Al-Si계 합금의 분말 크기 및 조성에 따른 반사율 변화 특성

최광묵,채홍준,Choi, Gwang Mook,Chae, Hong Jun 한국분말재료학회 (*구 분말야금학회) 2019 한국분말재료학회지 (KPMI) Vol.26 No.1

In this study, the effects of powder size and composition on the reflectance of Al-Si based alloys are presented. First, the reflectance of Al-Si bulk and powder are analyzed to confirm the effect of powder size. Results show that the bulk has a higher reflectance than that of powder because the bulk has lower surface defects. In addition, the larger the particle size, the higher is the reflectance because the interparticle space decreases. Second, the effect of composition on the reflectance by the changing composition of Al-Si-Mg is confirmed. Consequently, the reflectance of the alloy decreases with the addition of Si and Mg because dendrite Si and $Mg_2Si$ are formed, and these have lower reflectance than pure Al. Finally, the reflectance of the alloy is due to the scattering of free electrons, which is closely related to electrical conductivity. Measurements of the electrical conductivity based on the composition of the Al-Si-Mg alloy confirm the same tendency as the reflectance.

Calcite 필러를 함유한 유리 복합체의 표면형상과 반사율

전재승,황성진,안지환,김형순,Jeon, Jae-Seung,Hwang, Seong-Jin,Ahn, Ji-Hwan,Kim, Hyung-Sun 한국재료학회 2009 한국재료학회지 Vol.19 No.8

Reflection properties, such as specular reflection and diffuse reflection, are very important optical properties for the reflector, which has high reflectance in the display and architecture industry. Calcite is lowcost, nontoxic, and stable over a wide temperature range. Therefore, it is one of the most widely using fillers in many industries and has some advantages over titania as a filler to improve reflectance. However, optical properties, especially those of ceramic-filled composites, have not been analyzed. We studied the reflectance of calcite composites with their surface roughness. The reflectance of the composites was determined using a UV-visible spectrometer. The surface morphology and the micro-structure of the composites were investigated by atomic force microscope. The reflectance of the composites was improved by increasing the content of calcite in the calcite-frit composite. The reflectance is related with the surface roughness in the composites. However, the reflectance depends on the calcite contents in materials with similar surface roughness.

