http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
언더필 재료를 사용하는 Cu/Low-K 플립 칩 패키지 공정에서 신뢰성 향상 연구
홍석윤,진세민,이재원,조성환,도재천,이해영,Hong, Seok-Yoon,Jin, Se-Min,Yi, Jae-Won,Cho, Seong-Hwan,Doh, Jae-Cheon,Lee, Hai-Young 한국마이크로전자및패키징학회 2011 마이크로전자 및 패키징학회지 Vol.18 No.4
현대 전자 산업에서Cu/Low-K공정의 도입을 통해 반도체 칩의 소형화 및 전기적 성능 향상이 가능해졌으나, Cu/Low-K는 기존의 반도체 제조 공정에 사용된 물질에 비해 물리적으로 매우 취약해진 단점을 가지고 있어 칩 제조 공정 과 패키지 공정에서 많은 문제를 유발하고 있다. 특히, 온도 사이클 후, Cu 층과 Low-K 유전층 사이의 박리현상은 주요 불량 현상의 하나이다. Cu/Low-K층은 플립 칩 패드의 상부에 위치하기 때문에 플립 칩이 받는 스트레스가 직접적으로 Cu/Low-K층에 영향을 주고 있다. 이런 문제를 해결하기 위한 언더필 공정이나 언더필 물질의 개선이 필요하게 되었고 특히, 플립 칩에 대한 스트레스를 줄이고 솔더 범프를 보호하기 위한 언더필의 선택이 중요하게 되었다. 90 nm Cu/Low-K 플립 칩 패키지의 온도 사이클 후 발생한 박리 문제를 적합한 언더필 선택을 통해 해결하였다. The size reduction of the semiconductor chip and the improvement of the electrical performance have been enabled through the introduction of the Cu/Low-K process in modern electronic industries. However, Cu/Low-K has a disadvantage of the physical properties that is weaker than materials used for existing semiconductor manufacture process. It causes many problems in chip manufacturing and package processes. Especially, the delamination between the Cu layer and the low-K dielectric layer is a main defect after the temperature cycles. Since the Cu/Low-K layer is located on the top of the pad of the flip chip, the stress on the flip chip affects the Cu/Low-K layer directly. Therefore, it is needed to improve the underfill process or materials. Especially, it becomes very important to select the underfill to decrease the stress at the flip-chip and to protect the solder bump. We have solved the delamination problem in a 90 nm Cu/Low-K flip-chip package after the temperature cycle by selecting an appropriate underfill.
음향공진과 맥진동 현상을 이용한 폐수처리용 산기관 개발 및 성능시험
홍석윤,문종덕,Hong, Suk-Yoon,Moon, Jong-Duck 한국음향학회 1996 韓國音響學會誌 Vol.15 No.6
음파와 진동에너지를 활용하는 음파기술의 응용 연구분야로 음향공진 및 맥진동 현상을 이용하여 기액상에서 산소절달효율을 극대화 할 수 있는 폐수처리용 음향공진 산기관의 개념을 제안하였으며 원리와 성능시험을 수행하였다. 또한 저압용 헬름흘쯔 공진기, 실린더형 및 고리형 반사공진기 그리고 복합 공진시스템의 설계개념과 원리를 구현하였다. 물질전달 과정을 촉진하는 음향공진 에너지는 산소전달효율을 높여주며, 노즐에서 분출하는 공기 제트의 불평형에 의해 발생하는 주기적인 맥진동 현상은 미세한 공기방울을 만들어 내는데, 이 두가지 원리가 가장 잘 적용되는 고리형 반사공진기(AJR)의 성능이 가장 우수한 것으로 평가되었으며 기존의 산기관 보다도 $20{\sim}30%$ 정도 높은 효율을 실험으로 확인하였다. Using the acoustic resonances and oscillatory pulsations considered as the branch of wave technologies, the concept of the acoustic resonance diffusers for waste water treatment which maximize the oxygen transfer efficiency in gas-liquid two phase medium have been proposed, and studies for the principles and performance tests were accomplished. Besides, the design concepts for the low pressure Helmholtz resonator, cylinder and annular type reflection resonator and combined type resonance system have been implemented. The acoustic resonance energy which can speed up the mass transfer process increase the oxygen transfer efficiency, and periodic pulsations generated from the instability of air jet from nozzle make very small air bubbles. Then, the annular type jet resonator(AJR) applying these two principles successfully was evalulated as the most promising device and also the efficiency showing $20{\sim}30%$ better than conventional diffusers has been verified experimentally.
홍석윤(Suk-Yoon Hong),김태경(Tae-Gyoung Kim),송지훈(Jee-Hun Song),권현웅(Hyun-Wung Kwon),공영모(Young-Mo Kong),이철원(Chul-Won Lee),이준수(Jun-Su Lee) 한국소음진동공학회 2016 한국소음진동공학회 학술대회논문집 Vol.2016 No.4
Acoustic performance of HVAC (Heating, Ventilating and Air Conditioning) silencers is generally predicted by theoretical formulation derived from acoustic wave equation and existing empirical formulations suggested by the National Environmental Balancing Bureau (NEBB). In this paper, the limitation of theoretical approaches to predict acoustic performance of silencers is studied, and also the way in which the acoustic performance of large size silencers can be predicted using computational analysis is discussed. The absorption coefficients of rectangular lagging silencers are obtained from existing experimental data using computational analysis.
