Saccharomyces cerevisiae에서 Cycloinulooligosaccharide Fructanotransferase 유전자의 표층 발현

김현진,이재형,김현철,김연희,권현주,남수완,Kim, Hyun-Jin,Lee, Jae-Hyung,Kim, Hyun-Chul,Kim, Yeon-Hee,Kwon, Hyun-Ju,Nam, Soo-Wan 한국생명과학회 2007 생명과학회지 Vol.17 No.2

Paenibacillus macerans 유래의 cycloinulooligosaccharide fructanotransferase (CFTase) 유전자(cft, 2832 bp, 103.8 kDa)를 효모 표층발현 vector인 pCTcon (GAL1 promoter)에 subcloning 하였다. 구축된 pCTECFTN (9.0 kb)를 숙주세포인 s. cerevisiae EBY100에 형질전환한 후, uracil이 결핍된 배지와 inulin 함유배지에서 선별하였다. cft 유전자는 GAL1 promoter에 의해 효모 형질전환체에서 성공적으로 발현되었다. inulin으로부터 cyclofructans (CFs)로 생산하는 효소적 능력으로부터 표층발현 유무를 확인하였다. YPDG배지에서 48시간 배양 후 분획한 균체는 5.52 unit/ l 의 활성을 보였다. CF 생산을 위한 효소의 최적 반응 조건으로 pH 8.0, 반응온도 $50^{\circ}C$, 기질농도 5%, 기질은 Jerusalem artichoke 등의 inulin과 표층 발현 CFTase 효소반응 결과, cycloinulohexaose (CF6), cycloinuloheptaose (CF7), 그리고 cycloinulooctaose (CF8)이 생성되었고, 이 중에서 CF6가 주 생성물이었다. The cycloinulooligosaccharide fructanotransferase (CFTase) gene (cft) from Paenibacillus macerans was subcloned into the surface display vector, pCTcon (GAL1 promoter). The constructed plasmid, pCTECFTN (9.0 kb) was introduced to S. cerevisiae EBY100 cell and then east transformants were selected on the synthetic defined medium lacking uracil and on the inulin containing medium. The surface display of CFTase was confirmed by immunofluorescence microscopy and its enzymatic ability to form cycloinulooligosaccharides(cyclofructans, CFs) from inulin. The total activity of the CFTase was reached about 5.52 unit/1 by cultivation of yeast transformant on YPDG medium. The optimized conditions determined were as follows; pH, 8.0; temperature, $50^{\circ}C$ ; substrate concentration, 5%; inulin source, Jerusalem artichoke. By the reaction with inulin, CFs consisting of cycloinulohexaose (CF6), cycloinuloheptaose (CF7), and cycloinulooctaose (CF8) were produced and CF6 was the major product.

음파 가진을 이용한 2차원 웨이크 유동 제어에 관한 연구

김현진,김재호,김명균,Kim, Hyeon-Jin,Kim, Jae-Ho,Kim, Myeong-Gyun 대한기계학회 1998 大韓機械學會論文集B Vol.22 No.6

In a low speed open-type wind tunnel, a group of parallel wakes downstream of two dimensional grid model consisting of several circular cylinders were experimentally investigated to study the response of the wake flows to the acoustic excitation, in hoping to promote the understanding of the underlying mechanism behind the gross flow change due to artificial excitation. In the unexcited wake flows, the development of the individual wakes behind cylinders was almost uniform for the ratio of the spacing to the cylinder diameter of s/d.geq.1.5. For smaller s/d, however, the jet streams issued through the gaps between the cylinders became biased in one side and the cylinders had wakes of different sizes. At s/d=1.25, the gap flow directions change in time, leading to unstable wake patterns. Further reduction in s/d made this unstable flip-flopping of the jets stable. The most effective excitation frequency was found to be in the Strouhal number range of St=0.5-0.6. This frequency was related to the vortex shedding. At s/d=1.75, the excitation frequency was 2 or 4 times the vortex shedding frequency. When the flow was excited at this frequency, the vortex sheddings were energized, and pairings between neighboring vortices were generated. Also, the merging process between individual wakes was accelerated. The unstable and unbalanced wake patterns at s/d=2.15 were made stable and balanced. The unstable and unbalanced wake patterns at s/d=2.15 were made stable and balanced. For smaller spacing of s/d .leq,1.0, the acoustic excitation became less effective in controlling the flow.

