of TB (tuberculosis) drug susceptibility. Conventional drug susceptibility testing (DST) is a lengthy process. We developed a rapid enzymatic color-reaction-based biochip assay. The process included asymmetric multiplex PCR/templex PCR, biochip hybridization, and an enzymatic color reaction, with specific software for data operating. Templex PCR (tem- PCR) was applied to avoid interference between different primers in conventional multiplex- PCR. We applied this assay to 276 clinical specimens (including 27 sputum, 4 alveolar lavage fluid, 2 pleural effusion, and 243 culture isolate specimens; 40 of the 276 were non-tuberculosis mycobacteria specimens and 236 were M. tuberculosis specimens). The testing process took 4.5 h. A sensitivity of 50 copies per PCR was achieved, while the sensitivity was 500 copies per PCR when tem-PCR was used. Allele sequences could be detected in mixed samples at aproportion of 10%. Detection results showed a concordance rate of 97.46% (230/236) in rifampicin resistance detection (sensitivity 95.40%, specificity 98.66%) and 96.19% (227/236) in isoniazid (sensitivity 93.59%, specificity 97.47%) detection with those of DST assay. Concordance rates of testing results for sputum, alveolar lavage fluid, and pleural effusion specimens were 100%. The assay provides a potential choice for TB diagnosis and treatment.
The microRNA-127-3p directly targeting Vamp2 in C2C12 myoblasts
Jie Li,Gaofu Wang,Jing Jiang,Lin Fu,Peng Zhou,Hangxing Ren 한국통합생물학회 2018 Animal cells and systems Vol.22 No.5
MicroRNAs (miRNAs) have been reported that can regulate skeletal muscle growth and development. Previously, we demonstrated that miR-127-3p were differently expressed in skeletal muscle and muscle cells. However, the molecular mechanism of miR-127-3p regulation of skeletal myogenesis are not well elucidated. In this study, we transfected miR-127-3p into C2C12 cells, and found miR-127-3p induces myogenesis by targeting Vamp2. Moreover, the regulatory mechanism of Vamp2 in myoblasts proliferation and differentiation was further confirmed. In conclusion, our data providedevidences that miR-127-3p reciprocally regulated myoblasts proliferation and differentiation through directly targeting Vamp2.
( Yong-sheng Tian ),( Jing Xu ),( Lei-chen ),( Xiao-yan Fu ),( Ri-he Peng ),( Quan-hong Yao ) 한국미생물생명공학회(구 한국산업미생물학회) 2017 Journal of microbiology and biotechnology Vol.27 No.10
Thermostability is an important property of xylanase because high temperature is required for its applications, such as wood pulp bleaching, baking, and animal feedstuff processing. In this study, XynB from Thermobacillus composti, a moderately thermophilic gram-negative bacterium, was modified via site-directed mutagenesis (based on its 3D structure) to obtain thermostable xylanase, and the properties of this enzyme were analyzed. Results revealed that the half-life of xylanase at 65°C increased from 10 to 50 min after a disulfide bridge was introduced between the α-helix and its adjacent β-sheet at S98 and N145. Further mutation at the side of A153E named XynB-CE in the C-terminal of this α-helix enhanced the half-life of xylanase for 60 min at 65°C. Therefore, the mutant may be utilized for industrial applications.
( Bo Wang ),( Ying Yan ),( Jing Xu ),( Xiaoyan Fu ),( Hongjuan Han ),( Jianjie Gao ),( Zhenjun Li ),( Lijuan Wang ),( Yongsheng Tian ),( Rihe Peng ),( Quanhong Yao ) 한국미생물 · 생명공학회 2018 Journal of microbiology and biotechnology Vol.28 No.12
Laccases can oxidize a variety of phenolic and non-phenolic substrates including synthetic dyes. In this research, a laccase gene Lcc9 from Laccaria bicolor was chemically synthesized and optimized to heterogeneous expression in Pichia pastoris and Arabidopsis thaliana. The properties of recombinant laccase expressed by P. pastoris were investigated. The laccase activity was optimal at 3.6 pH and 40°C. It exhibited K<sub>m</sub> and V<sub>max</sub> values of 0.565 mmol l<sup>-1</sup> and 1.51 μmol l<sup>-1</sup> min<sup>-1</sup> for ABTS respectively. As compared with untransformed control plants, the laccase activity in crude extracts of transgenic lines exhibited a 5.4 to 12.4-fold increase. Both laccases expressed in transgenic P. pastoris or A. thaliana could decolorize crystal violet. These results indicated that L. bicolor laccase gene may be transgenically exploited in fungi or plants for dye decolorization.
Behavior of improved through-diaphragm connection to square tubular column under tensile loading
Qin, Ying,Zhang, Jing-Chen,Shi, Peng,Chen, Yi-Fu,Xu, Yao-Han,Shi, Zuo-Zheng 국제구조공학회 2018 Structural Engineering and Mechanics, An Int'l Jou Vol.68 No.4
Square tubular columns are commonly used in moment resisting frames, while through-diaphragm connection is the most typical configuration detail to connect the H-shaped beam to the column. However, brittle fracture normally occurs at the complete joint penetration weld between the beam flange and the through-diaphragm due to the stress concentration caused by the geometrical discontinuity. Accordingly, three improved types of through-diaphragm are presented in this paper to provide smooth force flow path comparing to that of conventional connections. Tensile tests were conducted on four specimens and the results were analyzed in terms of failure modes, load-displacement response, yield and ultimate capacity, and initial stiffness. Furthermore, strain distributions on the through-diaphragm, the beam flange plate, and the column face were comprehensively evaluated and discussed. It was found that all the proposed three types of improved through-diaphragm connections were able to reduce the stress concentration in the welds between the beam flange and the through-diaphragm. Furthermore, the stress distribution in connection with longer tapered through-diaphragm was more uniform.
Superluminescent diode integrated with monitor photodiode
Zhou Shuai,Liu Kun,Li Peng,Pang Fu-Bin,Zhang Jing,Kong Xiang-Ping,Duan Li-Hua,Zhang Chang-Chun 한국물리학회 2023 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.82 No.2
Ridge-waveguide superluminescent diodes with integrated rear-side monitoring photodiode have been fabricated. When electrical isolation trench is not etched to active layer, the leakage current of monitoring photodiode is determined by the resistance between active region electrode and monitoring photodiode electrode, i.e. the resistance multiplied by the leakage current approximately equals to 0.8 V. In order to reduce the leakage current of monitoring photodiode, the electrical isolation trench must be etched into substrate layer. In addition, the electrical isolation trench has to be far enough away from the active region so that the superluminescent diode could achieve small spectral ripple.