중고주파대역의 차량 소음진동해석 S/W-PFADS 개발 및 해석 예
홍석윤(Suk-yoon Hong),박영호(Young-ho Park),서성훈(Seong-hoon Seo) 한국자동차공학회 2003 한국자동차공학회 Symposium Vol.2003 No.9
The Power Flow Finite Element Method(PFFEM) offers very promising results in predicting the vibration responses of system structures. PFFEM software, PFADS has been developed for the vibration predictions and analysis of coupled system structures in medium-to-high frequency ranges. PFFEM is numerical method which solves energy governing equation using finite element technique for complicated structures where the exact solutions are not available. Through the upgrades, the current version PFADS R3 could cover the general beam and plate structures including various kinds of beam-plate rigid joints, spring-damper connection and rigid body connection within beam and plate in addition. This software is composed of 3 parts; translator. model converter and solver. The translator makes its own FE-model from bulk data of commercial FE software, and the model converter is used to convert FE-model to PFFE-model automatically. The solver calculates vibrational energy density and intensity for PFFE-model by solving global matrix equations of PFFEM. For the applications of real vehicle systems, some of vehicle models arc examined with respect to major parameters, and reliable results are obtained
[진동 소음부문] 차량의 중고주파 진동해석을 위한 파워흐름해석 프로그램의 개발현황과 이를 이용한 승용차의 진동해석 예
홍석윤(Suk-yoon Hong),박영호(Young-ho Park) 한국자동차공학회 2001 한국자동차공학회 춘 추계 학술대회 논문집 Vol.2001 No.11_2
To predict vibrational energy density and intensity of complex structures in medium-to-high frequency ranges, Power Flow Finite Element Method(PFFEM) programs for the plate and beam elements are developed at present. The energy density and intensity of automobile is predicted using the developed PFFEM program.
Permeable FW-H 방법을 이용한 원형 실린더 주변의 난류유동소음해석
최원석,홍석윤,송지훈,권현웅,정철민,Choi, Woen-Sug,Hong, Suk-Yoon,Song, Jee-Hun,Kwon, Hyun-Wung,Jung, Chul-Min 해양환경안전학회 2014 海洋環境安全學會誌 Vol.20 No.6
난류유동에 의한 소음은 계산비용의 관점에서 음향 상사법을 이용하여 전산유체 기법과 결합해 다양한 해석모델이 연구되고 있다. FW-H 음향상사법을 이용한 유동소음해석의 연구가 활발히 이루어지고 있으나, 기존 문헌들의 결과에서는 계산비용의 관점에서 난류유동에 의한 소음성분을 생략하고 있다. 그러나, 최근의 연구에서 유동소음특성에 있어 난류소음의 중요성이 밝혀진바 있다. 본 논문에서는 RANS 난류모델과 투과성 경계면을 이용한 Permeable FW-H 음향상사법을 이용한 난류유동소음해석에 대해 연구하였다. 2D실린더에 대하여 직접적으로 변동압력을 추출하는 직접법과 난류성분을 고려하지 않은 FW-H 상사법, 또 난류소음의 성분을 포함하는 Permeable FW-H 방법의 경우를 비교하였다. Permeable FW-H 방법을 통해 일반적으로 적용되는 FW-H 방법에서 해석 불가능한 난류에 의한 소음의 영향을 기존의 FW-H 방법과 동일한 계산비용으로 예측할 수 있었고, 적절한 투과성 경계면 설정을 통해 높은 정확도의 해석이 가능했다. Permeable FW-H 방법을 통한 난류유동해석 절차를 확립하였으며, 그 유용성을 확인했다. Varieties of research on turbulent-induced noise is conducted with combinations of acoustic analogy methods and computational fluid dynamic methods to analyze efficiently and accurately. Application of FW-H acoustic analogy without turbulent noise is the most popular method due to its calculation cost. In this paper, turbulent-induced noise is predicted using RANS turbulence model and permeable FW-H method. For simplicity, noise from 2D cylinder is examined using three different methods, direct method of RANS, FW-H method without turbulent noise and permeable FW-H method which can take into account of turbulent-induced noise. Turbulent noise was well predicted using permeable FW-H method with same computational cost of original FW-H method. Also, ability of permeable FW-H method to predict highly accurate turbulent-induced noise by applying adequate permeable surface is presented. The procedure to predict turbulent-induced noise using permeable FW-H is established and its usability is shown.
파워흐름유한요소법에 의한 중고주파수 영역에서 단순 평판의 진동 해석
서성훈,홍석윤,길현권,허영,Seo, Seong-Hoon,Hong, Suk-Yoon,Kil, Hyun-Gwon,Huh, Young 한국전산구조공학회 2003 한국전산구조공학회논문집 Vol.16 No.2
본 논문에서는 중고주파수 영역에서 진동하는 단순평판의 진동을 해석하기 위하여 파워흐름유한요소법을 적용하였다. 파워흐름해석법에서 주어지는 진동 에너지지배방정식의 해를 구하기 위한 수치해석 도구로써 유한요소법을 활용하였다. 이러한 파워흐름유한요소법을 적용하여 중고주파수 영역에서 진동하는 단순평판의 진동 변위와 진동인텐시티 분포를 구하였다. 또한 수치해 결과를 엄밀해와 유한요소법에 의한 근사해와 비교함으로써, 파워흐름유한요소법은 중고주파수 영역에서 진동 변위 및 진동 인텐시티를 예측하기 위하여 효과적으로 적용될 수 있음을 보였다. In this paper Power Flow Finite Element Method(PFFEM) has been implemented to analyze the vibration of a plate in mid and high frequency ranges. In order to solve the vibration energy governing equation in Power Flow Analysis(PFA), The Finite Element Method(FEM) was used as a numerical tool. It allowed one to predict the distribution of displacement and Intensity in the plate vibrating at mid and high frequencies. The results were compared with the analytical solutions and the approximate FEM solutions. The comparison showed that PFFEM can be an effective tool to analyze the structural vibration in mid and high frequency ranges.