Burden of Disease Due to Outdoor Air Pollution in Korea: Based on PM₁₀

김현진,윤석준,김형수,이건세,김은정,조민우,오인환,Kim, Hyun-Jin,Yoon, Seok-Jun,Kim, Hyeong-Su,Lee, Kun-Sei,Kim, Eun-Jung,Jo, Min-Woo,Oh, In-Hwan Korean Society of Environmental Health 2011 한국환경보건학회지 Vol.37 No.5

Purpose: This study measured the burden of disease in Korea related to outdoor air pollution using disability-adjusted life year (DALY). Materials and Methods: As a risk factor of outdoor air pollution, particulate matter with a diameter less than 10 ${\mu}m$($PM_{10}$) was used. First, $PM_{10}$-related diseases and their relative risk (RR) were selected by means of a literature review. Second, population attributable fractions were computed by using formulae including RR and population exposure to $PM_{10}$. Third, DALYs of $PM_{10}$-related diseases in Korea were estimated. Finally, the attributable burden of disease due to $PM_{10}$ was measured as the sum of the products that multiplied the DALYs of $PM_{10}$-related diseases by their population attributable fractions. Results: The disease burden of PM10 was 6.9 DALY per 1,000 persons in 2007. The attributable burden of $PM_{10}$ was 2.68 for lung cancer, 2.41 for COPD, 0.62 for ischemic heart disease, 0.61 for pneumonia, 0.55 for asthma, and 0.03 for preterm. Conclusions: This study showed the environmental burden of disease of $PM_{10}$ and burden of $PM_{10}$-related disease through objective data. It also suggested that active efforts are needed to continuously measure and reduce the burden of environmental diseases in Korea.

Distribution of Aquaporins (Water Channels) in the Rat Salivary Glands

정지연(Ji-Yeon Jung),한창룡(Chang-Ryoung Han),정연진(Yeon-Jin Jeong),오원만(Won-Mann Oh),김미원(Mi-Won Kim1),김선헌(Sun-Hun Kim),김옥준(Ok-Joon Kim),김현진(Huyn-Jin Kim),고정태(Jeong-Tae Koh),최홍란(Hong-Ran Choi),김원재(Won-Jae Kim) 대한해부학회 2002 Anatomy & Cell Biology Vol.35 No.3

침샘은 하루 1.5 l의 침을 분비하며, 일반적으로 침샘에서 수분이동은 능동적 염분 이동에 따른 삼투현상에 의해 일어난다. 따라서 침샘에서 높은 수분투과성으로 인해 수분통로 단백인 aquaporin (AQP)들이 풍부하게 존재할 수 있다. 지금까지침샘에 4가지 형태의 AQP이 존재한다고 알려져 있지만 침샘에서 정확한 위치와 수분 이동에 대한 각 AQP들의 역할은 아직 확실치 않다. 본 연구는 300 g 정도의 흰쥐를 pentobarbital sodium (50 mg/kg, IP) 마취하에서 carbarchol (10 μg/kg)을 복강 내 투여한 후 AQP들의 역할과 분포를 면역조직화학방법으로 조사하였다. AQP1은 침샘의 미세혈관의 내피세포와 샘세포와 샘관 주위에 존재하는 근육상피세포에 존재하였다. AQP4는 침샘관의 마지막 부위인 배출관에 존재하였다. AQP5는 주로 장액세포의 바닥가쪽과 세포사이 분비소관을 포함한 세포꼭대기쪽막 에 존재하였으며 콜린성 분비 자극으로 세포꼭대기쪽막으로 이동되어 밀집되었다. AQP5는 모든 침샘의 사이관과 줄무늬 관에도 존재하였으며 점액세포는 약하게 존재하였다. AQP8은 AQP5처럼 장액세포의 바닥쪽막과 세포사이 분비소관을 포함한 세포꼭대기쪽막에 존재하였으며 콜린성 침분비 자극으로 세포꼭대기쪽막쪽으로 이동되어 밀집되었다. 이상의 실험결과는 AQP5와 AQP8이 장액세포에서 일차 침 형성시 일어나는 수분이동의 주된 통로임을 시사하였다. The salivary glands produce 1.5 l of fluid per day. As in other organs, the general paradigm in the salivary glands is that water movement occurs secondary to osmotic driving forces created by active salt transport. Therefore, high water permeability in salivary glands is expected to need a variety of aquaporin (AQP), a water channel. Although four AQPs have been known to reside in salivary glands, the precise location and roles of AQPs have been not well examined. This study is aimed to investigate the distribution of AQPs in 3 major salivary glands and their changes after cholinergic stimulation using immunohistochemical study in Sprague Dawley rats weighing 300 g under pentobarbital sodium anesthesia. AQP1 was localized in the endothelial cells of all salivary capillary vessels and the myoepithelial cells. AQP4 was demonstrated in the epithelium of the excretory ductal cells of all salivary glands. AQP5 and 8 were abundantly present in the basolateral membrane and apical membranes of the serous acini including intercellular secretory canaliculi, whereas AQP5 was weakly present in mucous acini. In addition, AQP5 was found in the epithelium of the intercalated and striated ducts. Upon stimulation of carbachol (10 μg/kg, I.P). AQP5 and 8 tended to translocate from basolateral membrane to the apical membrane, appearing as clusters of dots. These results suggest that AQP5 and 8 are the candidate molecules responsible for the water movement in salivary acinar cells.

