금속분말 강화수지를 이용한 쾌속금형 제작

김범수,정해도,배원병,Kim, Beom-Su,Jeong, Hae-Do,Bae, Won-Byeong 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.1

As dies and molds have become more and more complicated in the recent years, the demand for lower cost and shorter production time is also growing stronger. Rapid prototyping and Tooling technologies are expected to be used for more rapid and lower cost tool fabrication. However the rapid tooling methods have not yet reached the level of application to the manufacturing of metallic dies and molds which require high dimensional accuracy. As the rapid tooling technology, there are the slurry casting, the powder casting, the direct laser sintering, and so on. Generally, in the slurry casting, the alumina powder and the water soluble phenol were mainly used. However, the mechanical properties of the phenol were not good enough to apply to molds directly. In this study, pure epoxy and two types of aluminium powder reinforced resin are applied to the slurry casting. The mechanical and thermal properties are better than phenol because the epoxy is the thermosetting resin. And mechanical characteristics such as shrinkage rate, hardness, surface roughness are measured for the sake of comparison. Metal powder reinforced resin molds are better than the resin tool form the viewpoint of shrinkage rate and hardness. Finally, it has been shown that the application possibility of this process is high, because the manufacturing time and cost savings are significant.

자력 선별 전로슬래그 미분말을 결합재로 활용한 모르타르의 기초특성

김범수,최선미,김진만,Beom-Soo Kim,Sun-Mi Choi,Jin-Man Kim 한국건설순환자원학회 2023 한국건설순환자원학회 논문집 Vol.11 No.3

전로슬래그는 용광로에서 생산된 선철을 용융강으로 정제하는 과정에서 배출되는 부산물로, 컨버터에서 생산되는 양의 약 15 %가 배출된다. 이 전로슬래그는 유리 CaO 함량이 높아 콘크리트 골재로 사용 시 팽창균열 가능성이 있어 재활용이 어렵다. 이를 해결하기 위해 전로슬래그를 야드에서 숙성시키지만 완벽하게 제어하기는 어렵다. 본 연구에서는 전로슬래그에 모르타르 제제를 혼합하여 연구를 수행함으로써 골재가 아닌 시멘트 대체재로 전로슬래그를 사용할 수 있는 가능성을 검토하였다. 실험에 사용된 전로슬래그의 EDS 결과, 분말상 대비 골재상일 때 자력선별을 진행하는 것이 T.Fe를 제거하는데 더 효과적인 것을 확인하였다. 분쇄효율 실험은 T.Fe가 많이 분류된 비자착분이 가장 높은 분말도를 나타내었다. 이런 고분말도로 인해 전로슬래그를 15 % 치환했을 때 Plain 대비 비자착분의 플로가 가장 많이 감소하였다. 전로슬래그를 혼입한 모르타르의 길이변화는 재령이 증가할수록 변화율이 커지지만 Plain 대비 유사한 변화율이 나타났다. 압축강도에서는 Plain 대비 비자착분은 치환율 15 %까지 91.9~97.1 %의 강도 발현을 나타내었다. 추후 전로슬래그 미분말을 시멘트 대체재로 활용할 경우, 분쇄 전 자력(Gauss) 조절을 통한 최적의 자력선별 조건을 찾아 더 효율적인 T.Fe 선별 방법이 필요할 것으로 판단되며, EDS 및 Mapping은 국부적인 분석방법으로 큰 편차율을 보이기 때문에 다수의 시료 평가가 필요할 것으로 판단된다. Converter slag is a by-product generated by refining the pig iron produced into molten steel in the blast furnace, occupying about 15 % of the weight of steel production. It has a high free-CaO content that can generate expansion cracks when used for concrete aggregate. This is the main reason to make it difficult to recycle. To solve this problem, government guideline requires that converter slag has to be aged in an open yard for 90 days. However, aging can not be perfectly performed because it entails time and cost. In this study, we tried to investigate the applicability of converter slag as a cementitious material rather than an aggregate by mixing converter slag with mortar formulations. According to the EDS results of the converter slag in the experiment, we found that screening in the aggregate phase was more effective than that in the powder phase. When the particles separated by a magnet in the aggregate state were pulverized and used for concrete up to a 15 % replacement ratio, various engineering characteristics, such as flow, length change, and compressive strength, showed engineering characteristics similar to those of the control mix.

