RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        Top-Down 공법이 적용된 지중연속벽의 설계시 측방토압의 적합성 평가

        홍원표(Hong Won-Pyo),강철중(Kang Chul-Joong),윤중만(Yun Jung-Mann) 한국토목섬유학회 2012 한국지반신소재학회 논문집 Vol.11 No.1

        본 연구에서는 지중연속벽 설계시 사용되는 범용 해석프로그램에 Rankin(1857)의 이론토압과 홍원표와 윤중만(1995a)의 경험 토압을 각각 적용하여 Top-Down 공법에 적용된 지중연속벽의 수평변위를 분석하였다. 그리고 이들 해석 프로그램에서 산정된 예측변위량과 지중경사계로 측정된 실측변위량을 비교 검토하였다. 현재 지중연속벽 설계에 적용되는 해석프로그램에는 Rankine의 토압이 주로 적용되고 있다. 검토결과, 지중연속벽의 예측수평변위는 적용되는 토압에 따라 상당히 큰 차이를 나타내고 있다. Rankine의 토압을 적용하여 산정된 예측수평변위 형상은 실측결과와 큰 차이를 보이고 있으며 벽체의 하부에서 예측치가 실측치보다 과다하게 산정되었다. 반면, 홍원표·윤중만의 토압을 적용하여 얻은 예측수평변위 형상과 최대수평변위 량은 실측결과와 유사하게 나타났다. 따라서 Top-Down 공법이 적용된 지중연속벽의 설계시 Rankine의 토압보다는 홍원표·윤중만의 경험토압을 적용하는 것이 적합함을 알 수 있다. The Rankine(1857)'s earth pressure and the Hong and Yun(1995a)'s earth pressure was applied to analyze the lateral displacement of diaphragm wall applied to the Top-Down construction method using the computer program, which is a common design program for diaphragm wall. The lateral displacement estimated by the computer program was compared with the lateral displacement measured by inclinometer. The Rankine's earth pressure has been widely used to design the diaphragm wall in the analysis of computer program. As the result of comparison, the lateral displacement of diaphragm wall was predicted differently according to the applied earth pressures. The behavior of lateral displacement predicted by the Rankine's earth pressure was different with displacement measured by inclinometer and the lateral displacement at the bottom part was overestimated. However, the lateral displacement predicted by the Hong and Yun's earth pressure is similar to the behavior and maximum value of real displacement. Therefore, the Hong and Yun's earth pressure is more suitable than the Rankine' earth pressure to design the diaphragm walls applied to the Top-Down Construction Method.

      • KCI등재

        논문 : Top-Down 공법이 적용된 흙막이벽의 역해석을 이용한 거동분석

        홍원표 ( Won Pyo Hong ),강철중 ( Chul Joong Kang ),윤중만 ( Jung Mann Yun ) 대한지질공학회 2012 지질공학 Vol.22 No.1

        본 연구에서는 흙막이벽 설계시 널리 사용되고 있는 SUNEX 프로그램을 이용하여 Top-Down 공법이 적용된 지중연 속벽, 주열식 흙막이벽 (CIP벽, SCW벽)의 변형거동을 분석하였다. 해석프로그램에 Rankine의 토압(l857), Terzaghi and Peck의 토압(1967), Tschebotarioff의 토압(1973), 홍원표·윤중만의 토압(1995a)을 적용하여 흙막이벽의 수평변위를 예측하였다. 프로그램 해석결과, 흙막이벽의 수평변위량은 토압의 종류에 따라 큰 차이를 나타내고 있다. 홍원표·윤중만의 토압(I995a)을 적용하여 얻은 흙막이벽의 예측수평변위량이 실측수평변위량과 가장 유사하게 나타났다. 따라서 프로 그램 해석시 홍원표·윤중만의 경험토압(l995a)을 적용하면, Top-Down 공법이 적용된 흙막이벽의 변형거동을 비교적 정확히 예측할 수 있다. Abstract: The behaviors of a diaphragm wall and a contiguous pile wall such as CIP (Case-in-place pile) and SCW (Soil-cement wall), applied to the top-down construction method, were analyzed using the SUNEX program, which is widely used to design earth retaining walls. Four types of earth pressures, as described by Rankine (1857), Terzaghi and Peck (1967), Tchbotarioff (1973), and Hong and Yun (1995a), were applied to the analysis program to predict the lateral displacement of walls, The results show that the displacements of an earth retaining walls vary with the applied earth pressure. The predicted lateral displacement based on Hong & Yun`s (1995a) earth pressure is similar to the measured displacement. Therefore, the actual lateral displacement of an earth retaining wall, as applied to top-down construction method, can be accurately predicted by using an analysis program considering Hong and Yun`s (1995a) earth pressure.

