http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정수 슬러지를 혼합한 계룡산 철화 분청사기 고강도 소지 개발
임성호,이병하,Lim, Seong-Ho,Lee, Byung-Ha 한국재료학회 2013 한국재료학회지 Vol.23 No.6
First, a purified sludge was calcined at various temperatures viz. 800, 900, 1000, 1100 and $1200^{\circ}C$ per hour. Subsequently 100 wt% of ware from Geryong mountain was mixed with 5~25 wt% of a purified sludge. Then the ware was treated at $1250^{\circ}C$ in an electric kiln to test a bending strength. The physicochemical property of the prepared ware was characterized by XRD, Raman and SEM analysis. Among the different percentage, 25 wt% of a ware in a purified sludge calcined at $1000^{\circ}C$ showed 689 $kg/cm^2$ strength. Also the purified sludge calcined at $1000^{\circ}C$ was adequate physical properties than the other composites. Further to enhance the physical strength, 3 wt% $TiO_2$ (a mineralizer) was added into the ware and the strength was increased up to 731 $kg/cm^2$. The composites exhibit absorption and porosity rates of 0.17% and 0.39% respectively.
Image Cut Raman Microscope을 사용한 계룡산 철화 분청사기 연구
임성호,김영범,이병하,Lim, Seong-Ho,Kim, Young-Bum,Lee, Byung-Ha 한국세라믹학회 2010 한국세라믹학회지 Vol.47 No.4
Chulwha pieces collected from Hakbong-ri site in Keryong mountain were studied whether there is reactions or not in each layer to investigate firing condition of glaze, body, Chulwha, engobe of Buncheong ware in the early Chosun Dynasty, 15th~16th Century. As a result of XRD analysis of a Chulwha piece, a main crystal phase was $\alpha$-Quartz and a second was Mullite. It was assumed the firing temperature would be around $1200^{\circ}C$ because a little amount of Mullite was formed in the body and there was no phase transition $\alpha$-Quartz to cristobalite. As a result of ICRM analysis, Chulwha and glaze didn't react and the melted glazes were sunk into the Chunwha particles. The thin layer of glaze was found on the Chulwha layer. As a result, the color of Chulwha layer always came to vivid black. Moreover, Chulwha painting didn't spread over the Buncheong ware, because Chulwha and engobe didn't react. The boundary interface of engobe and body was not clear because they had similar compositions. This shows engobe was composed of more $Al_2O_3$ than body.
임성호,김금선,박주석,이병하,Lim, Seong-Ho,Kim, Gumsun,Park, Joo-Seok,Lee, Byung-Ha 한국재료학회 2013 한국재료학회지 Vol.23 No.4
We collected Seokganju minerals (regions in Gyeryong Mountain, Sangsin-ri, Banpo-myeon, Gongju Chungcheongnam-province), which were used as natural color pigments for grayish-blue during the 15th~16th centuries of the Joseon era, and investigated their crystallographic features to develop a black pigment having a spinel structure. By a Raman analysis, the color of Seokganju under transparent glaze as a pigment for painting was black because hematite ($Fe_2O_3$) in Seokganju was converted to magnetite ($Fe_3O_4$) However, Seokganju into the transparent glaze as a pigment was brown because of hematite ($Fe_2O_3$) and small amounts of maghemite (${\gamma}-Fe_2O_3$) in Seokganju minerals. Only Seokganju mineral is used, it is not suitable for black pigment into the transparent glaze. This study tried to develop a spinel crystal black pigment stabilized by Seokganju with CoO, $Cr_2O_3$, NiO, and $MnO_2$ at $1280^{\circ}C$. A Raman spectroscopy analysis was performed to verify the presence of Mn The results showed that it existed as spinel, and two crystal phases $CoFe_2O_4$ and $MnFe_2O_4$ were mixed. $CoFe_2O_4$ spinel has a dark grayish black color and $MnFe_2O_4$ spinel has a greenish black color, and these two appeared as black. The color of a specimen calcined by adding 6 wt% of pigment mixed with 5 wt% of $MnO_2$ added to lime glaze was analyzed with a UV spectrophotometer. When applying the color pigment, it appeared black stabilized with $L^*$24.23, $a^*$ 0.12, $b^*$ -2.29 at $1260^{\circ}C$ oxidative calcination, With $1240^{\circ}C$ reduction firing, it is appeared black stabilized with low brightness of $L^*$ 23.13, $a^*$ -1.12, $b^*$ 0.54.
