표면 도핑 기법을 사용한 SOI RESURF LDMOSFET의 항복전압 및 온-저항 특성 분석

김형우,김상철,방욱,강인호,김기현,김남균,Kim Hyoung-Woo,Kim Sang-Cheol,Bahng Wook,Kang In-Ho,Kim Kl-Hyun,Kim Nam-Kyun 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.1

In this paper, breakdown voltage and on-resistance characteristics of the surface doped SOI RESURF LDMOSFET were investigated as a function of surface doping depth. In order to verify the variation of characteristics, two-dimensional device simulation was carried out. Breakdown voltage of the proposed structure is varied from $73 {\~}138V$ while surface doping depth varied from $0.5{\~}2.0{\mu}m$. And on-resistance is decreased from $0.18{\~}0.143{\Omega}/cm^2$ while surface doping depth increased from $0.5 {\~}2.0{\mu}m$. Maximum breakdown voltage of the proposed structure is 138 V at $1.5{\mu}m$ depth of surface doping, yielding $22.1\%$ of improvement of breakdown voltage in comparison with that of the conventional SOI RESURF LDMOSFET with same epi-layer concentration. On-resistance characteristic is also improved about $21.7\%$.

에피층 농도 변화에 따른 Multi-RESURF SOI LDMOSFET의 전기적 특성 분석

김형우,서길수,방욱,김기현,김남균,Kim, Hyoung-Woo,Seo, Kil-Soo,Bahng, Wook,Kim, Ki-Hyun,Kim, Nam-Kyun 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.9

In this paper, we analyzed the breakdown voltage and on-resistance of the multi-RESURF SOI LDMOSFET as a function of epi-layer concentration. P-/n-epi layer thickness and doping concentration of the proposed structure are varied from $2{\sim}5{\mu}m\;and\;1\{times}10^{15}/cm^{3}^{\sim}9\{times}10^{15}/cm^{3}$ to find optimum breakdown voltage and on-resistance of the proposed structure. The maximum breakdown voltage of the proposed structure is $224\;V\;at\;R_{on}=0.2{\Omega}-mon^{2}\;with\;P_{epi}=3\{times}10^{15}/cm^{3},\;N_{epi}=7\{times}10^{15}/cm^{3}\;and\;L_{epi}=10{\mu}m$. Characteristics of the device are verified by two-dimensional process simulator ATHENA and device simulator ATLAS.

총의치 환자의 만족도에 대한 연구

김형우,김정희,김영수,Kim, Hyung-Woo,Kim, Chang-Whe,Kim, Yung-Soo 대한치과보철학회 1995 대한치과보철학회지 Vol.33 No.3

A success of complete denture prosthesis can be determined by the satisfaction degree of the dentist and the patient. There are many factors influencing on the satisfaction of the complete denture patients. The purpose of this study is to analyze the correlation between the masticatory satisfaction and clinical evaluation, and the speech satisfaction and clinical evaluation in complete denture patients. 79 patients(total 119 complete dentures) were examined in this study who were treated in Seoul National University Dental Hospital. Through clinical evaluation, 2 examiners evaluated sex, age, edentulous period, the years of having used present complete denture, the number of the previous dentures, the state of the opposite arch, retention, stability, support, occlusion, vertical dimension of the complete denture and the condition of the residual alveolar ridge. Through questionnaires concerned with mastication and speech, examiners evaluate the satisfaction degree of the patients. This study led to the conclusion that : 1. The satisfaction degree of the mastication was lower in older patients(p<0.001) and in patients whose present complete denture period was shorter(p<0.05). The satisfaction degree of the mastication in male was higher than in female patients(p<0.01). 2. The satisfaction degree of the mastication was high when the retention of the complete denture was good(p<0.05), and when the condition of the residual alveolar ridge was good(p<0.05). 3. The satisfacion degree of the speech was high when the retention of the complete denture was good(p<0.01). 4. The satisfaction degree of the mastication was higher in patients with upper and lower complete denture than in patients with single complete denture whose oppsite arch was unilateral partial denture(p<0.05).

