http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
성백섭,차용훈,박창언,김일수,김덕중,이연신,손준식 한국공작기계학회 2001 한국공작기계학회 춘계학술대회논문집 Vol.2001 No.-
Currently knowledge of strain in welds has mainly been obtained from strain gaging method; that is directly attaching most of the material to the gage. The very few non-contact method are still in the early stage. One of the non-contact methods is by the use of the laser that has high-level of the accuracy for the measurement, and this laser also has excellent characteristics on which many studies for its applications are focused throughout the many fields. The dissertation is on the measurement of the strain caused by the characteristics and the temperature changes of the TIG welded zone which is used with 3D ESPI system that is functionally modified through the laser ESPI system. This system employed the aluminum sheet-metal which are mainly used for the steel plate such as for the electronics, chemistry, food instrument and electronic appliances.
성찬용,윤준노,김영익,임상혁,정덕현 충남대학교 농업과학연구소 2003 농업과학연구 Vol.30 No.2
이 연구는 플라이 애시를 결합재 중량의 20%, 재생굵은골재를 천연쇄석굵은 골재의 0%, 25%, 50%, 75%, 100%를 치환하여 압축강도와 동결융해 특성을 구명하였으며, 이 연구를 통해 얻어진 결과를 요약하면 다음과 같다. 1. 재령 28일의 압축강도는 모든 배합비와 W/B 35%에서 400㎏f/㎠이상으로 나타나 고강도콘크리트에 이용될 수 있을 것으로 생각된다. 2. 중량감소율은 동결융해 300사이클에서 1%미만으로 나타났고, 표면박리와 같은 현상은 나타나지 않았으며, 재생골재의 대체율이 증가할수록 감소율은 증가하였다. 3. 초음파진동속도는 동결융해 300사이클에서 19~24%정도의 감소율을 나타내었으며, 재생골재의 대체율이 증가할수록 감소율은 증가하는 경향을 나타내었다. 4. 상대동탄성계슈는 재생골재의 대체율에 따라 60~72%의 범위로 나타내었으며, 재생골재 대체율이 증가할수록 감소하는 경향을 나타내었다. 5. 내구성지수는 모든 배합에서 60이상을 나타내었으나, 재생골재 대체율이 100%일때는 급격히 떨어지는 경향을 나타내었다. 6. 재생굵은골재를 사용한 콘크리트의 압축강도, 중량감소율, 초음파진동속도, 상대동탄성계수, 내구성지수 시험결과를 볼 때, 시험에 사용한 재생굵은 골재는 고강도콘크리트에 사용이 가능할 것으로 판단된다. This study was performed to examine the freezing and thawing properties of the high strength concrete using recycled coarse aggregate. The recycled coarse aggregate was replaced by 0%, 25%, 50%, 75% and 100% of natural crushed aggregate. The compressive strength of the concrete used recycled coarse aggregate was shown in more than 400kgf/㎤ at the curing age 28 days. The weight loss ratio by freezing and thawing was shown in less than 1% at all mix type. The pulse velocity and relative dynamic modulus were decreased with increasing the freezing and thawing cycles. Also, durability factor for the freezing and thawing were decreased with increasing the content of recycled coarse aggregate. But, recycled concrete replaced with recycled coarse aggregate 100% was shown in more than 60 by durability factor in freezing and thawing of 300cycles Accordingly, these recycled coarse aggregate can be used for high strength concrete.
박상용,곽영주,강인준 釜山大學校生産技術硏究所 2004 生産技術硏究所論文集 Vol.63 No.-
습지는 한번 훼손되면 재생 불가능하고 그 대체물을 만들 수 없으므로 습지보전과 대책마련이 증요하다. 최근, 환경단체에서 자연습지 뿐만 아니라 산지습지에 대한 지속적인 생태적 조사와 발견이 중요하다는 인식이 높아지고 있다. 본 연구에서는 산지습원에 대한 기준점 측량방식으로 Total-Station과 GPS (Global Positioning System) 측량장비를 이용하여 정확한 위치를 규정하였고 지리정보(GIS) 기술을 활용하여 체계적으로 자료를 관리할 수 있는 표준화된 습지분포 수치지도를 제작하였다. 또한,복잡한 지도l 설계도면과 종합적 자료관리와 의사결 정 과정을 지원하기 위한 자료를 수치화 하였다.
성낙준 한국운동역학회 2004 한국운동역학회지 Vol.14 No.1
R. J. Sung. A Study on the Swing Path and Plane of the Club in Golf Swing. Korean Journal of Sport Biomechanics, Vol. 14, No. 1, pp. 99-115, 2004. In order to know the correct swing methods in golf swing, it is important to understand the whole swing path but also the concept of swing plane. But, most amateur golfers don't know the concept of swing plane well. Therefore this study was trying to make a good material that makes the concept of swing plane easy to understand. A good swing motion data was obtained from a professional golfer using the three dimensional DLT method. This swing motion was divided into 10 phases and evaluated using the concept of swing plane. The result of the analyze show a good matches between the path of the club and swing plane. This result was summarized as a 3 dimensional graphics to provide a good material to teach the golf swing well.
성낙준 한국운동역학회 2004 한국운동역학회지 Vol.14 No.3
R. J. SUNG. Analysis of the Angular Momentum for the Bar Clearance Motion in the Fosbury Flop. Korean Journal of Sport Biomechanics, Vol. 14, No. 3, pp. 119-134, 2004. The purpose of this study was to analyze the angular momentum characteristics of the Fosbury Flop high jump and the role of the body segments for the production of 3 angular momentum components. The subjects were three male jumpers who were former Korean national team players. Their jumping motions were analyzed using the DLT method of three-dimensional cinematography. The conclusions were as follows. 1. All the forward angular momentum needed to clear the bar was created in the take-off phase. Take-off leg was the great contributor of the forward angular momentum. On the other hand, free leg produced large opposite angular momentum. 2. All subject had some lateral angular momentum before the take-off phase. Head and free leg had major contribution to the lateral angular momentum production. Take-off leg produced opposite angular momentum. 3. All subject had some twisting angular momentum, which make the back of the athlete turn to the bar, before the take-off phase. Free leg was the major contributor of the twisting angular momentum. Head and trunk was the second contributor of the twisting angular momentum. 4. Total angular momentum needed to clear the bar had no significant correlation to the jumping height. 5. Subject who made excessive angular momentum showed different pattern of angular momentum production and had a poor record compared to other subject.