http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김희동,김태호,김동형,Kim, Heuy-Dong,Kim, Tae-Ho,Kim, Dong-Hyeon 대한기계학회 1999 大韓機械學會論文集B Vol.23 No.1
The entry compression wave, which forms at the entrance of a high-speed railway tunnel, is closely related to the pressure transients in the train/tunnel systems as well as an impulsive noise appearing at the exit of the tunnel. In order to alleviate such undesirable phenomena, some control strategies have been applied to the compression wave propagating inside the tunnel. The objective of the current work is to investigate the effect of tunnel entrance hoods on the entry compression wave at the vicinity of the tunnel entrance. Three types of entrance hoods were tested by the numerical method using the characteristics of method for a wide range of train speeds. The results show that the maximum pressure gradient of compression wave can be considerably reduced by the tunnel entrance hood. Optimum hood shape necessary to reduce the pressure transients and impulsive noise was found to be of an abrupt type hood with its cross-sectional area 2.5 times the tunnel area. It is believed that the current results are highly useful in predicting the effects of entrance hoods and in choosing the shape of proper hood.
김희동,김윤호,김석현,Kim, Hee-Dong,Kim, Yoon-Ho,Kim, Seock-Hyun 한국음향학회 2007 韓國音響學會誌 Vol.26 No.1
음향 공동-유리창 연성계를 대상으로 도청음의 음성 명료도를 검토한다. MLS신호를 음원으로 유리창의 가속도와 속도 응답을 가속도계와 레이저 도플러 진동계를 사용하여 측정한다. 변조전송함수 (MTF)를 사용하여 공동-유리창 진동계의 음성전달특성을 규명한다. 변조전송함수에 근거하여 음성전송지수 (STI)를 구하고, 유리창 진동음의 음성명료도를 평가한다. 가속도음과 속도음의 음성명료도를 비교하고, 최종적으로 대화음의 명료도를 주관적 평가로 확인한다. Speech intelligibility of the eavesdropping sound is investigated on a acoustic cavity - glass window coupled system. Using MLS (Maximum Length Sequency) signal as a sound source, acceleration and velocity responses of the glass window are measured by accelerometer and laser doppler vibrometer. MTF (Modulation Transfer Function) is used to identify tile speech transmission characteristics of the cavity and window system. STI (Speech Transmission Index) based upon MTF is calculated and speech intelligibility of the vibration sound of the glass window is estimated. Speech intelligibilities by the acceleration signal and the velocity signal are compared. Finally, intelligibility of the conversation sound is confirmed by the subjective test.
고속철도 터널입구에서 형성되는 압축파의 특성에 관한 연구
김희동,김태호,이종수,김동현,Kim, Heuy-Dong,Kim, Tae-Ho,Lee, Jong-Su,Kim, Dong-Hyeon 대한기계학회 1999 大韓機械學會論文集B Vol.23 No.2
Flow phenomena such as the pressure transients Inside a high-speed railway tunnel and the Impulsive waves at the exit of the tunnel are closely associated with the characteristics of the entry compression wave, which is generated by a train entering the tunnel. Tunnel entrance hood may be an effective means for alleviating the Impulsive waves and pressure transients. The objective of the current work is to explore the effects of the train nose shape and the entrance hood on the characteristics of the entry compression wave. Numerical calculations using the method of characteristics were applied to one-dimensional, unsteady, compressible flow field with respect to high-speed railway/tunnel systems. Two types of the entrance hoods and various train nose shapes were employed to reveal their influences on the entry compression wave for a wide range of train speeds. The results showed that the entry compression wave length increases as the train nose becomes longer and the train speed becomes lower. The entry compression wave length in the tunnel with hood becomes longer than that of no hood. Maximum pressure gradient in the compression wavefront reduces by the entrance hood. The results of the current work provide useful data for the design of tunnel entrance hood.