박막증착시 티타늄 표면의 마손저항도와 세포독성에 관한 연구

김형우,김창회,김영수,Kim Hyung-Woo,Kim Chang-Whe,Kim Yung-Soo 대한치과보철학회 2001 대한치과보철학회지 Vol.39 No.1

Titanium is widely used in dentistry for its low density, high strength, fatigue resistance, corrosion resistance, and biocompatibility. But it has a tendency of surface damage under circumstance of friction and impact for its low hardness of the surface. Coating is one of methods fir increasing surface hardness. Its effect is to improve surface physical characteristics without change of titanium. Diamond-like carbon and titanium nitride are known for its high hardness of the surface. So that this study was aimed at the wear test and the cytotoxicity test of the commercially pure titanium and Ti-6Al-4V alloy which were deposited by diamond-like carbon film or titanium nitride film to acertain improvement of the surface hardness and the biocompatibility. A disk (25mm diameter, 2mm thickness) was made of commercially pure titanium and Ti-6Al-4V alloy and these substrates were deposited by diamond-like carbon film or titanium nitride film. Diamond-like carbon film was deposited by the method of radiofrequency plasma assisted chemical vapor deposition and titanium nitride film was deposited by the method of reactive arc ion plating. Then these substrates were tested about wear characteristics by the pin-on-disk type wear tester in which ruby ball was used as a wear causer under the load of 32N, The fracture cycles were measured by rotating the substrates until their films were fractured. The wear volume was measured after 150 cycles and 3,000 cycles using surface profiler. The cytotoxicity test was peformed by the method of the MTT assay. The results were as follows : 1. In the results of the wear volume test, commercially pure titanium and titanium alloy which were coated by diamond-like carbon film or titanium nitride aim had higher resistance against wear than the substrates which were not coated by any films (P<0.05). 2. In the results of the fracture cycle test and the wear volume test, diamond-like carbon film had higher resistance against wear than titanium nitride film (P<0.05). 3. In both coatings of diamond-like carbon aim and titanium nitride film, Ti-6Al-4V alloy had higher resistance against wear than commercially pure titanium (P<0.05) 4. In the results of the cytotoxicity test, diamond-like carbon film and titanium nitride film had little cytotoxicity as like commercially pure titanium or Ti-6Al-4V alloy (P>0.05).

하악지에서의 하치조신경관 주행에 대한 Conebeam CT를 이용한 연구

김형우,권경환,민승기,오승환,지영덕,고세욱,이재환,온병훈,Kim, Hyong-Woo,Kwon, Kyung-Hwan,Min, Seung-Ki,Oh, Seung-Hwan,Chee, Young-Deok,Koh, Se-Wook,Lee, Jae-Hwan,Ohn, Byung-Hun 대한악안면성형재건외과학회 2009 Maxillofacial Plastic Reconstructive Surgery Vol.31 No.5

Objectives: This study was performed to evaluate course of the inferior alveolar canal in the mandibular ramus and to find safety zone when ramal bone is harvested. Patients and Methods: From January, 2009 to February, 2009, the 20 patients who visited in the Department of Oral and Maxillofacial Surgery, Sanbon Dental Hospital. Wonkwang University and the Conebeam CT was taken of various chief complaints, were selected. The patients who had left and right mandibular first molar and incisor missing, jaw fracture and bone pathology were excluded. The R point was defined as the point which occlusal plane was crossed to the mandibular anterior ramus(external oblique ridge). In the cross-sectional coronal and axial views, the inferior alveolar canal position to the R point, buccal bone width(BW), alveolar crest distance(ACD), distance from alveolar crest to occlusal plane(COD) and inferior alveolar canal to sagittal plane(CS) were measured and horizontal distance(HD), vertical distance(VD) and nearest distance(ND) were measured. Results: The inferior alveolar canal is located $6.19{\pm}1.21\;mm$ from the R point. Horizontal distance from the R point were $13.07{\pm}2.45\;mm$, vertical distance from the R point were $14.24{\pm}2.41\;mm$ and nearest distance from the R point were $10.12{\pm}1.76\;mm$. The course of the inferior alveolar canal was positioned within $0.61{\pm}0.68\;mm$. The distance from external buccal bone to the inferior alveolar canal was increased from the R point anteriorly. Conclusions: It is considered that the mandibular ramus from the R point to 10 mm anteriorly can be harvested safely at ramal bone grafting.

