모바일 S/W 시스템 엔지니어 직무분석에 관한 연구

박종성,한상근,이창래 한국진로교육학회 2007 진로교육연구 Vol.20 No.1

This paper is aimed to design for Vocational Education and Training Program of Mobile Software and System Engineer. Job analysis was performed by the experts of education and related field though Developing A Curriculum(DACUM). A Vocational Education and Training Program of Mobile Software and System Engineer was designed and policy suggestions are made for the substantiality and activity to the government. This study is performed expert interview and job analysis.The results are presented the summaries of job definitions, job models, areas of vocation activities, curriculum for education and training. The above suggested results of job analysis on a basis of Developing A Curriculum will become critical basic resources for reforms in setting standards on making questions for the tests of universities and collages. 기획상품기획휴대폰상품기획자새로운 휴대폰 상품의 개념을 잡고 개발일정을 계획하고 프로젝트를 관리하며 새로운 제품에 들어갈 부품이나 융합해야 하는 기술을 구매 혹은 외주 계약함기술기획모바일아키텍처모바일산업의 소프트웨어 기획을 담당하며 기술동향을 분석하여 향후 기술개발 연구일정과 방향을 제시모바일기술컨설턴트모바일산업의 하드웨어 기획을 담당하며 기술동향을 분석하여 기술 발전 및 융합의 방향을 제시하고 연구관련 로드맵 제시개발디자인휴대폰디자이너디자인 트렌드나 기술동향을 분석하여 신제품의 디자인을 개발하고 이에 따른 컬러나 재료를 결정하며 제품의 양산을 감리함HW휴대폰기구설계엔지니어상품의 기획에 따라 휴대폰의 하우징을 설계하면서 제품의 기구를 개발휴대폰RF개발자제품의 스펙에 맞는 안테나를 개발하고 회로 설계시 위치를 결정하며 안테나의 방향 및 성능, 형태를 결정모바일HW엔지니어제품의 회로를 설계하고 양산가능성이나 신뢰성을 테스트하며 다양한 기능을 부가시키는 회로설계기술을 개발SW모바일SW시스템엔지니어제품의 하드웨어 설계가 구현되도록 소프트웨어 명령체계를 짜며 프로그램의 오류를 수정하고 플랫폼을 개발/적용모바일콘텐츠개발자휴대폰의 모바일 게임이나 음악 서비스, 소액결제 시스템 등의 어플리케이션이 가능하도록 프로그램을 짜거나 개발휴대폰테스터하드웨어 설계에 맞게 소프트웨어의 프로그램이 구현되었는지 양산 전에 테스트함 생산기술지원구매자재관리자양산성 검증을 받은 신제품에 들어갈 자재를 구매하고 생산계획을 세우며 이에 따른 부품을 수량을 조절하고 잔여수량 확인생산관리생산공정관리자개발단계에서 만들어진 휴대폰의 생산제조규격서를 작성하여 조립 및 생산을 용이하게 지원부품실장설비기사부품실장 시 필요한 장비를 유지보수하며 제품에 따라 장비를 프로그래밍 함조립수리사조립과정에서 발생하는 불량을 파악하고 원인을 찾아 수리휴대폰 조립원규격서에 따라 맡은 휴대폰의 부품을 조립하고 각 단계별 테스트를 시행관리사후관리휴대폰AS 엔지니어제품의 판매 후 고장 및 불편해소를 위해 AS를 담당하는 엔지니어품질관리휴대폰품질검사원회사의 품질표준을 근거로 제품의 결함여부를 검사하고 불량률을 줄이기 위한 방안을 강구자료: 한상근, 박준식, 서창교, 장홍근, 이종선, 김기헌, 박종성, 정윤경, 최동선(2005), 직업연구(Ⅰ), 한국직업능력개발원. 휴대폰 산업에 대한 직업 중 소프트웨어 개발에서 가정 중요한 모바일 소프트웨어 시스템엔지니어 직업을 선정하여 직업교육훈련프로그램 개발을 위한 직무분석을 실시해야 한다는 전문가들의 지적이 제기되고 있다(이용순 외, 2002).따라서 이 연구에서는 전문가 의견을 통하여 직무분석 필요성이 가장 요구되는 모바일 소프트웨어 시스템 엔지니어 직업에 대한 직무분석을 실시하고자 한다. 모바일 소프트웨어 엔지니어에 대한 직무분석을 통하여 모바일 소프트웨어엔지니어의 직무의 정의. 직무의 모형, 직업명세서, 직무명세서, 작업명세서, 작업/지식기능도구 및 코스 행렬표, 교육훈련과정 및 출제기준을 제시하고자 한다. 모바일 소프트웨어엔지니어의 직무분석 결과는 산업현장에서 요구하는 직무내용을 바탕으로 이루어지기 때문에 모바일 소프트웨어엔지니어에 대한 교육훈련프로그램을 대학 등에 제 ...

관리종목 지정을 회피하기 위한 코스닥 기업의 이익조정

박종성 한국경영컨설팅학회 2012 경영컨설팅연구 Vol.12 No.3

초정밀 위치 제어를 위한 PZT 모델링

박종성,정규원 한국공작기계학회 2006 한국공작기계학회 추계학술대회논문집 Vol.2006 No.-

The ultra-precision positioning system is demanded for some industrial fields, such as semiconductor lithography and fabrication of the nano structure. In this paper, the ultra-precision stage which consists of flexure hinges, piezoelectric actuator, and ultra-precision linear encoder, is designed and developed. From the step responses of the system, the system transfer function of the ultra-precision stage system was derived using system identification tool and reduced second order model system. In order to have robustness for the system uncertainty and external disturbances, the weighting functions were selected and the H_(∞) controller was designed using them. For the designed controller, the simulation was performed and the designed stage system was applied.