위성관측 오존계에서 최소 반사도법을 이용하여 동아시아 지역의 지면반사도 산출

신희우,유정문,이권호 한국지구과학회 2019 韓國地球科學會誌 Vol.40 No.3

This study derived spectral Lambertian Equivalent Reflectance (LER) over East Asia from the observations of Ozone Monitoring Instrument (OMI) onboard polar-orbit satellite Aura. The climatological (October 2004-September 2007) LER values were compared with the surface reflectance products of OMI or MODerate resolution Imaging Spectroradiometer (MODIS) in terms of the atmosphere-environment variables as follows: wavelength (UV, visible), surface properties (land, ocean), and cloud filtering. Four kinds of LER outputs in the UV and visible region (328-500 nm) were retrieved based on the averages of lowest (1, 5, and 10%) surface reflectance values as well as the minimum reflectance. The average of the lowest 10% among them was in best agreement with the OMI product: correlation coefficient (0.88), RMSE (1.0%) and mean bias (−0.3%). The 10% average and OMI LER values over ocean were 2% larger in UV than in visible, while the values over land were 1% smaller. The LER variability on the wavelength and surface property was highest (~3%) in the condition of both land and visible, particularly in the ice-cap and desert regions. The minimum reflectance values over the oceanic and inland sample areas overestimated the MODIS product by 1.4%. This high-resolution MODIS observations were effective in removing cloud contamination. The relative errors of the 10% average to MODIS were smaller (−0.6%) over ocean but larger (1.5%) over land than those of the OMI product to MODIS. The reduced relative error in the OMI product over land may result from additional cloud filtering using the Landsat data. This study will be useful when retrieveing the surface reflectance from geostationary-orbit environmental satellite (e.g., Geostationary Environment Monitoring Spectrometer; GEMS). 극궤도 위성(Aura)에 탑재되어 운용 중인 Ozone Monitoring Instrument (OMI)를 이용하여 동아시아 지역에 대한 등가 람버시안 반사도(Lambertian Equivalent Reflectance; LER)를 유도하였다. 본 연구의 LER 기후값(2004년 10월-2007년 9월)은 기존 OMI 및 MODIS 결과와 다음 대기환경 변수의 관점에서 비교분석되었다. 파장(자외선, 가시광선), 지표 특성(육지, 해양), 그리고 구름 제거. 자외선 및 가시광선 파장역(328-500 nm)에서 산출된 LER은 최소 반사도 뿐만 아니라 세 종류 하위 평균(1, 5, 10% 이내)으로 산출되었다. 이들 중에 10% 평균값이 OMI 결과와 가장 잘 일치하였다. 여기서 상관계수는 0.88, 평균 제곱근 오차는 1.0%. 그리고 평균 편차는 −0.3%이었다. 10% 평균값과 기존 OMI LER값은 해양에서 가시광선에 비하여 자외선 영역에서 큰(~2%) 반면에 육지에서는 작게(~1%) 나타났다. 또한 파장 및 지표 특성에 따른 LER 변동폭은 육지 및 가시광선 조건에서, 특히 만년설 및 사막 지역에서 크게 나타났다(~3%). 최소 반사도값은 해양 및 육지의 표본 지역에서 MODIS에 비하여 약 1.4% 과대 산출되었다. 이러한 원인은 고해상도 MODIS 자료에서의 효과적인 구름 제거에 있다고 분석되었다. MODIS에 대한 10% 평균값의 상대 오차는 기존 OMI 산출물에 비하여 해양에서 작았으나(−0.6%) 육지에서는 컸다(1.5%). OMI 산출물 경우에 육지에서의 작은 상대 오차는 Landsat 자료 이용한 효과적인 구름 제거에 있다고 추정되었다. 본 연구는 정지궤도 환경위성(예, GEMS) 관측을 이용한 지면반사도 산출에 기여할 것으로 기대된다.

천리안위성 기상 탑재체의 가시 채널 관측을 이용한 지표면 반사도 산출 - 배경광학두께 보정의 효과 분석 -

김미진 ( Mi Jin Kim ),김준 ( Jhoon Kim ),윤종민 ( Jong Min Yoon ) 대한원격탐사학회 2014 大韓遠隔探査學會誌 Vol.30 No.5

인공위성의 가시 영역 관측으로부터 에어로솔의 정량적인 정보를 산출하는데 있어, 지표면 반사도의 보정은 매우 중요한 역할을 한다. 이에 본 연구에서는 두 가지 방법을 이용하여 천리안위성의 기상탑재체로부터 관측된 가시채널의 반사도로부터 지표면 반사도를 산출하고, 상호 비교 하여 정확도를 검증하고자 하였다. 첫 번째 방법은 최소 반사도법으로, 동일한 화소에서 일정 기간 동안 관측된 반사도 중 최소값이 에어로솔에 의한 영향 없이 지표반사에 의한 영향만을 포함한다는 가정을 기반으로, 대기산란 효과를 보정하여 지표면 반사도를 산출하는 방법이다. 두 번째 방법은 미리 알고 있는 에어로솔 정보를 고려하여 대기-에어로솔 효과를 보정함으로써 지표면 반사도를 얻는 것으로 본 연구에서 대기 보정법 이라 칭한다. 두 번째 방법을 적용하기 위해서는 정확한 에어로솔 정보가 요구되므로, 에어로솔 광학두께의 오차범위가 0.01 (≥ 440 nm) 이내인 것으로 알려진 AERONET의 산출물을 이용하였다. 본 연구의 주요 목적은 최소 반사도법을 통하여 산출되는 지표면 반사도가 어느 정도의 정확도를 가지는지를 파악하는데 있어, 대기 보정법을 통하여 산출되는 값을 기준 값으로 두고 비교 분석을 수행하였다. 또한, 대기 중 존재하는 배경광학두께가 최소 반사도법의 정확도에 미치는 영향을 분석해보고자 하였다. 서울 지역에서 2012년 봄철 기간(3월 ~ 5월) 동안 AERONET 관측지점에서 산출된 결과를 분석 한 결과, 대기 보정법을 통해 산출된 지표면 반사도의 평균이 0.108로 나타났고, 배경광학두께에 대한 고려 없이 최소 반사도법을 통하여 산출된 지표면 반사도는 그에 비해 약 0.012 높은 값을 보였다. 한 편 배경광학두께를 고려하였을 경우 그 차이는 0.010으로 감소하여, 정확도 향상에 기여하였음을 확인하였다. Accurate correction of surface effect from back scattered solar radiance is one of key issue to retrieve aerosol information from satellite measurements. In this study, two different methods are applied to retrieve surface reflectance by using single visible channel measurement from meteorological imager onboard COMS. The first one is minimum reflectance method, which composes the minimum value among previously measured reflectances at each pixel over a certain search window length. This method assumes that the darkest pixel corresponds to the aerosol-free condition, and deduces surface reflectance by correcting atmospheric scattering from the measured visible reflectance. The second method, named as the “atmospheric correction method” in this study, estimates the result by correcting aerosol and atmospheric scattering with ground-based observation of aerosol optical properties. The purpose of this study is to investigate the retrieval accuracy of the widelyused minimum reflectance method. Also, the retrieval error caused by the loading of background aerosol is mainly estimated. The comparison between surface reflectances retrieved from the two methods shows good agreement with the correlation coefficient of 0.87. However, the results from the minimum reflectance method are slightly overestimated than the values from the atmospheric correction method when surface reflectance is lower than 0.2. The average difference between the two results is 0.012 without the background aerosol correction. By considering the background aerosol effect, however, the difference is reduced to 0.010.

