http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
기상 상태 변화에 따른 직육면체의 재질별 표면온도 변화 특성에 대한 실험 연구
김동건,최준혁,길태준,김정호,김태국,Kim, Dong-Geon,Choi, Jun-Hyuk,Kil, Tae-Jun,Kim, Jung-Ho,Kim, Tae-Kuk 한국군사과학기술학회 2012 한국군사과학기술학회지 Vol.15 No.2
The spectral radiance received by a remote sensor is consisted of the self-emitted component directly from the target surface, the reflected component of the solar irradiance at the target surface, and the scattered component by the atmosphere without ever reaching the object surface. In general, the self-emitted component is the most important part in the infrared signatures from the target. We measured the solar irradiation, sky irradiation, air temperature, wind velocity, wind direction, relative humidity, and atmospheric pressure together with the surface temperatures of rectangular parallelepiped targets. The measured diurnal surface temperature variations on the three different rectangular parallelepiped targets constructed by the steel, aluminum and bakelite are obtained at the same time intervals. The measured surface temperature results show that the top surface temperature of bakelite recorded up tp $7.6^{\circ}C$ higher than that of aluminium and $6.1^{\circ}C$ higher than that of steel at 11 AM on the sunny condition. A complete set of measured data including the surface temperature of rectangular parallelepiped targets together with the detailed weather information can be a valuable reference for future study.
위성용 전개형 고안정 반사판 안테나 복합재 주반사판 설계 및 해석
김동건,구경래,김현국,송성찬,권성철,임재혁,김영배,Dong-Geon Kim,Kyung-Rae Koo,Hyun-Guk Kim,Sung-Chan Song,Seong-Cheol Kwon,Jae-Hyuk Lim,Young-Bae Kim 한국복합재료학회 2023 Composites research Vol.36 No.3
The deployable reflector antenna consists of 24 unit main reflectors, and is mounted on a launch vehicle in a folded state. This satellite reaches the operating orbit and the antenna of satellite is deployed, and performs a mission. The deployable reflector antenna has the advantage of reduce the storage volume of payload of launch vehicle, allowing large space structures to be mounted in the limited storage space of the launch vehicle. In this paper, structural analysis was performed on the main reflector constituting the deployable reflector antenna, and through this, the initial conceptual design was performed. Lightweight composite main reflector was designed by applying a carbon fiber composite and honeycomb core. The laminate pattern and shape were selected as design variables and a design that satisfies the operation conditions was derived. Then, the performance of the lightweight composite reflector antenna was analyzed by performing detailed structural analysis on modal analysis, quasi-static, thermal gradient, and dynamic behavior.
아두이노를 이용한 위치정보 기반 안전한 자전거 애플리케이션
김동건,이호세,김소영,김태우,이형우,Kim, Dong-Gun,Lee, Ho-Se,Kim, So-Young,Kim, Tae-Woo,Lee, Hyung-Woo 한국사물인터넷학회 2016 한국사물인터넷학회 논문지 Vol.2 No.1
최근 자전거 이용자가 천만 명을 돌파하면서 자전거 라이딩은 일상생활의 요소로 자리 잡고 있다. 하지만, 이용자가 늘어날수록 사고의 위험에 무방비로 노출되면서 보다 안전하게 라이딩을 할 수 있는 예방 대책 수립이 절실하다. 이에 본 논문에서는 GPS 정보를 통하여 획득된 위치정보를 활용하여 사용자에게 주행 상황에 맞는 다양한 서비스를 제공할 수 있는 애플리케이션을 개발하였다. 이를 위해 안드로이드와 아두이노 기반 디바이스간 블루투스 송수신을 통해 자전거 전용 내비게이션 기능을 제공하여 안전성을 향상시킬 수 있었다. 향후 다양한 형태의 아두이노 센서로 확장할 경우 개인 맞춤형 모바일 IoT 서비스로 발전시킬 수 있을 것이라 기대한다. Bicycle users were surpassed a million recently as bicycle riding will be a key element of daily life. As users increase, we can expect that the user is more exposed to the risk of an unexpected accident. Therefore, we need to establish several preventive measures for a safe riding environment. In this paper, we developed mobile application by using the acquired GPS-based location information that provide safety services for the bike riding as a LBS service. In detail, we have been able to provide a bicycle safety navigation service by using the bluetooth transmission and reception method between Android and Arduino-based devices. As a future work, the safety could be improved if we expand various forms of Arduino sensors. As a result, a service developed in this study will be able to converge ahead to connect into several personalized mobile IoT services.
