http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
참외 수경재배에서 줄기 유인 방법에 따른 수확량 및 작업 강도 비교
이동수,권진경,윤성욱,이시영,서민태,이희주,이상규,강태경,Lee, Dong Soo,Kwon, Jin Kyung,Yun, Sung Wook,Lee, Si Young,Seo, Min Tae,Lee, Hee Ju,Lee, Sang Gyu,Kang, Tae Gyoung 한국생물환경조절학회 2021 생물환경조절학회지 Vol.30 No.4
참외는 줄기를 땅 위에서 포복재배로 유인하는 것이 일반적으로써 노동강도가 강해서 농업인 근골격계 질환의 원인이 되므로 작업강도를 낮추고 품질도 향상시키기 위한 새로운 재배 방법을 찾고자 본 실험을 수행하였다. 그 결과, 줄기를 상향으로 유인하는 처리구가 생육 및 광합성 특성이 좋았고, 근활력은 하향 줄기 유인 처리구에서 좋은 것으로 나타났다. 상품 수량에 있어서는 상향 처리구가 4.055kg/10a, 하향 처리구가 3,983kg/10a으로 통계적인 유의성은 없었다. 줄기유인 작업에 대한 작업자세 평가의 경우, 기존 포복재배가 상향, 하향 재배방식 보다 위험수준이 높은 것으로 평가되었다. 결론적으로, 참외 수경 수직재배는 작물 생육, 수확량 및 작업 노동강도 등을 고려해 볼 때 기존 포복재배 방식을 대체할 수 있는 새로운 재배방법이라고 판단되고, 참외 줄기 유인 방법별로 수량 등에 유의성이 없으므로 상향 줄기유인 방법이나 하향 줄기 유인방법 중에서 하우스의 구조나 재배자의 의향에 따라서 선택하여 수직재배를 하면 될 것으로 사료된다. Oriental melon (Cucumis melo L.) is generally cultivated on the ground by creeping culture. A farmer has a higher workload for training stems. This study was conducted to find out a new cultivation of oriental melon to reduce a workload and improve the quality of fruit. There were three treatments for training stem of oriental melon; upward stem growing, downward stem growing, control (creeping stem growing). The results of the plant growth and the net photosynthesis showed higher in upward stem growing. The root activity was higher in downward stem attract. The yield was not significant as 4,055kg/10a in upward stem attract and 3,983kg/10a in downward stem attract. According to the results of the ergonomic agricultural workload evaluation, in the case of the working posture, the working posture of creeping cultivation methods (squatting, bending) showed a higher risk level than the upward and downward cultivation methods. Therefore, it is recommended the upward stem attract of oriental melon is a new cultivation as well as an alternative method for creeping stem attract in terms of improving the plant growth and yield, and reducing the workload.
Fabry-Perot 레이저 다이오드의 Missing Mode
이동수,Lee, Dong-Soo 한국조명전기설비학회 2005 조명·전기설비학회논문지 Vol.19 No.1
Fabry-Perot 레이저 다이오드의 missing mode의 원인으로 의심되는 활성층 내의 구조적 결함과 리플의 영향을 TDLM(time domain laser model)방식을 사용하여 모델링하였다. 보다 정확한 모델링의 결과를 얻기 위하여 여러가지 비선형 효과를 추가 고려하였다. 이를 이용하여 레이저 다이오드를 시뮬레이션하였고, 모드 스펙트럼(mode spectrum)을 구하였다. 실제 레이저 다이오드의 missing mode를 측정하기 위한 실험 장비를 구성하여 측정 결과를 추출하였고, 시뮬레이션과 측정 실험 결과로부터 결론을 내렸다. Mode missing of Fabry-Perot laser diodes has been modeled using the time domain laser model(TDLM). Fabry-Perot laser diodes that have structure of ripple in the waveguide of active layer or defects inside the active layer were simulated. For accurate simulation, the nonlinear effects were included such as spatial hole burning(SHB) and gain saturation. From the simulation results, it was founded that the defect inside the active layer in laser diodes has a strong influence on mode missing rather than the waveguide ripple. The simulation results are confirmed with the fabricated Fabry-Perot laser diodes by measuring the longitudinal mode spectra as a function of temperature from $25[^{\circ}C]\;to\;85[^{\circ}C]$.
이동수,윤영호,박성,이병하,Lee, Dong-Soo,Yun, Young-Ho,Park, Sung,Lee, Byung-Ha 한국세라믹학회 1997 한국세라믹학회지 Vol.34 No.7
The PTCR devices of BaTiO3 doped with Sb2O3, SiO2 were prepared by Liquid Addition Method(LPAM) where doping sources were used in the forms of Liquid. The amounts of doping in LPMA is smaller than that in solid state mixing method. Also the doping process in LPMA is very suitable for BaTiO3-based PTCR devices because it is easy to obtain homogeneous mixing and reproductivity. By optimizing the doping condition in BaTiO3 system, (0.09 mol% Sb2O3, 0.25 wt% SiO2 and 0.02 wt% MnO2) it was possible to fabricate BaTiO3-based PTCR devices whee the room-temperature resistivity and specific resistivity were 15{{{{ OMEGA }}cm and 2$\times$106 respectively.
두 대의 로봇의 근사 최소시간 제어를 위한 충돌회피 궤적 계획
이동수,정낙영,서일홍,최동훈,유준,Lee, Dong-Soo,Chong, Nak-Young,Suh, Il-Hong,Choi, Dong-Hoon,Lyou, Joon 대한기계학회 1991 대한기계학회논문집 Vol.15 No.5
본 연구에서는 동일 작업 공간내에서 두대의 로봇이 각각의 토크의 제한 조건 과 충돌 회피 조건을 만족하면서 근사 최소 시간에 지정된 경로를 주행하기 위한 궤적 계획법을 제안하고자 한다. 이때, 동작 우선도에 의하여 한 대의 로봇은 주 로봇, 다른 한 대의 로봇은 종 로봇으로 지정되는데 주 로봇은 입력 토크의 제한조건을 만족 하며 주어진 경로를 최소 시간에 움직이도록 궤적 계획을 하였으며, 종 로봇은 주 로 봇과의 충돌을 피하고 입력 토크의 제한 조건을 만족하며 주어진 경로를 근사 최소 시 간에 움직이도록 하였다.
이동수,김진수,이상한,장현중,최재갑,기우천,Lee, Dong-Soo,Kim, Chin-Soo,Lee, Sang-Han,Jang, Hyun-Jung,Choi, Jae-Kab,Ki, Woo-Cheon 대한악안면성형재건외과학회 1998 Maxillofacial Plastic Reconstructive Surgery Vol.20 No.3
Various local flaps and distant flaps including tongue flap, palatal island flap, and buccal flap as well as skin grafts have been used for the reconstruction of oral mucosal defect. In the posterior region of oral cavity and the buccal cheek area, buccal fat pad can be used as a pedicled graft. The buccal fat pad is different from other subcutaneous fat tissue and it is easily accessible. There are many advantages in pedicled buccal fat pad graft for the closure of oral mucosal defect. The procedure is easy, there is no visible scar in the donor site, it is capable of reconstruction of various contour, and it has good viability. We had used buccal fat pad as a pedicled graft for the closure of oral mucosal defect after the excision of tumor and the oroantral fistula. From the results of these cases, we concluded that the use of the buccal fat pad flaps was worth of the consideration for the reconstruction of oral mucosal defect in the regions of the buccal cheek, and posterior oral cavity.