위성센서 대리 검보정을 위한 소노란 사막의 복사 가변성 연구

김원국 ( Won Kook Kim ),이상훈 ( Sang Hoon Lee ) 大韓遠隔探査學會 2013 大韓遠隔探査學會誌 Vol.29 No.2

The Sonoran Desert, which is located in North America, has been frequently used for vicarious calibration of many optical sensors in satellites. Although the desert area has good conditions for vicarious calibration (e.g. high reflectance, little vegetation, large area, low precipitation), its adjacency to the sea and large variability in atmospheric water vapor are the disadvantages for vicarious calibration. For vicarious calibration using top-of-atmospheric (TOA) reflectance, the atmospheric variability brings about degraded precision in vicarious calibration results. In this paper, the location with the smallest radiometric variability in TOA reflectance is sought by using 12-year Landsat 5 data, and corrected the TOA reflectance for bidirectional reflectance distribution function (BRDF) which is another major source of variability in TOA reflectance. Experiments show that the mid-western part of the Sonoran Desert has the smallest variability collectively for visible and near-infrared bands, and the variability from the suntarget- sensor geometry can be reduced by the BRDF correction for the visible bands, but not sufficiently for the infrared bands. 북미 지역에 위치한 소노란 사막은 많은 위성 광학 센서의 대리 검보정에 이용되어왔다. 소노란사막은 대리 검보정에 적합한 조건들, 즉 높은 반사율, 적은 식생, 비교적 넓은 면적, 적은 강우량 등을 가지고 있지만, 고도가 낮고 바다에 근접해 있어 대기의 수증기량에 계절적 변화가 크다는 단점이 있다. 대기 상층의 반사율(Top-Of-Atmosphere reflectance, TOA reflectance)만을 이용하여 센서의 감퇴(sensor degradation)를 추정하는 대리 검보정 방법의 경우, 이러한 대기 가변성은 대리 검보정의 정밀도를 떨어뜨리는 결과를 가져온다. 이 논문에서는 12년간에 걸쳐 수집된 Landsat 5 영상을 이용해 소노란 사막 지역 내에서 복사도의 가변성이 가장 작은 위치를 찾아내고, TOA 반사율 가변성의 또 다른 원인인 양방향 반사분포함수(Bidirectional reflectance distribution function, BRDF)를 규명하여 그에 대한 보정을 시도하였다. 실험의 결과, 소노란 사막의 중서부가 가시광선과 근적외선 밴드에 대해 고루 낮은 가변성을 가지는 지역임이 밝혀졌고, BRDF 모델을 통하여 태양-타겟-센서 간의 위치변화로 말미암은 가변성을 고려한 결과, 가시광선 밴드들의 경우 그 BRDF 효과가 상당히 감소하였지만, 근적외선 밴드들의 경우 대기 가변성으로 인해 BRDF 효과가 많이 제거되지 못하였음을 관찰하였다.

