http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
SHS 공정에 의해 제조된 Mo<sub>x</sub>W<sub>1-x</sub>Si<sub>2</sub> 발열체의 열화메커니즘
이동원,이상헌,김용남,이성철,구상모,오종민,Lee, Dong-Won,Lee, Sang-Hun,Kim, Yong-Nam,Lee, Sung-Chul,Koo, Sang-Mo,Oh, Jong-Min 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.10
The degradation mechanism of $Mo_xW_{1-x}Si_2$ ultrahigh-temperature heating elements fabricated by self-propagating high-temperature synthesiswas investigated. The $Mo_xW_{1-x}Si_2$ specimens (with and without post-annealing) were subjected to ADTs (accelerated degradation tests) at temperatures up to $1,700^{\circ}C$ at heating rates of 3, 4, 5, 7, and $14^{\circ}C/min$. The surface loads of all the specimen heaters were increased with the increase in the target temperature. For the $Mo_xW_{1-x}Si_2$ specimens without annealing, many pores and secondary-phase particles were observed in the microstructure; the surface load increased to $23.9W/cm^2$ at $1,700^{\circ}C$, while the bending strength drastically reduced to 242 MPa. In contrast, the $Mo_xW_{1-x}Si_2$ specimens after post-annealing retained $single-Mo_xW_{1-x}Si_2$ phases and showed superior durability after the ADT. Consequently, it is thought that the formation of microcracks and coarse secondary phases during the ADT are the main causes for the degraded performance of the $Mo_xW_{1-x}Si_2$ heating elements without post-annealing.
SHS 공정으로 제조된 Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si₂ 발열체의 가속수명시험과 고장분석
이동원(Dong-Won Lee),이상헌(Sang-Hun Lee),김용남(Yong-Nam Kim),이희수(Heesoo Lee),이성철(Sung-Chul Lee),구상모(Sang-Mo Koo),오종민(Jong-Min Oh) 한국전기전자학회 2017 전기전자학회논문지 Vol.21 No.3
고온자전합성과 후열처리 공정으로 MoxW1-xSi₂ 발열체를 제조하였다. MoxW1-xSi₂ 발열체의 신뢰성을 검증하기 위해 가속수명시험을 수행하였으며, 수명시간을 Minitab 프로그램으로 추정하였다. 또한, 가속수명시험 후의 MoxW1-xSi₂ 발열체의 고장분석을 전기적과 구조적 특성으로부터 수행하였다. 그 결과, MoxW1-xSi₂ 발열체의 지배적인 고장 유형은 발열체 내부의 크랙 형성과 SiO₂ 보호층의 박리임을 확인하였다. MoxW1-xSi₂ heaters were fabricated by self-propagating high-temperature synthesis (SHS) process and post sintering process. To validate the reliability of the MoxW1-xSi₂ heaters, the accelerated life test (ALT) was conducted, and then lifetime to MoxW1-xSi₂ heaters was estimated by using Minitab programs. Also, the failure analysis of MoxW1-xSi₂ heaters after ALT was performed through electrical and structural properties. As the results, it was confirmed that the dominant failure mode of MoxW1-xSi₂ heaters is the crack formation in heaters and the delamination of protective SiO₂ layers.
박만호(Park Man-Ho),문제우(Mun Je-U),김성일(Kim Sung-Il),홍성모(Hong Seong-Mo),김종태(Kim Jong-Tae) 한국철도학회 2008 한국철도학회 학술발표대회논문집 Vol.- No.-
Mo-Am arch bridge is only the long-span bridge (with 125m span) in the Kyong-Bu high-speed line in service, while other bridges are PSC box girder bridges and steel composite bridges with span lengths of 25~50m. However, in foreign high-speed lines, special cable-supported bridges like cable-stayed bridges and extradosed bridges are being adopted in earnest with technical specifications. The cable supported bridge is recognized as one of the indices of technology in civil engineering field, and thus it is being adpoted with a sense of rivalry in countries with advanced technology in railway engineering. In this paper, to apply the top-level cable-supported bridge technology to the domestic high-speed line up to 400㎞/h by establishing the technical specifications on cable-supported bridges including span length, the requirements for securing the dynamic stability and running safety of high speed train are analyzed through case studies for domestic and foreign cases.