연구발표논문초록 ( 생물화공 (2) ) : 순환한외여과에 의한 막분리 성능의 향상

김범수,장호남 (정) ( Beom Soo Kim,Ho Nam Chang ) 한국화학공학회 1989 추계학술발표회 Vol.- No.-

Angiogenin-loaded fibrin/bone powder composite scaffold for vascularized bone regeneration

김범수,Jin-Seong Kim,Sun-Sik Yang,Hyung-Woo Kim,임헌준,이준 한국생체재료학회 2015 생체재료학회지 Vol.19 No.3

Background: Angiogenin (ANG) is a potent stimulator of angiogenesis. The aim of this study was to fabricate an ANG-loaded scaffold and to evaluate its angiogenic and osteogenic effects. In this study, we fabricated an ANG-loaded scaffold using bovine bone powder and fibrin glue. We then evaluated the structural, morphological, and mechanical properties of the scaffold and the in vitro release profile of ANG. Cell proliferation, viability, and adhesion were evaluated using endothelial cells in vitro, and angiogenesis and new bone formation were evaluated using a rabbit calvarial defect model in vivo. Results: Micro-computed tomography imaging showed that the bone powder was uniformly distributed in the scaffold, and scanning electron microscopy showed that the bone powder was bridged by polymerized fibrin. The porosity and compressive strength of the scaffolds were ~60 % and ~0.9 MPa, respectively, and were not significantly altered by ANG loading. In vitro, at 7 days, approximately 0.4 μg and 1.3 μg of the ANG were released from the FB/ANG 0.5 and FB/ANG 2.0, respectively and sustained slow release was observed until 25 days. The released ANG stimulated cell proliferation and adherence and was not cytotoxic. Furthermore, in vivo implantation resulted in enhanced angiogenesis, and new bone formation depended on the amount of loaded ANG. Conclusions: These studies demonstrate that a fibrin and bone powder scaffold loaded with ANG might be useful to promote bone regeneration by enhanced angiogenesis.

호주의 의과대학 입문적성검사- UMAT, GAMSAT를 중심으로 -

김범수,Kim, Beom-Su 연세대학교 의과대학 2002 의학교육논단 Vol.4 No.1

벨로우즈 방식의 폐회로를 가진 공압식 심실 보조장치의 최적 작동을 위한 압력 조절 시스템

김범수,이정주,남경원,정기석,안치범,선경,Kim, Bum-Soo,Lee, Jung-Joo,Nam, Kyung-Won,Jeong, Gi-Seok,Ahn, Chi-Bum,Sun, Kyung 대한의용생체공학회 2007 의공학회지 Vol.28 No.4

Ventricular Assist Device(VAD) has switched its goal from a short-tenn use for bridge-to-transplantation to a long-tenn use for destination therapy, With this goal, the importance of long-tenn reliability gets more interests and importances, H-VAD is an portable extracorporeal biventricular assist device, and adopts an electro-pneumatic driving mechanism. The pneumatic pressure to pump out blood is generated with compression of bellows, and is transmitted in a closed pneumatic circuit through a pneumatic line. The existing pneumatic VAD adopts a air compressor which can generate stable pressures but has defects such as a noise and a size problem. Thus, it is not suitable for being used as a portable device, These problems are covered with adopting a closed pneumatic circuit mechanism with a bellows which has a small size and small noise generation, but it has defects that improper pneumatic setting causes a failure of adequate flow generation. In this study, the pneumatic pressure regulation system is developed to cover these defects of a bellows-type pneumatic VAD. The optimal pneumatic pressure conditions according to various afterload conditions for an optimal flow rate were investigated and the afterload estimation algorithm was developed, The final pneumatic regulation system estimates a current afterload and regulate the pneumatic pressure to the optimal point at a given afterload condition. The afterload estimation algorithm showed a sufficient performance that the standard deviation of error is 8.8 mmHg, The pneumatic pressure regulation system showed a sufficient performance that the flow rate was stably governed to various afterload conditions. In a further study, if a additional sensor such as ultrasonic sensor is developed to monitor the direct movement of diaphragm in a blood pump part, the reliability would be greatly increased. Moreover, if the afterload estimation algorithm gets more accuracy, it would be also helpful to monitor the hemodynamic condition of patients.