      • KCI등재
      • KCI등재

        Design of a Modified Meander-Type Microstrip Patch Antenna for the 5.8㎓ Band

        윤중한(Joong-Han Yoon),이상목(Sang-Mok Lee) 한국통신학회 2009 韓國通信學會論文誌 Vol.34 No.8D

        본 논문은 5.8㎓ 대역에서 동작하는 수정된 미앤더형 마이크로스트립 안테나의 특성을 구현하였으며, 형식 모델은 미앤더형의 선폭과 보우 타이 형으로 설계하였다. 측정된 최대 대역폭은 약 0.505㎓(5.540-6.045㎓), 8.72%(VSWR 1:1.5)이다. 이득은 5.8㎓에서 약 7.71 dBi를 얻었으며, 통과대역에서의 원거리 필드 패턴은 매우 안정적 특성을 얻었다. This paper presents the characteristics of a modified meander-type patch antenna for the 5.8 ㎓ band, which is based on a meander line width and bow tie shaped model. The maximum measured bandwidth is approximately 0.505 ㎓ (5.54-6.045 ㎓) or about 8.72% (VSWR 1:1.5). The obtained measured gain is 7.71 dBi at 5.8 ㎓, and experimental far-field patterns are stable across the pass band.

      • KCI등재

        대한민국 건강 성인의 체질량지수 및 허리둘레 기준에 따른 복부 비만과 평가사구체여과율의 상관관계 - 2007년 국민 건강 영양조사 자료 중심으로 -

        윤중,김경곤,황인철,이경식,서희선 대한비만학회 2011 The Korean journal of obesity Vol.20 No.4

        연구배경: 2007년 국민 건강 영양조사자료를 통해서 대한민국 건강한 성인의 체질량지수 및 허리둘레 기준에따른 복부비만과 평가 사구체여과율(eGFR)의 관계를 분석하였다방법: 2007년 시행된 국민건강영양조사 대상자 중 건강면접조사와 건강검진조사에 모두 참여한 20세 이상 인구에서 만성 신장 질환, 암, 당뇨병, 고혈압, 고지혈증, 심근경색, 협심증, 뇌졸중 환자와 생리 및 임신 중인 여성을제외한 1,996명(남자 884, 여자 1,112)을 대상으로 분석하였다. 자기기입식 설문지로 건강관련 생활습관을 평가하고 혈압을 측정하고 혈당, 당화혈색소, 콜레스테롤을 측정하였다. eGFR은 the original Modification of Diet in Renal Disease study (MDRD) equation을 이용하여 구하였다. 결과: 체질량지수와 허리둘레는 다중공선성의 문제(R > 0.8)로 분리하여 eGFR과의 관계를 분석하였다. 다중회귀분석 결과, eGFR은 연령, 총 콜레스테롤, 고밀도 지질단백 콜레스테롤, 복부비만 또는 체질랑지수와 독립적인 연관성을 띠었다(P < 0.05). 그러나, 여자의 경우, 아시아-태평양 복부비만 기준(허리둘레 ≥ 80 cm15))으로 나누었을때, 복부비만(P = 0.148)은 eGFR과 의미 있는 연관성을 가지고 있지 않았으나 대한비만학회의 복부비만기준(허리둘레 ≥ 85 cm16))을 적용한 경우 복부비만(P = 0.031)이 독립적으로 eGFR과 의미 있는 연관성을 가지고 있었다. 결론: 체질량지수와 허리둘레에 따른 복부비만 모두 eGFR과 연관성을 가진다. 특히 여성의 허리둘레에 있어서아시아 태평양 복부비만 기준(허리둘레 ≥ 80 cm)은 연관성이 없고, 대한비만학회 복부비만기준(허리둘레 ≥ 85cm)경우에만 eGFR과 연관성이 있는 것을 확인하여 비만학회 복부비만기준을 재검증한 간접적인 계기가 되었다.