Cho, Myung-Yeon,Lee, Sung-Chul,Park, Chulhwan,Lee, Daeseok,Koo, Sang-Mo,Moon, Kyoung-Sook,Lee, Dong-Won,Oh, Jong-Min Elsevier 2019 INTERMETALLICS Vol.110 No.-
<P><B>Abstract</B></P> <P>High-performance tungsten molybdenum disilicide (Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB>) heating elements were prepared using a self-propagating high temperature synthesis process. The effect of post annealing on the degradation behavior of the alloy was experimentally investigated. Increasing the attrition milling time up to 20 min during powder preparation resulted in Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters with the highest density, which increased the fracture strength compared to samples with shorter attrition times. Such samples were annealed and evaluated as heating elements using accelerated degradation tests and failure analysis in order to compare their structural characteristics and flexural strength with as-fabricated samples. The annealed Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heater showed a relatively dense structure with few pores and no secondary phases, apart from a SiO<SUB>2</SUB> layer. This favorable structure prevented bubble formation, which can result in fracturing of the heater, as revealed by evaluation at high temperatures with various heating rates. The flexural strength of the annealed specimen was 2.5-times higher than that of the as-fabricated specimen, which was attributed to removal of secondary phases during annealing. Failure time and surface load analyses were used to investigate the fracture mechanism of the Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters in detail at 1790 °C by quantifying bubble formation and the presence of secondary phases.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Self-propagating high temperature synthesis of Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters demonstrated. </LI> <LI> Post-annealed Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters were highly dense, with good flexural strength. </LI> <LI> Bubble formation (the main cause of fracture) suppressed at ultra-high temperature (above 1700 °C). </LI> <LI> Surface load, failure time, and bubble formation used to study fracture mechanisms. </LI> </UL> </P>
오상우,모성종,Sang-Oh Oh,Seong-Jong Mo 대한화학회 1993 대한화학회지 Vol.37 No.7
$[{Mo(NO)_2Cl_2}_n]$ 및 $[{W(NO)_2Cl_2}_n]$의 다핵착물과 킬레이트 리간드인 1,10-phenanthroline을 반응시켜 중성화합물인 $[Mo(NO)_2Cl_2(phen)]$ 과 $[W(NO)_2Cl_2(phen)]$을 각각 합성하였다. 아세톤 용매에서 이 cis-디니트로실 화합물과 과염소산 은(I)을 1:1로 반응시켜 $[Mo(NO)_2(phen)(S)Cl][ClO_4]$ 및 $[W(NO)_2(phen)(S)Cl] [ClO_4]$ (S = acetone)의 양이온 화합물을 얻었다. 이 1가 양이온 화합물과 피라진을 2:1의 양론으로 각각 반응시켜 $[Cl(phen)(NO)_2M(pyz)M'(NO)_2(phen)Cl][C1O_4]_2$(M = Mo, M' = W) 및 $[Cl(phen)(NO)_2M(pyz)M'(NO)2(phen)Cl][C1O4]2$(M = Mo, M' = W)형의 호모 및 헤테로 이핵착물을 합성하였다. 합성한 착물의 특성은 원소분석과, $^1H-,\;^{13}C-$핵자기 공명 및 자외선, 전자흡수스펙트럼을 이용해서 조사하였으며 이들 분광학적 결과로부터 디니트로실 이핵착물의 기하학적 구조가 피라진 다리 리간드를 중심으로 한 $C_{2v}$ 대칭구조임을 확인할 수 있었다. The neutral monomeric compounds $[Mo(NO)_2Cl_2(phen)]$ and $[W(NO)_2Cl_2(phen)]$ (phen= 1,10-phenanthroline) have been prepared by reactions of polymeric compounds $[{Mo(NO)_2Cl_2}n],\;[{W(NO)_2Cl_2}n]$ with chelate ligands. Additions of one equivalent of silver(I) perchlorate to these cis-dinitrosyl compounds in acetone solution produce $[Mo(NO)_2(phen)(S)Cl][ClO_4]\;and\;[W(NO)_2(phen)(S)Cl][ClO_4]$ (S = acetone). The homo- and hetero-dinuclear complexes, $[Cl(phen)(NO)_2M(pyz)M'(NO)_2(phen)Cl][ClO_4]_2$ (M = Mo, W) and $[Cl(phen)(NO)_2M(pyz)M'(NO)_2(phen)Cl][C1O_4]_2$ (M = Mo, M' = W) have been prepared by these monocationic complexes with pyrazine ligand respectively. These complexes characterized by elemental analysis, $1^H-\;and\;^{13}C-NMR$, infrared, and UV-visible spectroscopy are reported. The spectral data indicate that homo- and hetero-dinuclear complexes were symmetrical structures of $C_{2v}$.