소청룡탕이 천식이 유발된 생쥐의 면역세포에 미치는 영향

김형우,Kim, Hyung-Woo 대한예방한의학회 2006 대한예방한의학회지 Vol.10 No.2

BACKGROUND : Socheongryong-Tang(小靑龍湯, SCRT), a herbal medicine, has been widely used for the control of respiratory disease in Eastern countries. Recent years SCRT was known as anti-allergic agent. However, its therapeutic mechanisms, especially an inhibitory effect on inflammatory cell infiltration and airway remodeling in allergic asthma are unclear. METHODS : We investigated the effects of SCRT on levels of IL-4, and IFN-g using flow cytometric analysis and infiltration of inflammatory cells in bronchoalveolar lavage fluid(BALF) using cytospin methods in allergen-induced asthma. RESULTS : SCRT decreased levels of IL-4, a Th2-driven cytokine. But INF-g, a Th1-driven cytokine, was not changed. With SCRT treatment, infiltration of inflammatory cells showed reduced tendency. CONCLUSION : In conclusion, we demonstrated that regulation of Th1/Th2 imbalance may be one of mechanism contributed to reduction of inflammatory cell infiltration.

도시하천방재를 위한 지능형 모니터링에 관한 연구

김형우,이범교,Kim. Hyung-Woo,Lee. Bum-Gyo 한국방재학회 2008 한국방재학회 학술발표대회논문집 Vol.2008 No.1

Up to now, a lot of houses, roads and other urban facilities have been damaged by natural disasters such as flash floods and landslides. It is reported that the size and frequency of disasters are growing greatly due to global warming. In order to mitigate such disaster, flood forecasting and alerting systems have been developed for the Han river, Geum river, Nak-dong river and Young-san river. These systems, however, do not help small municipal departments cope with the threat of flood. In this study, a real-time urban flood forecasting service (U-FFS) is developed for ubiquitous computing city which includes small river basins. A test bed is deployed at Tan-cheon in Gyeonggido to verify U-FFS. It is found that U-FFS can forecast the water level of outlet of river basin and provide real-time data through internet during heavy rain. Furthermore, it is expected that U-FFS presented in this study can be applied to ubiquitous computing city (u-City) and/or other cities which have suffered from flood damage for a long time.

오피스 랜드스케이핑(완)

김형우,Kim, Hyeong-U 대한건축사협회 1980 建築士 Vol.1980 No.12

해저연약지반 시험집광기의 동적거동 해석

김형우,홍섭,최종수,여태경,Kim, Hyung-Woo,Hong, Sup,Choi, Jong-Su,Yeu, Tae-Yeong 한국해양학회 2008 바다 Vol.13 No.3

본 논문은 해저 연약지반 위를 주행하는 시험집광기의 동적거동 해석을 다루고 있다. 시험집광기는 단괴채집장치, 무한궤도, 단괴파쇄기, 샤시프레임, 전기 전자 시스템으로 구성되어 있다. 시험집광기의 공기 중 무게는 8,600 kg이며, 수중에서의 시험집광기의 평균접지압은 6.0 kPa이다. 상용해석 프로그램인 RecurDyn-LM과 Visual Fortran 90을 이용하여 시험집광기의 동적거동 해석 모델 및 유체저항력 모델을 구축하였다. 상용해석 프로그램(RecurDyn-LM)에서 제공되는 사용자 정의 서브루틴을 이용하여 연약지반역학 모델 및 유체저항력 모델을 구축하였으며, 이를 통하여 해저 시험집광기의 동적거동 해석을 수행하였다. 궤도속도, 지반조건, 항력계수 및 추가질량 계수의 변화에 따른 시험집광기의 동적응답을 분석하였다. We conducted a dynamic analysis of an underwater test collector, which operates on extremely soft soil of deep-seafloor. The underwater test collector consists of nodule pick-up device, vehicle tracks, nodule crusher, loading frame and electric-electronic system. The weight of underwater test collector is about 8600 kg. The average normal pressure, that the underwater test collector supports, is about 6.0 kPa. The dynamic analysis model of underwater test collector is developed using commercial software RecurDyn-LM and Visual Fortran 90. A terramechanics model of extremely soft soil is implemented to the software based on user-written subroutine and applied to the dynamic analysis of the underwater test collector model. The dynamic responses of test collector are studied with respect to track velocities, terrain conditions, and coefficients of added mass and drag.

사무실 건축의 발달과정

김형우,Kim, Hyeong-U 대한건축사협회 1979 建築士 Vol.1979 No.9