http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최병학,최원열,심종헌,박찬희,강주희,김승언,현용택,Choe, Byung Hak,Choi, Won-Youl,Shim, Jong Heon,Park, Chan Hee,Kang, Joo-Hee,Kim, Seung Eon,Hyun, Yong Taek 한국재료학회 2015 한국재료학회지 Vol.25 No.8
Microstructural analysis of a (${\alpha}+{\beta}$) Ti alloy was investigated to consider phase transformation in each step of the thermo-mechanical process using by SEM and TEM EDS. The TAF (Ti-6Al-4Fe) alloy was thermo-mechanically treated with solid solution at $880^{\circ}C$, rolling at $880^{\circ}C$ and annealing at $800^{\circ}C$. In the STQ state, the TAF microstructure was composed of a normal hcp ${\alpha}$ and metastable ${\beta}$ phase. In a rolled state, it was composed of fine B2 precipitates in an ${\alpha}$ phase, which had high Fe segregation and a coherent relationship with the ${\beta}$ matrix. Finally, in the annealing state, the fine B2 precipitates had disappeared in the ${\alpha}$ phase and had gone to the boundary of the ${\alpha}$ and ${\beta}$ phase. On the other hand, in a lower rolling temperature of $704^{\circ}C$, the B2 precipitates were more coarse in both the ${\alpha}$ and the boundary of ${\alpha}$ and ${\beta}$ phase. We concluded that microstructural change affects the mechanical properties of formability including rolling defects and cracks.
Aerosol Deposition 법을 이용한 광촉매 $TiO_2$ 박막 제조
최병규,민석홍,김종오,강경태,최원열,Choi Byung-Kyu,Min Seok-Hong,Kim Jong-Oh,Kang Kyong-Tae,Choi Won-Youl 한국마이크로전자및패키징학회 2004 마이크로전자 및 패키징학회지 Vol.11 No.4
We fabricates the $TiO_2$ thin film from anatase phase $TiO_2$ powder having good photocatalytic property using aerosol deposition method at room temperature. Aerosol deposition method, which sprays an aerosol powder with ultrasonic velocity and deposits a thin film on substrate at low temperature, has the advantages of low thermal stress and low cost. To fabricate the $TiO_2$ thin film, the aerosol bath pressure and chamber pressure were 500 torr and 0.4 torr, respectively. The difference of aerosol bath pressure and chamber pressure accelerated the $TiO_2$ nano powder to ultrasonic velocity through the nozzle of $0.4 mm{\times}10 mm$ and $TiO_2$ thin film was finally formed. SS mesh with diameter of 50 mm was used as a substrate to apply the $TiO_2$ thin film to water quality purification. The raw powder was dehydrated for the good dispersion of $TiO_2$ powder. To suppress the formation of second particle, the powder was dispersed for 90 min in alcohol bath by ultrasonic treatment and desiccated. The grain size of $1 {\mu}m$ was observed in $TiO_2$ thin film deposited on SUS mesh by scanning electron microscopy (SEM). The anatase phase of $TiO_2$ thin film was also observed by X-ray diffraction (XRD) and the anatase phase of raw powder was nicely maintained after aerosol deposition. The results are applicable to water treatment filter having photocatalytic reaction. 본 논문은 광 활성도가 가장 좋은 아나타제(anatase)상의 광촉매 $TiO_2$분말을 상온에서 aerosol deposition 법을 사용하여 박막을 제조하였다. 이런 제조 방법은 aerosol 분말을 초음속으로 분사하여 기판에 증착시키는 방법으로, 저온에서 박막증착이 가능하여 thermal stress를 줄일 수 있고, 공정 단가를 낮출 수 있다는 장점이 있다. 박막 제조시 aerosol bath의 압력은 500 torr이고, chamber의 압력은 0.4 torr 였다. 이런 압력차는 $0.4 mm{\times}10 mm$의 크기의 노즐을 통해 $TiO_2$ 나노 분말을 초음속으로 가속하여 기판에 증착시켰다. 박막 제조를 위해 사용한 기판은 수질정화에 응용하기 위해 직경 50 mm인 원판 SUS mesh를 사용하였다. $TiO_2$ 분말의 고른 분포를 위해 $TiO_2$ 분말에 함유되어 있는 수분을 제거하고 이차 입자의 생성을 억제하기 위해서 알코올 bath 속에서 90분간 초음파 세척을 한 후 건조하였다. SUS mesh 위에 증착되어 있는 $TiO_2$ 박막의 입자크기를 알아보기 위해 주사 현미경(SEM)으로 분석하였으며, $1 {\mu}m$정도의 입자 크기를 관찰 할 수 있었다. X-ray diffraction (XRD) 분석 결과 aerosol deposition 후에도 분말의 anatase상은 그대로 유지되었으며, 이런 결과는 광촉매 작용을 이용한 수처리용 필터로 활용이 가능하다.
