http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박성수,이창희,이현,이헌수,손명모,박희찬,Park, S.S.,Lee, C.H.,Lee, H.,Lee, H.S.,Shon, M.M.,Park, H.C. 한국재료학회 1998 한국재료학회지 Vol.8 No.12
열처리 온도 및 시간의 변화에 따라 $PbO-TiO_2$-$A1_2O_3$-$SiO_2$유리계의 열처리된 시편들에서 perovskite $PbTiO_3$ 결정의 결정화 거동을 X선 회절 (XRD)과 주사 전자 현미경 (SEM)에 의하여 조사하였다 고온에서 장시간 동안 열처리된 시편은 높은 결정화도를 나타내었다. 열처리 시간이 증가할수록 $610^{\circ}C$와 $650^{\circ}C$ 에서 열처리된 시편들의 유전 상수는 증가했지만, $800^{\circ}C$에서 열처리된 시편의 유전 상수는 감소하였다. 시편들의 손실 정접은 열처리 조건에 거의 영향을 받지 않았다. $800^{\circ}C$에서 1h, 2h 및 8h 동안 열처리된 시편들의 압전 계수는 $1.0\times10^{-12}~8.0$\times$10^{-12}C/N$ 정도 이었다. The crystallization behaviour of perovskite $PbTiO_3$ for the samples heat- treated at various temperatures for various times in the $PbO-TiO_2-A1_2O_3-SiO_2$, glass system has been investigated by the means of X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses. Higher crystallinity obtained in the sample heat-treated at higher temperature for longer time. With increasing heat-treatment time, dielectric constant of the samples heat-treated at $610^{\circ}C$ and $650^{\circ}C$ increased, but that of the sample heat- treated at $800^{\circ}C$ decreased. Loss tangent of the heat-treated samples was not much influenced by heat-treatment conditions. Piezodielectric charge constant was approximately $1.0\times10^{-12}~8.0$\times$10^{-12}C/N$ in the samples heat-treated at $800^{\circ}C$ for 1h, 2h, and 8h.
강효경,박희찬,최임숙,이현,손명모,Kang, H.K.,Park, H.C.,Choi, I.S.,Lee, H.,Son, M.M. 한국재료학회 1996 한국재료학회지 Vol.6 No.9
카올린에서 추출된 황산알루미늄 용액으로부터 촉매담체용 r-AI2O3분말 합성에 대하여 연구하였다. 황산알루미늄 용액을 교반중의 에탄올(ethanol)에 적하하여 단일상(single phase)의 AI2(So4)3 18H2O석출물을 제조하고 이 석출물의 하소로부터 r-AI2O3분말을 합성하였다. 이 분말을 100$0^{\circ}C$에서 2시간 하소하였을 때 열적안정성을 보였으나, 120$0^{\circ}C$-2시간 하소에서 $\alpha$-AI2O3 로 전이하였다. r-AI2O3의 열적안정성에 미치는 BaO 첨가의 영향을 조사 연구하였다. 첨가량은 r-AI2O3에 대해서 1.0-6.0wt%로 하였다. BaO를 4.0wt%첨가한 시료는 AI2O3-BaO.6AI2O3(hexa-aluminate)혼합상생성으로 인하여 120$0^{\circ}C$에서 r-AI2O3의 전이를 방지하는데 효과적이었다. BaO를 4.0wt%첨가한 시료와 BaO를 첨가하지 않은 시료에 대하여 r-AI2O3$\longrightarrow$ $\alpha$-AI2O3전이에 따른 비표면적을 조사하여 보았다. 120$0^{\circ}C$-2시간에서 BaO 4.0wt% 첨가한 시료와 BaO를 첨가하지 않은 시료의 비표면적은 각각 95$m^2$/g과 50$m^2$/g을 유지하였다.