오비터 진공펌프 성능해석

김현진,심재휘,Kim, Hyun-Jin,Shim, Jae-Hwi 한국유체기계학회 2006 한국유체기계학회 논문집 Vol.9 No.5

Orbiter mechanism has been applied to vacuum pump design for small oxygen generator where low vacuum of about 200 mmHg is required. Performance of the designed vacuum pump has been numerically investigated: calculated volumetric and adiabatic efficiencies were 69.7% and 83.9%, respectively for leakage clearance of $10{\mu}m$. Total efficiency of the orbiter vacuum pump was 77.5%. At the shaft speed of 1700 rpm suction displacement volume of 6.3cc provided discharge flow at the rate of 2.3 liter/min with power consumption of 10.1Watt. Torque variation of the orbiter pump was only about 20% of that of diaphragm pump.

고능력우의 전환기 사양관리(I)

김현진,Kim, Hyeon-Jin 한국종축개량협회 2006 種畜改良 Vol.11 No.5

제때 적절한 의료서비스 받았으면...

김현진,Kim, Hyeon-Jin 대한에이즈예방협회 2005 레드리본 Vol.67 No.-

아프지 않은 사람이 환자의 고통을 미뤄 짐작할 수는 있으나 완전히 이해하기는 어렵다. 차별 또한 이와 마찬가지이다. 피해 당사자가 아닐 경우 사소한 문제로 보이지만 당사자들 입장에서는 커다란 상처가 될 수 있다. 감염인 · 환자들에게는 병원 또한 그들에게 상처를 주는 장소라고 한다. 병원들이 조금만 신경을 쓰면 충분히 바뀔 수 있는 차별 환경들을 지난 호에 이어 연속적으로 살펴보고자 한다.

CIGS 태양전지 버퍼층으로의 활용을 위한 인듐설파이드의 전기화학적 합성

김현진,김규원,Kim, Hyeon-Jin,Kim, Kyu-Won 한국전기화학회 2011 한국전기화학회지 Vol.14 No.4

Copper indium gallium selenide (CIGS) 기반 박막 태양전지는 저렴한 제작 단가 및 다른 박막 태양전지에 비해 높은 효율을 보여 실리콘 기반 태양전지의 차세대 태양전지로 각광을 받고 있다. 구성 요소 중 buffer 층은 window 층과 absorber 층 사이의 높은 밴드 갭(band gap)을 해소 해주는 역할을 한다. 기존의 cadmium sulfide(CdS)의 인체 유해성 때문에 이를 대신할 indium sulfide(In2S3)를 이용한 buffer 층의 연구가 활발히 진행되고 있다. 본 연구에서는 전기화학적인 방법을 통해 값싸고 간편하게 indium sulfide buffer 층을 전극 표면에 합성하는 연구를 진행하였다. Indium-Tin-Oxide(ITO) 전극표면을 sodium thiosulfate 및 indium sulfate의 혼합물 용액에 담그고 환원 전위를 인가하여 indium sulfide를 합성하였다. 크기가 다른 두 전압을 교대로 인가하여 확산 한계(diffusion limit)를 최소화 함으로써 표면에 균일한 조성을 가지는 buffer 층을 합성해 낼 수 있었다. 또한 합성 중 온도의 조절을 통해 buffer 층의 밴드 갭을 최적화 할 수 있었다. 이렇게 전기화학적으로 합성된 buffer 층은 X-선 광전자 분광법과 회절법의 분석을 통해 ${\beta}$-indium sulfide 결정구조를 가짐을 확인 하였다. CIGS solar cells are kind of thin film solar cells, which are studied several years. CdS buffer layer that makes heterojunction between window layer and absorbing layer was one of issue in the CIGS solar cell study. New types of buffer layer consisted of indium sulfide are being studied these days owing to high price and environmental harmful of CdS. In this study, we demonstrated electrochemical synthesis of indium sulfide film as a buffer layer, which is cheaper and faster than other methods. A uniform indium sulfide film was obtained by applying two different alternating potentials. The band gap of the film was optimized by controlling temperature during the electrochemical synthesis. Using x-ray photoelectron spectroscopy and diffraction method we confirmed that ${\beta}$-indium sulfide was formed on ITO electrode surface.

고능력우의 전환기 사양관리 (II)

김현진,Kim, Hyeon-Jin 한국종축개량협회 2006 種畜改良 Vol.11 No.7

젖소 사양관리 합리화를 위한 방안(II)

김현진,Kim, Hyeon-Jin 한국종축개량협회 2006 種畜改良 Vol.11 No.9