수치료(水治療) 중 온천요법의 한의학적 문헌고찰 및 효능에 대한 연구
김동건,허성규,김유진,허영진,공인표,한석훈,조영호,공경환,정수현,차윤엽,Kim, Dong-Gun,Heo, Seong-Kyu,Kim, Eu-Gene,Heo, Young-Jin,Kong, In-Pyo,Han, Seok-Hun,Cho, Young-Ho,Kong, Kyung-Hwan,Jeong, Su-Hyeon,Cha, Yoon-Yeop 대한한방안이비인후피부과학회 2007 한방안이비인후피부과학회지 Vol.20 No.2
Objectives : The purpose of this study is to consider the definition, history, classification and clinical effect of balneotherapy. Methods : We researched oriental documents and recent sources of balneotherapy. Results and Conclusions : 1. Balneotherapy is medical cure method which uses physical chemistry effects of water. 2. Records of balneotherapy are seen in oriental documents such as Hwangjenaegyeong(黃帝內經), Sinnongbonchogyeong(神農本草經), Jaebyoungwonhuron(諸病源候論), Youmoonsachin(儒門事親), Bonchogangmok(本草綱目) and Donguibogam(東醫寶鑑) etc. 3. Spa can classify eleven types according to ingredient. The types were as following. Simple thermal spirng, Common salt spring, Sodium bicarbonated spring, Sulfate spring, Radioactive spring, Acid spring, Sulfur spring, Carbon dioxide spring, Iron spring, Alum spring & Sulfate-iron spring, Bicarbonatealkaline spring. 4. Physical, chemical and environmental effect of spa therapy have effectiveness on the chronic and we akness disease more than acute disease. And balneotherapy have more effectiveness on digestive disease, pulmonary disease, metabolic disease, circulatory disease, muscle skeletal disease and dermatologic disease than any other diseases.
김동건,길경석,Kim, Dong-Geon,Kil, Gyung-Suk 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.9
This paper conducted a study on how the heat radiation of light emitting diode(LED) luminaires affects the indoor temperature increase. The effect was compared with that of a 20 W compact fluorescent lamp(CFL) and a 50 W MR16 halogen lamp which are most widely used inside of cruises, a LED downlight and a 4W MR16 LED replacing each of them. We installed a luminarie inside a thermally shielded chamber, measuring the temperature changes under the same volume every 5 minutes and compared the result with theoretically calculated heat radiation. The temperature changes in the chamber was measured four times, on seven hours' period in order to keep sufficient time once the temperature reaches the thermal equilibrium state. The results showed that the temperature of the 20 W E26 CFL and the 10 W LED downlight increased by $21.1^{\circ}C$ and $10.4^{\circ}C$ respectively, while that of the 50 W halogen MR16 and the 4 W LED MR16 increased by $33.9^{\circ}C$ and $4.8^{\circ}C$ respectively. The experimental heat radiation were calculated from the results and the experimental heat radiation of the CFL and the LED downlight were 171.5 cal and 86.5 cal, and those of the halogen MR16 and the LED MR16 were 275.3 cal and 36.5 cal. Therefore, the heat radiation was reduced by 49.5% and 86.7%, respectively, by replacing conventional light source with LED. In conclusion, we can expect a reduction of power consumption in air condition system and the effect on indoor temperature increase by application of LED luminaires.