http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
곽노석,심종배,황택성 한국고분자학회 2013 Macromolecular Research Vol.21 No.9
Dimethyl 5-sulfoisophthalate sodium salt (DMSIP)-co-diethylene glycol (DEG)-co-maleic anhydride (MA)/phthalic anhydride (PA) oligomers were synthesized via condensation reaction and the corresponding membranes were prepared by UV curing. The number-average molecular weight (Mn) of the DMSIP-co-DEG-co-MA/PA (DDMP) was proportional to the concentration of DMSIP and ranged from 1,360-2,856 g/mol. A successful introduction of a -SO3Na group to the main oligomer chain was confirmed using Fourier transform infrared (FTIR)and nuclear magnetic resonance (NMR) spectroscopy and the thermal stability of the membranes up to 300 oC was analyzed using thermogravimetric analysis (TGA). The water uptake values, swelling ratios, and the ion-exchange capacities of the membranes were 13%-30%, 7%-15%, and 0.7-0.9 meq/g, respectively. The electrical properties of the membrane,including the area resistance, ion transport number, and the cyclic charge-discharge current were also analyzed; these properties confirmed that these membranes were suitable for use in redox flow battery (RFB) applications.
2P-533 Development of block polyisocyanates, which are unblocked at low temperature
김경진,고한숙,송준원,심종배,최광식 한국공업화학회 2017 한국공업화학회 연구논문 초록집 Vol.2017 No.1
일반적으로 우레탄 도료는 미리 주제와 경화제를 혼합하여 사용하는 1핵형 도료, 주제와 경화제를 미리 혼합하지 않고 사용 직전에 혼합하여 사용하는 2핵형 도료로 나누어진다. 본 연구에서는 1핵형 도료에 사용되는 블록 경화제 (Blocked Polyisocyanate)의 해리온도를 낮추는 내용을 담고 있다. 보통 블록 경화제를 사용하는 1핵형 경화제의 단점은 높은 해리온도로 인해 열에 약한 기재에 사용하기 힘들다는 것과 높은 해리온도로 인한 과도한 에너지 사용으로 얘기할 수 있다. 반대로 해리온도가 낮아지면 도막의 건조성이 떨어지거나 도막 경도가 약해지는 단점이 발생하는 것이 일반적이다. 따라서 우선적으로 해리온도를 낮추면서 도막 건조성 및 경도가 떨어지지 않는 블록 경화제를 개발하는 것을 토의하고자 한다.
1P-585 공정보호용 열-UV 이중경화형 아크릴 점착제
김현주,조원섭,여문진,김정렬,최환정,심종배,최광식 한국공업화학회 2017 한국공업화학회 연구논문 초록집 Vol.2017 No.1
공정보호용 점착 필름은 물질을 공정과정간 스크래치 오염 방지를 위해 부착시킨다. 이러한 공정 보호용 점착 필름은 높은 응집력과 웨팅성이 기본적으로 요구되며 피착면, 공정에 따라 고 점착, 연신율, 내열성 등이 추가적으로 요구되고 있다. 본 연구는 공정 보호용 점착제 중 공정과정간 높은 점착력과 웨팅성이 구현되며 공정 후엔 UV조사 처리 하여 낮은 점착력이 구현되는 열-UV 이중경화 방식을 채택한 점착제의 연구이다.