Sc첨가한 Al-Mg 합금의 고온변형 거동에 미치는 결정립 크기의 영향
우기도,김석원,김학신,양창호,박희찬,박경태,Woo, K.D.,Kim, S.W.,Kim, H.S.,Yang, C.H.,Park, H.C.,MIURA, Y.,Park, K.T. 한국재료학회 2002 한국재료학회지 Vol.12 No.9
High temperature tensile test has been performed at $450^{\circ}C$ at different strain rate with various grain size due to different reduction rate of Al-4wt%Mg-0.4wt%Sc alloy which is known to be one of useful superplastic alloys. The grain size of Al-4wt%Mg-0.4wt%Sc alloy is $67~100\mu\textrm{m}$ which is courser than that of the alloy which is commonly used as the superplastic material. The total elongation of the Al-4wt%Mg-0.4wt%Sc alloy is strongly dependent on the average grain size, and is a linear function of the inverse average grain size for the present alloy.
$\textrm{CuO}-\textrm{Bi}_{2}\textrm{O}_3-\textrm{V}_2\textrm{O}_5$계 글라스에서 조성 변화에 따른 전기 전도도의 특성
박성수,정동진,이현,박찬영,민성기,박희찬,Park, S.S.,Jeong, D.J.,Lee, H.,Park, C.Y.,Min, S.K.,Park, H.C. 한국재료학회 1998 한국재료학회지 Vol.8 No.12
CuO-Bi$_2$O$_3$-V$_2$O$_{5}$ 삼성분계 유리 시편을 열처리 시간과 온도를 달리하여 열처리 하였을 때, 열처리된 시편의 결정화 거동 및 전기전도도 특성을 조사하였다. 여러 조성의 시편들 가운데 31CuO-14Bi$_2$O$_3$-55V$_2$O$_{5}$ (mol%)의 조성을 가진 시편이 상온에서 가장 높은 전기 전도도를 나타내었고, 이 시편을 358$^{\circ}C$에서 8h동안 열처리하여 결정화 시켰을 때, 고체 전해질용으로서는 매우 높은 전기 전도도 값인 2.67$\times$$10^{-2}$ $\Omega$$^{-1}$ $cm^{-1}$ /를 나타내었다. 유리상의 시편을 열처리 하였을 때 열처리된 시편은 BiVO$_4$ 및 CuvVO$_3$결정의 형성과 성장이 이루어지면서 전기 전도도가 비열처리 시편에 비하여 $10^3$-$10^4$배 크기로 증가하였다. The crystallization behaviors and electrical conductivities of the glasses heat-treated at various times and temperatures in the CuO-Bi$_2$O$_3$-V$_2$O$_{5}$ glass system were investigated. Among glass samples with various compositions, the highest conductivity obtained in the 31CuO-14Bi$_2$O$_3$-55V$_2$O$_{5}$ (mol%) glass sample. The 31CuO-14Bi$_2$O$_3$-55V$_2$O$_{5}$ (mol%) glass sample crystallized by heat treatment at 358$^{\circ}C$ for 8h had 2.67$\times$10$^{-2}$ $\Omega$$^{-1}$ $cm^{-1}$ /, which was much high value as a solid electrolyte. Compared to the glass sample, the heat- treated glass sample was increased in conductivity by an order of 10$^3$-10$^4$due to the formation and growth of BiVO$_4$ and CuVO$_3$crystals.
이상근,김형섭,강범수,서금석,박성수,박희찬,Lee, S.G.,Kim, H.S.,Kang, B.S.,Seo, G.S.,Park, S.S.,Park, H.C. 한국재료학회 2006 한국재료학회지 Vol.16 No.6
Fine silica powders were synthesized via w/o emulsion method using sodium silicate, ammonium sulfate, Triton N-57, and cyclohexane as silica source, precipitating agent, surfactant, and oil phase, respectively. The powders were prepared under a conventional process and an ultrasonic process using the same reactants at room temperature for 1 hr varying the concentration of $Na_2SiO_3$ solution and the mol ratio of $H_2O$/surfactant, respectively. The particle size of the silica powder was reduced with decreasing the concentration of sodium silicate solution and with increasing the mol ratio of $H_2O$/surfactant under with and without ultrasounds. The size of powder with ultrasounds was smaller than that without ultrasounds, which indicates that the application of ultrasound in the synthesis of silica powder is an efficient way to reduce particle size.