금연법 강화가 흡연에 미치는 영향

김범수,김아람,Kim, Beomsoo,Kim, Ahram 한국개발연구원 2009 韓國 開發 硏究 Vol.31 No.2

국내외적으로 간접흡연이나 환경 속 담배연기가 미칠 수 있는 해악에 대한 관심이 고조되고 있으며, 그 결과 작업공간 내 금연정책이 점차 늘어나고 있다. 한국에서도 작업공간 내 금연정책이 2003년 국민건강증진법 개정으로 훨씬 강화되었다. 본 논문에서는 2001년과 2005년에 이루어진 국민건강영양조사를 이용하여 강화된 금연정책이 흡연율과 일평균 흡연 개비 수에 미친 영향을 분석하고자 한다. 금연법강화가 실내 작업공간 위주로 이루어진 점에 착안하여 법 개정의 영향을 많이 받은 실내근무자 직업군과 영향을 비교적 덜 받는 실외근무자 직업군을 비교하였다. 추정 결과, 금연법 강화로 95% 수준에서 유의하게 흡연율은 4.1%p 감소하였고, 흡연자 중 일평균 흡연 개비는 2.5개비 줄어든 것으로 나타났다. There is a growing concern about potential harmful effect of second-hand or environmental tobacco smoking. As a result, smoking bans in workplace become more prevalent worldwide. In Korea, workplace smoking ban policy become more restrictive in 2003 when National health enhancing law was amended. The new law requires all office buildings larger than 3,000 square meters (multi-purpose buildings larger than 2,000 square meters) should be smoke free. Therefore, a lot of indoor office became non smoking area. Previous studies in other counties often found contradicting answers for the effects of workplace smoking ban on smoking behavior. In addition, there was no study in Korea yet that examines the causal impacts of smoking ban on smoking behavior. The situation in Korea might be different from other countries. Using 2001 and 2005 Korea National Health and Nutrition surveys which are representative for population in Korea we try to examine the impacts of law change on current smoker and cigarettes smoked per day. The amended law impacted the whole country at the same time and there was a declining trend in smoking rate even before the legislation update. So, the challenge here is to tease out the true impact only. We compare indoor working occupations which are constrained by the law change with outdoor working occupations which are less impacted. Since the data has been collected before (2001) and after (2005) the law change for treated (indoor working occupations) and control (outdoor working occupations) groups we will use difference in difference method. We restrict our sample to working age (between 20 and 65) since these are the relevant population by the workplace smoking ban policy. We also restrict the sample to indoor occupations (executive or administrative and administrative support) and outdoor occupations (sales and low skilled worker) after dropping unemployed and someone working for military since it is not clear whether these occupations are treated group or control group. This classification was supported when we examined the answers for workplace smoking ban policy existing only in 2005 survey. Sixty eight percent of indoor occupations reported having an office smoking ban policy compared to forty percent of outdoor occupation answering workplace smoking ban policy. The estimated impacts on current smoker are 4.1 percentage point decline and cigarettes per day show statistically significant decline of 2.5 cigarettes per day. Taking into account consumption of average sixteen cigarettes per day among smokers it is sixteen percent decline in smoking rate which is substantial. We tested robustness using the same sample across two surveys and also using tobit model. Our results are robust against both concerns. It is possible that our measure of treated and control group have measurement error which will lead to attenuation bias. However, we are finding statistically significant impacts which might be a lower bound of the true estimates. The magnitude of our finding is not much different from previous finding of significant impacts. For cigarettes per day previous estimates varied from 1.37 to 3.9 and for current smoker it showed between 1%p and 7.8%p.

국가발전을 위한 인프라

김범수,Kim, Beom-Su 한국정보통신집흥협회 1996 정보화사회 Vol.107 No.-

당일 입원 환자의 치과 수술 시 Propofol을 이용한 Monitored-Aesthesia Care (MAC)의 안정성 및 유용성에 관한 연구

김범수,김영균,윤필영,이용인,Kim, Bum-Soo,Kim, Young-Kyun,Yun, Pil-Young,Lee, Yong-In 대한치과마취과학회 2007 Journal of Dental Anesthesia and Pain Medicine Vol.7 No.2

Background: Propofol has been used extensively for short-acting intravenous sedative agent during monitored anesthesia care (MAC). This study was designed to evaluate the safety and availability of MAC using propofol in implant surgery of the one-day admission patients. Methods: In this study, subjects were divided into two groups according to ASA physical status. The heart rate, blood pressure, peripheral oxygen saturation and ECG of a patient were estimated under MAC by an anesthesiologist and the vital signs were recorded in recovery room periodically afterwards. The subjective satisfaction with regard to outpatient ambulatory surgery under MAC procedure was evaluated the next day. Results: Systolic and diastolic blood pressure were significantly decreased during MAC in ASA I group, but other remarkable changes in vital sign were not observed. There was no significant difference in pain and anxiety level between ASA I and ASA II, III group. Satisfaction rate was high in both groups. Conclusion: Monitored-Anesthesia Care using propofol during implant surgery of the one-day admission patients might be safe and available procedure because heart rate, blood pressure and oxygen saturation are stable before and during surgery, and adequate control of pain and anxiety is supported.

링크 유효시간에 따른 OLSR 토폴로지 그래프 생성 방법

김범수,노봉수,김기일,Kim, Beom-Su,Roh, BongSoo,Kim, Ki-Il 대한임베디드공학회 2019 대한임베디드공학회논문지 Vol.14 No.4

One of the most widely studied protocols for tactical ad-hoc networks is Optimized Link State Routing Protocol (OLSR). As for OLSR research, most research work focus on reducing control traffic overhead and choosing relay point. In addition, because OLSR is mostly dependent on link detection and propagation, dynamic Hello timer become research challenges. However, different timer interval causes imbalance of link validity time by affecting link lifetime. To solve this problem, we propose a weighted topology graph model for constructing a robust network topology based on the link validity time. In order to calculate the link validity time, we use control message timer, which is set for each node. The simulation results show that the proposed mechanism is able to achieve high end-to-end reliability and low end-to-end delay in small networks.