Effects of Nanostructures Formed by Plasma Etching on the Reflectance of Solar Cells

Seung-Heon Ryu,Cheng Yang,Dong-Ho Kim,Teak Kim,유원종 한국물리학회 2009 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.54 No.3

We investigated lithography-free plasma etching methods to modify the surface of single- crystalline Si, which is widely used for manufacturing of solar cells. Experiments were performed using / dry etching for the purpose of reducing the reflectivity at the Si surface. Upon inductively-coupled-plasma (ICP) etching in /, pillar-shaped nanostructures were formed on the surface, which changed to black. Furthermore, various etching methods and conditions to suppress the reflectivity in a broad spectral range were investigated for optimization of the surface property of the solar cells, i. e., enhancement of the solar cell efficiency. The mechanisms for the reflectivity on different surface have been studied using scanning electron microscope (SEM), atomic force microscope (AFM) and ultraviolet (UV) analyses. According to the analyses, self-assembled nanostructures efficiently reduce the reflectance. Before etching, the reflectance of a Si wafer was % in the wavelength range of 600 - 1000 nm and >50 % in the wavelength range of 200 - 400 nm, but it decreased to % in the wavelength range of 200 - 1000 nm after performing / plasma etching. The formation of nanostructure arrays and the related reflectance were also studied as functions of the time, the bias RF-power and the gas mixture, as the condition of the / plasma markedly affects the reflectance of the nanostructure. We were able to identify the best conditions to obtain high-aspect-ratio vertically-aligned Si nanostructures with a low reflectance.

RS 기법을 이용한 토양수분과 토양 색에 관련된 토양의 분광반사

박종화 ( Park Jong Hwa ) 한국농공학회 2003 韓國農工學會誌 : 전원과 자원 Vol.45 No.5

Recent advances in remote sensing techniques provide the potential for monitoring soil color as well as soil moisture conditions at the spatial and temporal scales required for detailed local modeling efforts. Soil moisture as well as soil color is a key feature used in the identification and classification of soils. Soil spectral reflectance has a direct relationship with soil color, as well as to other parameters such as soil moisture, soil texture, and organic matter. We evaluate the influence of seven soil properties, soil color and soil moisture, on soil spectral reflectance. This paper presents the results obtained from the ground-truth spectral reflectance measurements in the 300-1100 nm wavelength range for various land surfaces. The results suggest that the reflectance properties of soils are related to soil color, soil texture, and soil moisture. Increasing soil moisture content generally decreases soil reflectance which leads to parallel curves of soil reflectance spectra across the entire shortwave spectrum. We discuss the relationships between the soil reflectance and the Munsell Soil Color Charts which contain standard color chips with colors specified by designations for hue, value, and chroma.