임성호(林成浩,LIM Seong-Ho) 신아시아연구소(구 신아세아질서연구회) 2009 신아세아 Vol.16 No.3
이 글은 2000년대 초중반 세계적으로 분출된 반미 감정은 무엇을 대상으로 하는지 관찰하고 그 결과의 의미에 대해 추론한다. 여러 나라에서의 여론조사를 분석한 결과, 미국에 대한 각국의 반감은 부시 대통령이나 일방주의 대외정책과 같은 좁은 대상뿐 아니라 미국, 미국인, 미국체제 전체라는 총체적, 거시적, 추상적 대상까지 포괄하는 방향으로 변하는 추세를 보였다. 이러한 총체적 반미 감정의 고조가 의미하는 바는 무엇일지 이론적으로 추론해볼 때, 세계 각국과 미국 양측에서 공히 이념적 영향력이 커졌음을 의미할 것이라고 해석할 수 있다. 세계 각지에서 이념성향이 커지며 미국 전체가 반감의 대상이 될수록, 또한 미국사회에서 이념적 색채가 증가하며 반미 측에 대한 총체적 반감이 커질수록, 상호 반감은 서로를 강화시키는 악순환을 낳을 수 있다. This article observes what the global anti-American sentiment in the early-to-mid 2000’s targeted, and infers on its implications. Analysis of poll data shows that global antipathy to the U.S. has shifted from a narrow focus on concrete subjects such as President Bush or U.S. unilateral foreign policy toward a broader, all-encompassing target of such general, abstract subjects as America, Americans, or the U.S. system itself. This rise of totalizing anti-American sentiment targeting the whole America, it is posited, may signify an increase of ideological influences in both the world and the U.S. As intensifying ideological factors in various parts of the world fuel a totalizing anti-Americanism in the psyche of the global public, and as nationalistic ideology brews in the minds of Americans a strong feeling of collective disdain to non-American (needless to say about anti-American) voices, these mutual totalizing antipathies in both sides tend to further reinforce each other in a vicious cyclic pattern.
임성호 ( Seongho Lim ),박상원 ( Sangwon Park ) 한국정보처리학회 2010 한국정보처리학회 학술대회논문집 Vol.17 No.2
닌텐도 위 출시 이후 가속센서를 활용한 체감형 게임기에 관한 관심이 급증하고 있다. 닌텐도의 경우 위 리모트에 가속센서를 탑재하여 사용자가 라켓이나 배트를 휘두르는 것과 같은 조작이 가능하게 한다. 스마트폰 또한 가속센서를 내장해 출시되고 있기 때문에 스마트폰의 가속센서를 활용해 게임을 개발할 수 있다. 하지만 스마트폰 플랫폼은 다양하기 때문에 한 플랫폼에서 개발을 완료하였다 하더라도 다른 플랫폼에서 동작하려면 대상 플랫폼에 맞게 프로그램을 재작성 해야 하는 단점이 있다. 해결책으로 웹 어플리케이션이 제안되어 왔다. 그러나 웹 어플리케이션은 자바스크립트 보안 정책 때문에 파일시스템, 센서 등로컬 자원에 대한 접근이 불가능하다. 이러한 단점을 극복하고자 웹 어플리케이션이 센서를 조작하고 파일시스템에 접근할 수 있도록 지원하는 PhoneGap, BONDI 등의 솔루션이 개발되었다. 본 논문은 센서를 사용한 웹 게임의 구현을 통해 센서를 이용한 웹 게임 개발 방법을 제시한다.
임성호(Sung-Ho Lim),김경수(Kyungsoo Kim),최지웅(Ji-Woong Choi) 한국통신학회 2014 韓國通信學會論文誌 Vol.39 No.7(통신이론)
전송 데이터 용량의 요구치가 급속히 증가하면서 공간 스트림마다 독립된 정보를 전송할 수 있는 spatial multiplexing (SM) 기반 multi-input multi-output (MIMO) 기술에 대한 관심이 증대되고 있다. 3GPP LTE-advanced, IEEE 802.11ac 등의 최근 표준들에서는 최대 8개까지의 공간 스트림을 지원하고 있으며, beyond 4G 시스템의 핵심 기술로 고려되고 있는 massive MIMO나 mm-wave 시스템에서는 수십~수백개 이상의 안테나까지도 지원을 고려하고 있다. SM MIMO 시스템의 최적 복조 기법인 maximum likelihood (ML) 방식의 연산복잡도는 안테나수에 지수적으로 증가하므로, 안테나 수의 급속한 증가는 연산량의 급격한 증가를 유발하게 되어 낮은 복잡도로 구현 가능한 수신 기법들에 대한 필요성을 증대시키게 되었다. 본 논문에서는 이러한 SM MIMO 복조 기법들에 대한 연구 결과들을 설명한다. 또한, 기존의 복조 기법들과 달리, 지수적으로 복잡도의 증가가 필요하지 않는 간단한 선형 기법에 기반한 massive MIMO 시스템용 수신 기법에 대해서도 설명하고 향후의 시스템 디자인 시 고려할 사항들에 대해 간략히 정리한다. With the increasing demands on high data rate, there has been growing interests in multi-input multi-output (MIMO) technology based on spatial multiplexing (SM) since it can transmit independent information in each spatial stream. Recent standards such as 3GPP LTE-advanced and IEEE 802.11ac support up to eight spatial streams, and massive MIMO and mm-wave systems that are expected to be included in beyond 4G systems are considering employment of tens to hundreds of antennas. Since the complexity of the optimum maximum likelihood based detection method increases exponentially with the number of antennas, low-complexity SM MIMO detection becomes more critical as the number of antenna increases. In this paper, we first review the results on the detection schemes for SM MIMO systems. In addition, massive MIMO reception schemes based on simple linear filtering which does not require exponential increment of complexity will be explained, followed by brief description on receiver design for future high dimensional SM MIMO systems.