Fresh bakery, Fresh everyday 뚜레쥬르

박종성 (사)한국인터넷전문가협회 2005 Web Korea Annual Vol.2005 No.-

Mobile Video Telephony Service Adoption:A Value-based Approach

박종성,이정훈,우혁준 한국데이터전략학회 2010 Journal of information technology applications & m Vol.17 No.2

Korean telecommunications industry has a large scale market and boasts on high service quality and high technologies enough to provide the mobile video telephony service(the VTS) satisfactorily. For many years, Korean telecommunications companies have been investing enormous amount of money to advertise their VTS widely and to allow their customers to change their cell phones for the 3G(the third generation) devices indispensable for the VTS. However, despite their efforts, the VTS adoption rate in Korea is very low as of January, 2010 and it seems that customers seldom feel the necessity to use. From this viewpoint, it becomes necessary to identify antecedents influencing the intention to use for the VTS empirically. For this purpose, we have proposed several hypotheses from the perspective of the Value-based Adoption Model(VAM). We conducted a survey and found the several factors which influence the value perception of VTS.

Fe-Al-Mn 합금의 저온기계적 성질과 용접에 따른 기계적 성질

박종성,맹선재 대한금속재료학회(대한금속학회) 1987 대한금속·재료학회지 Vol.25 No.5

In this work Fe-Al-Mn alloys of different phase structure of γ-single phase and mixed phase of α+ γhave been studied. By decreasing the test temperature, elongation was increased in most of the tested samples. However, elongation of the alloys containing more than 25% α-phase decreased at -196℃. Increase of elongation at low temperature may be interpreted with TRIP phenomena. The samples of y-single phase and she mixed structure of γ-5% αphase have shown very low decrease of impact energy with decreasing test temperature. Their low temperature impact toughness are superior to the conventional 304 stainless steel. The impact energy of the samples containing more than 25% α-phase decreased quite a large amount with decreasing test temperature. Weldability of all the alloys was not so good by arc welding. By decreasing the test temperature the strength of the welded materials increased and elongation has decreased.

줄넘기 운동이 사무직 근로자의 신체조성, 근피로도 및 건강관련 체력에 미치는 영향

박종성,이경구,이호성 한국사회체육학회 2019 한국사회체육학회지 Vol.0 No.75

Purpose: The purpose of this study is to determine the effects of jump rope exercise on body composition, muscle fatigue and physical fitness in white-collar workers. Method: Twenty white-collar workers (n=20) were randomly assigned to jump rope exercise group (JEG, n = 10) and control group (CON, n = 10). Jump rope exercise was performed for 48 minutes, 3 times a week, and for 6 weeks. The body composition (weight, muscle mass, body fat and BMI), muscle fatigue (tibialis anterior muscle, rectus abdominis muscle, erector spinae muscle and gastrocnemius muscle) and Physical fitness (one leg standing with closed eyes, sit-up, sit-reach, plank, grip strength and harvard step) were measured before and after 6-week jump rope exercise. Results: Muscle fatigue of erector spinae muscle had statistically significant interactions between T (p=.013) and G×T (p=.011) respectively. In physical fitness, sit-up significantly increased at JEG (p=.038) after jump rope exercise than that before. Plank and Harvard step showed statistically significant interactions in G×T (p=.049, p=.011) respectively. Conclusion: These results suggest that jump rope exercise improve muscle fatigue and physical fitness in white-collar workers.

민간자격 운영 현황 및 개선 방안 연구

박종성,김상진,김상호 한국성인교육학회 2006 Andragogy Today : International Journal of Adult & Vol.9 No.3

『헤겔』 프레더릭 바이저 지음, 이신철 옮김, 도서출판b, 2012

박종성 명지대학교(서울캠퍼스) 인문과학연구소 2017 인문과학연구논총 Vol.38 No.4

.

분사주조한 SiCp 입자강화 알루미늄 복합재료의 미세조직과 마멸특성

박종성,김명호 ( Chong Sung Park,Myung Ho Kim ) 한국주조공학회 1995 한국주조공학회지 Vol.15 No.6

N/A The SiC_p-reinforced preforms fabricated by spray casting process were hot-extruded and subsequently T6-treated, and the morphology of the silicon phase and the grain size for these preforms and extruded samples were examined by Image Analyzer. Experimental observation revealed that with increase in volume percent of SiC particles, the grain size and silicon phase of the Al-Si/SiC_p composites become finer, the shape of Si phase is changed from blocky to granular type, and aspect ratio of Si phase tend to become unity. Wear-tests with various sliding velocities, show that the wear resistance of spray cast specimen is increased remarkably compare to the permanent mold cast specimen at the sliding velocity range of 1.98∼2.38m/sec.. Microstructural observations for the worn surfaces of specimens revealed that wear resistance of Al-Si alloys at certain sliding velocities could be improved not only by the fine grain size of aluminum matrix but also the fine size and granular shape of silicon phases. The wear resistance of SiC_p reinforced aluminum composites was found to be sensitive to the volume percentage of the reinforcing particles. The worn surfaces with various sliding velocities, show that change in wear mechanism seems to occur at the sliding velocity of near 2m/sec for all samples, and such a change in mechanism is delayed with increase in SiC_p volume fraction.