상관 계수를 이용한 유사 모집단 기반의 분광 반사율 추정

유지훈,하호건,김대철,하영호 대한전자공학회 2013 전자공학회논문지 Vol.50 No.11

In general, a color of an image is represented by using red, green, and blue channels in a RGB camera system. However, only information of three channels are limited to estimate a spectral reflectance of a real scene. Because of this, the RGB camera system can not accurately represent the color. To overcome this limitation and represent an accurate color, researches to estimate the spectral reflectance by using a multi-channel camera system are being actively proceeded. Recently, a reflectance estimation method adaptively constructing a similar training set from a traditional training set according to a camera response by using a spectral similarity was introduced. However, in this method, an accuracy of the similar training set is reduced because the spectral similarity based on an average and a maximum distances was applied. In this paper, a reflectance estimation method applied a spectral similarity based on a correlation coefficient is proposed to improve the accuracy of the similar training set. Firstly, the correlation coefficient between the similar training set and the spectral reflectance obtained by Wiener estimation method is calculated. Secondly, the similar training set is constructed from the traditional training set according to the correlation coefficient. Finally, Wiener estimation method applied the similar training set is performed to estimate the spectral reflectance. To evaluate a performance of the proposed method with previous methods, experimental results are compared. As a result, the proposed method showed the best performance. 일반적으로 영상의 색은 RGB 카메라 시스템의 red, green, blue 채널들을 사용하여 재현된다. 하지만 세 채널들의 정보만으로 실제 장면의 분광 반사율을 추정하는데 한계가 있다. 이 때문에 RGB 카메라 시스템은 색을 정확하게 재현하지 못한다. 이 한계를 극복하고 정확한 색을 재현하기 위해 다채널 카메라 시스템을 사용하여 분광 반사율을 추정하는 연구들이 활발히 진행되고 있다. 최근 분광 유사도를 사용하여 카메라 응답에 따라 기존 모집단에서 유사 모집단을 적응적으로 구성하는 분광 반사율 추정법이 소개되었다. 하지만 이 방법에는 평균 거리와 최대 거리 기반의 분광 유사도가 적용되었기 때문에 유사 모집단의 정확도가 저하된다. 본 논문에서는 유사 모집단의 정확도를 향상시키기 위해 상관 계수 기반의 분광 유사도가 적용된 분광 반사율 추정법을 제안하였다. 먼저 기존 모집단과 위너(Wiener) 추정법을 통해 획득된 분광 반사율 간의 상관 계수를 계산한다. 다음으로 상관 계수에 따라 기존 모집단에서 유사 모집단을 구성한다. 마지막으로 유사 모집단이 적용된 위너 추정법을 수행하여 분광 반사율을 추정한다. 제안된 방법과 이전의 방법들의 성능을 평가하기 위해 실험 결과를 비교하였다. 그 결과, 제안한 방법이 제일 우수한 성능을 나타내었다.

Acid Texturing에 의한 태양전지용 다결정 실리콘 기판의 표면 반사율 감소

김지선,김범호,이수홍,Kim, Ji-Sun,Kim, Bum-Ho,Lee, Soo-Hong 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.2

To improve efficiency of solar cells, it is important to make a light trapping structure to reduce surface reflectance for increasing absorption of sun light within the solar cells. One of the promising methods that can reduce surface reflectance is isotropic texturing with acid solution based on hydrofluoric acid(HF), nitric acid($HNO_3$), and organic additives. Anisotropic texturing with alkali solution is not suitable for multicrystalline silicon wafers because of its different grain orientation. Isotropic texturing with acid solution can uniformly etch multicrystalline silicon wafers unrelated with grain orientation, so we can get low surface reflectance. In this paper, the acid texturing solution is made up of only HF and $HNO_3$ for easy controlling the concentration and low cost compared to acid solution with organic additives. $HNO_3$ concentration and dipping time were varied to find the condition of minimum surface reflectance. Textured surfaces were observed Scanning Electron Microscope(SEM) and surface reflectance were measured. The best result of arithmetic mean(wavelength from 400 nm to 1000 nm) reflectance with acid texturing is 4.64 % less than alkali texturing.

차열 및 방수성능을 갖는 쿨루프 도막재의 색상별 일사반사율 평가 연구

오상근 ( Oh Sang-keun ),이태양 ( Lee Tae Yang ),박진상 ( Park Jin-sang ),김동범 ( Kim Dong-bum ),박완구 ( Park Wan-goo ),최수영 ( Choi Su-young ) 한국건축시공학회 2018 한국건축시공학회 학술발표대회 논문집 Vol.18 No.1

Cool roof coating materials generally use white color which has the highest reflectance, but it is a tendency to apply various colors because it can cause glare and fatigue of a nearby building user due to the urban beauty and high reflection. This study when applying color diversity material cool roof coating was carried out as a basic research for the degree of solar radiation reflectance change. Experiment result. As a result of the measurement of the reflectance of each specimen, white showed the best reflectance in the near infrared region, and black had the lowest reflectance. Also, in case of brown, it was confirmed that the reflectance of solar radiation in the near extrinsic region is lower than that of gray.