400MPa급 건축구조용 열간압연 H형강(SHN400)의 소재 특성
김희동,최병정,김상섭,김철환,오영석,Kim, Hee-Dong,Choi, Byoung-Jeong,Kim, Sang-Sub,Kim, Chul-Hwan,Oh, Young-Suk 한국강구조학회 2011 韓國鋼構造學會 論文集 Vol.23 No.4
본 연구의 목적은 시험적 방법을 통해 SHN400 강재의 소재 특성이 건축구조용 강재로 적합한지를 평가하는 것이다. 이를 위해 국내에서 생산되는 열간 압연 H형강 중 최대 춤 및 최대 플랜지 두께의 H형강과 SHN400 강종의 주요 사용처가 될 보부재로 수요가 많은 H형강 규격을 대상으로 화학성분 평가, 인장강도, 매크로, 미크로 및 샤르피 충격 시험을 실시하였다. 각 시험은 관련 KS 규격에서 요구하는 시험 조건하에서 수행되었으며, 시험 결과 화학성분 및 기계적 특성과 관련된 모든 시험에서 SHN400 강종은 KS 규격(KS D 3866)의 요구 조건과 내진설계시 강재에 요구되는 조건들을 만족하는 것으로 나타났다. 특히 용접성과 관련된 탄소당량(Ceq)과 비탄성 변형능력과 관련된 항복비의 경우 KS 규격을 상회하는 결과를 나타내었다. 따라서 SHN400 강재는 소재 특성 측면에서 건축구조용 강재에 적합한 것으로 판단된다. The purpose of this study was to evaluate the material characteristics of SHN400 steel, which is suitable as a steel material for building structures, using the experimental approach. For this purpose, the chemical composition test, tensile test, macro test, micro test, and charpy notch impact test were conducted with specimens taken from the highest, thickest, and commonly used H-beams for girder or beam members. Each test was conducted under the Korean Standard(KS) test conditions. All the test results satisfied the requirements of KS (KS D 3866) and the steel material for seismic design. The carbon equivalent value (Ceq), which is related to weldability, and the yield ratio, which is related to inelastic behavior, showed especially good results. Thus, SHN400 is definitely suitable as the steel material for building structures.
고속철도 터널출구에서 발생하는 충격성 소음의 저감을 위한 실험적 연구
김희동,뢰호구준명,Kim, Hui-Dong,Setoguchi, Toshiaki 대한기계학회 1996 大韓機械學會論文集B Vol.20 No.7
As a compression wave is emitted from a duct, an impulsive wave generates and causes an impulsive noise that is at present a serious environmental noise pollution. In order to clarify the acoustic characteristics of the noise and to reduce their pressure levels, a series of model experiments were conducted on the impulsive waves emitted from an open end of a shock tube. The impulsive waves with various intensities were obtained by controlling the operation pressure ratio of the shock tube. Various kinds of silencers such as the exit boxes with baffle plates, were applied to the duct exit to reduce the impulsive noises. The effects of geometry of silencers and shock Mach number on the noise reduction were clarified. From the measurements of sound pressure level, it was found that installing the baffle plate into the exit box is effective in lowering the noise level at far fields, and that the recommendable geometries of silencer are L/D=1, H/D=1 and H/D=0.75.
초음속 노즐을 통하는 부족팽창 제트에 관한 수치계산적 연구 (2)
김희동,신형승,Kim, Hui-Dong,Sin, Hyeong-Seung 대한기계학회 1996 大韓機械學會論文集B Vol.20 No.6
Numerical calculation was applied to supersonic under-expanded jets, and compared with the results of a linear theory and other experiments. TVD difference scheme was employed to solve 2-dimensional and axisymmetric inviscid Euler equation. This paper aims to explore the effects of angle of divergence and design Mach number of nozzle on the structure of under-expanded jets. The angle of divergence was varied from 0 to 20 deg. The results show that the length of the first cell of the under-expanded jets decreases and Mach disk generates at lower nozzle pressure ratio, if the angle of divergence or design Mach number of nozzle increases. The distance from the nozzle exit to Mach disk in 2-dimensional jets becomes much larger than that of axisymmetric jets, and the widths of the jet boundary and the barrel shock wave are also larger than that of axisymmetric jets. Calculation results indicate that the configuration of the under-expanded jets is strongly dependent on the nozzle pressure ratio.