      • KCI등재

        마이크로스트립 선로를 이용한 삼중대역 WLAN 안테나의 설계 및 제작

        윤중한(Joong-Han Yoon) 한국전자통신학회 2019 한국전자통신학회 논문지 Vol.14 No.1

        본 논문에서는 마이크로스트립 선로를 이용하여 WLAN 시스템에 적용 가능한 삼중대역 안테나를 설계, 제작 및 측정하였다. 제안된 안테나는 두 개의 선로와 접지면에 슬릿을 갖도록 설계하여 삼중대역 특성을 갖도록 하였다. L3, L10, 그리고 슬릿 파라미터에 대한 조정을 위해 시뮬레이션을 수행하였으며 요구되는 주파수 대역과 대역폭을 만족하도록 제안된 모델의 각 파라미터 값들을 조정하였다. 제안된 안테나는 32.0 mm⨯44.0 mm× 1.0mm의 크기로 유전율 4.4인 FR-4 기판 위에 설계 및 제작되었다. 제작 및 측정결과로부터, 120 MHz (890 MHz∼1.01 MHz), 440 MHz (2.35∼2.79 GHz), 그리고 1,280 MHz (5.07∼6.35 GHz)의 대역폭을 얻었다. 또한 요구되는 주파수 대역에서 측정된 이득과 방사패턴 특성을 나타내었다. In this paper, a microstrip-fed triple-band antenna for WLAN system with microstrip lines was designed, fabricated and measured. The proposed antenna is composed of two strip lines and slit in the ground plane and then designed in order to get triple band characteristics. We carried out simulation on L3, L10, and slit parameters, and adjusted the parameters of the proposed antenna to satisfy the required frequency band and bandwidth. The proposed antenna is made of 32.0 × 44.0 × 1.0 mm and is fabricated on the permittivity 4.4 FR-4 substrate. The experiment results shows that the proposed antenna obtained the -10 dB impedance bandwidth 120 MHz (890 MHz∼1.01 MHz), 440 MHz (2.35∼2.79 GHz), and 1,280 MHz (5.07∼6.35 GHz) covering the triple WLAN bands. Also, the measured gain and radiation patterns characteristics of the proposed antenna are presented at required frequency band, respectively.

      • KCI등재후보

        광대역 특성을 갖는 이중 원형 링 모노폴 안테나의 설계와 제작

        윤중,이영철,Yoon, Joong-Han,Rhee, Young-Chul 한국전자통신학회 2013 한국전자통신학회 논문지 Vol.8 No.9

        본 논문에서는 광대역 특성을 갖는 이중 원형 링 모노폴 안테나를 설계 및 제작 하였다. 제안된 안테나는 평면형 모노폴 형태를 기본으로 이중 원형 링과 접지면으로 구성되어 있으며 광대역 특성을 갖도록 설계하였다. 최적화된 파라메타을 얻기 위해 상용 툴(HFSS)을 사용하여 시뮬레이션 하였으며 안테나 성능에 민감하게 적용받는 파라메타를 찾아내서 최적화된 수치를 얻었다. 얻어진 최적화된 수치를 사용하여 제안된 안테나를 제작하였다. 제작된 안테나는 광대역 특성을 갖는 대역에서 반사손실, 이득, 방사패턴의 특성을 측정하였다. 측정결과, -10dB을 기준으로 4,530 MHz(2,510-7,040 MHz)의 광대역 특성을 얻었으며 주어진 이득은 최대이득 0.71~3.38 dBi 그리고 평균이득 -3.85~0.3 dBi을 얻었다. 측정된 방사패턴의 경우, 전체적으로 E면은 전방향성의 방사패턴을 갖고 있으면 H면은 다이폴 안테나의 전형적인 특성을 나타내고 있다 In this paper, a double circular ring monopole antenna for wideband applications is designed and fabricated. The proposed antenna is based on a planar monopole design, and composed of double circular ring of radiating patches and ground plane to obtain the wideband characteristics. To get the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that effect antenna characteristics. Using the obtained parameters, the proposed antenna is fabricated. The fabricated antenna is measured at the operating frequencies, and the return loss coefficient, gain, and radiation patterns are determined. The results of measurement, -10dB impedance bandwidth, measured return loss is 4,530 MHz(2,510-7,040 MHz) and antenna peak and average gains for the frequencies are obtained 0.71~3.38 dBi, -3.85~0.3 dBi, respectively. In case of radiation patterns, the proposed antenna displays nearly omnidirectional radiation characteristics in the E-plane, and monopole-like radiation pattern characteristics in the H-plane.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