( Sang Mo Kang ),( Abdul Latif Khan ),( Young Hyun You ),( Jong Guk Kim ),( Muhammad Kamran ),( In Jung Lee ) 한국미생물 · 생명공학회 2014 Journal of microbiology and biotechnology Vol.24 No.1
Very few plant growth-promoting rhizobacteria (PGPR) are known to produce gibberellins (GAs). The current study aimed to isolate a phytohormone-producing PGP rhizobacterium from soil and assess its potential to enhance plant growth. The newly isolated bacterium was identified as Leifsonia soli sp. SE134 on the basis of partial 16S ribosomal RNA gene sequence. Application of L. soli culture filtrate significantly increased the biomass, hypocotyl, and root lengths of cucumber seeds as compared with non-inoculated sole medium and distilled water treated controls. Furthermore, the PGPR culture was applied to the GA-deficient mutant rice cultivar Waito-C. Treatment with L. soli SE134 significantly increased the growth of Waito-C rice seedlings as compared with controls. Upon chromatographic analysis of L. soli culture, we isolated, detected and quantified different GAs; namely, GA1 (0.61 ± 0.15), GA4 (1.58 ± 0.26), GA7 (0.54 ± 0.18), GA8 (0.98 ± 0.15), GA9 (0.45 ± 0.17), GA12 (0.64 ± 0.21), GA19 (0.18 ± 0.09), GA20 (0.78 ± 0.15), GA24 (0.38 ± 0.09), GA34 (0.35 ± 0.10), and GA53 (0.17 ± 0.05). Plant growth promotion in cucumber, tomato, and young radish plants further evidenced the potential of this strain as a PGP bacterium. The results suggest that GA secretion by L. soli SE134 might prove advantageous for its ameliorative role in crop growth. These findings can be extended for improving the productivity of different crops under diverse environmental conditions.
Jong Min Park,Sang Il Choi,Jong Soon Kim,Hyun Mo Jung 한국포장학회 2019 한국포장학회지 Vol.25 No.3
Carton clamps, one of forklift attachments, allow users to quickly handle shipping units such as unitized loads, large shipping cases, or crates without the requirement of pallets. As the use of palletless handling by clamp trucks increases, so does the need for simulation research on clamp truck handling. The frictional characteristics for various contact conditions of corrugated paperboards and their constituent boards were analyzed to obtain the data needed in the computer simulation for the handling of carton clamp truck. The overall mean of static-frictional coefficients between selected corrugated paperboards was 0.38 (±0.01), which was 1.3~1.6 times greater than 0.23~0.29 of the frictional coefficients between boards. The overall mean of static-frictional coefficients between the corrugated paperboards and the rubber contact pad was 0.82 (±0.02), which was about 1.1 to 2.8 times greater than 0.29~0.78 of the static-frictional coefficient between the linerboard and the rubber contact pad. The overall mean of kinetic-frictional coefficients between the corrugated paperboards was 0.35 (±0.01), and 0.76 (±0.02) between the corrugated paperboards and the rubber contact pad.
Safety and Feasibility of Laparoscopic Surgery for Small Bowel Obstruction
Sung Min Kim,Jun Ho Park,Byung Chun Kim,Byung Mo Kang,Jong Wan Kim,Jeong Yeon Kim 대한내시경복강경외과학회 2018 Journal of Minimally Invasive Surgery Vol.21 No.2
Purpose: Laparoscopic adhesiolysis is increasingly used to treat patients with small bowel obstruction (SBO), however, its safety of laparoscopic surgery(LS) with bowel resection in SBO is unclear. The purpose of the present study was to compare the perioperative outcomes of LS with those of open surgery (OS) for SBO and to evaluate the risk factors of 30-day postoperative morbidity and recurrence. Methods: We retrospectively reviewed medical records of patients who had been diagnosed with SBO and underwent surgery at four Hallym-University-affiliated hospitals between January 2013 and December 2016. The rates of 30-day postoperative complications and recurrence were compared between groups using univariate and multivariate analysis. Propensity score matching was performed to compare the outcome. Results: A total of 117 patients with SBO were included in the present study, of which 86 underwent OS and 31 underwent LS. Time to water intake, time to soft diet, and postoperative hospital stay were significantly shorter in the LS group (p=0.002, 0.003, and 0.027, respectively). The complication (p=0.249) and recurrence rate (p=0.679) were similar between the two group. Propensity score matching analysis demonstrated that laparoscopic surgery showed quicker recovery and similar complication and recurrence rate. In multivariate analysis, LS was not associated with either complications (p=0.806) or recurrence (p=0.956). Conclusion: LS is associated with several perioperative advantages for the treatment of SBO without affecting the risk of 30-day postoperative complications or recurrence. Therefore LS can be a safe and feasible option for treating SBO.