광촉매 응용을 위한 TiO<sub>2</sub> 나노 섬유의 미세구조 제어
이창규,김완태,나경한,박동철,양완희,최원열,Lee, Chang-Gyu,Kim, Wan-Tae,Na, Kyeong-Han,Park, Dong-Cheol,Yang, Wan-Hee,Choi, Won-Youl 한국전기전자재료학회 2018 전기전자재료학회논문지 Vol.31 No.6
$TiO_2$ has excellent photocatalytic properties and several studies have reported the increase in its specific surface area. The structure of $TiO_2$ nanofibers indicates promising improved photocatalytic properties and these nanofibers can thus potentially be applied in air pollution sensors and pollutant removal filters. In this study, a $TiO_2$ nanofiber was fabricated by the electrospinning method. The fabrication processing factors such as the applied voltage, the distance between nozzle and collector, and the inflow rate of solution were controlled. The precursor was titanium (IV) isopropoxide and as-spun $TiO_2$ nanofibers were heated at $450^{\circ}C$ for 2 h to obtain an anatase crystalline structure. The microstructure was analyzed using field emission scanning electron microscope (FE-SEM) and X-ray diffraction analysis (XRD). The anatase phase was observed in the $TiO_2$ nanofibers after heat treatment. The diameter of $TiO_2$ nanofibers increased with the flow rate, but decreased with decreasing applied voltage and nozzle to collector distance. The diameter of $TiO_2$ nanofibers was controlled in the range of 364 nm to 660 nm. These nanofibers are expected to be very useful in photocatalytic applications.
전기 방사 공정의 제조 변수를 이용한 TiO<sub>2</sub> 나노섬유의 직경 제어
윤한솔,김보성,김완태,나경한,이정우,양완희,박동철,최원열,Yoon, Han-Sol,Kim, Bo-Sung,Kim, Wan-Tae,Na, Kyeong-Han,Lee, Jung-Woo,Yang, Wan-Hee,Park, Dong-Cheol,Choi, Won-Youl 한국결정성장학회 2021 한국결정성장학회지 Vol.31 No.1
TiO2는 물리적, 화학적 안정성이 높고, 신체에 무해하여 태양전지, 치과용 임플란트 및 광촉매 같은 다양한 분야에서 사용되어 왔다. 비표면적이 큰 TiO2 나노섬유는 생체 친화성 제품에서 좋은 반응성과 공기 및 수질 정화시 우수한 광촉매 특성을 보여주었다. TiO2 나노섬유를 제조하기 위해 전기방사법을 사용하였으며, 제조 변수에 따른 직경 변화를 관찰하기 위해 precursor 성분 변수와 공정 변수로 구분하여 미세구조 변화를 분석하였다. Precursor 성분 변수로는 PVP(Polyvinylpyrrolidone) 및 TTIP(Titanium(IV) isopropoxide)의 농도를 선택하였고, 공정 변수로는 주입 속도와 인가 전압을 선택하였다. TiO2 나노섬유의 미세구조와 결정구조는 FE-SEM(Field emission scanning electron microscope)와 XRD(X-ray diffraction)을 이용하여 분석하였다. 450℃에서 3시간 열처리 공정을 통해, 평균 직경 약 0.27 ㎛에서 1.31 ㎛를 갖는 asspun TiO2 나노섬유가 0.22 ㎛에서부터 0.78 ㎛의 평균 직경을 갖는 anatase 상의 TiO2 나노섬유로 상전이 됨을 확인할 수 있었다. 평균 직경 0.22 ㎛의 anatase TiO2 나노섬유는 비 표면적 증대에 의한 광촉매 특성 향상을 기대할 수 있다. 또한 TiO2 나노섬유의 직경 변화를 위해서는 주입 속도 및 인가 전압과 같은 공정 변수보다는 PVP 농도 및 TTIP 농도와 같은 precursor 성분 변수를 제어하는 것이 더욱 효과적이었다. TiO2 has been used in various fields such as solar cells, dental implants, and photocatalysis, because it has high physical and chemical stability and is harmless to the body. TiO2 nanofibers which have a large specific surface area also show a good reactivity in bio-friendly products and excellent photocatalysis in air and water purification. To fabricate TiO2 nanofibers, an electrospinning method was used. To observe the diameter of TiO2 nanofibers with fabrication variables, the fabrication variables was divided into precursor composition variables and process variables and microstructure was analyzed. The concentrations of PVP (Polyvinylpyrrolidone) and TTIP (Titanium(IV) isopropoxide) were selected as precursor composition variables, and inflow velocity and voltage were also selected as process variables. Microstructure and crystal structure of TiO2 nanofibers were analyzed using FE-SEM (Field emission scanning electron microscope) and XRD (X-ray diffraction), respectively. As-spun TiO2 nanofibers with an average diameter of about 0.27 ㎛ to 1.31 ㎛ were transformed to anatase TiO2 nanofibers with an average diameter of about 0.22 ㎛ to 0.78 ㎛ after heat treatment of 3 hours at 450℃. Anatase TiO2 nanofibers with an average diameter of 0.22 ㎛ can be expected to improve the photocatalytic properties by increasing the specific surface area. To change the average diameter of TiO2 nanofibers, the control of precursor composition variables such as concentrations of PVP and TTIP is more efficient than the control of electrospinning process variables such as inflow velocity and voltage.