인태아 상경신경절 발육에 관한 전자현미경적 연구

김대영,김백윤,윤재룡,Kim, Dae-Young,Kim, Baik-Yoon,Yoon, Jae-Rhyong 한국현미경학회 1998 Applied microscopy Vol.28 No.2

The development of the superior cervical ganglion was studied by electron microscopic method in human fetuses ranging from 40 mm to 260 mm of crown-rump length (10 to 30 weeks of gestational age). At 40 mm fetus, the superior cervical ganglion was composed of clusters of undifferentiated cell, primitive neuroblast, primitive supporting cell, and unmyelinated fibers. At 70mm fetus, the neuroblasts and their processes were ensheated by the bodies or processes of satellite cells. The cytoplasm of the neuroblast contained rough endoplasmic reticulum, mitochondria, Golgi complex, Nissl bodies and dense-cored vesicles. As the neuroblasts grew and differentiated dense-cored vesicles moved away from perikaryal cytoplasm into developing processes. Synaptic contacts between the cholinergic axon and dendrites of postganglionic neuron and a few axosomatic synapses were first observed at 70 mm fetus. At 90 mm fetus the superior cervical ganglion consisted of neuroblasts, satellite cells, granule-containing cells, and unmyelinated nerve fibers. The ganglion cells increased somewhat in numbers and size by 150 mm fetus. Further differentiation resulted in the formation of young ganglion cells, whose cytoplasm was densely filled with cell organelles. During next prenatal stage up to 260 mm fetus, the cytoplasm of the ganglion cells contained except for large pigment granules, all intracytoplasmic structures which were also found in mature superior cervical ganglion. A great number of synaptic contact zones between the cholinergic preganglionic axon and the dendrites of the postganglionic neuron were observed and a few axosomatic synapses were also observed. Two morphological types of the granule-containing cells in the superior cervical ganglion were first identified at 90 mm fetus. Type I granule-containing cell occurred in solitary, whereas type II tended to appeared in clusters near the blood capillaries. Synaptic contacts were first found on the solitary granule-containing cell at 150 mm fetus. Synaptic contacts between the soma of type I granule-containing cells and preganglionic axon termials were observed. In addition, synaptic junctions between the processes of the granule- containing cells and dendrites of postganglionic neuron were also observed from 150 mm fetus onward. In conclusion, superior cervical ganglion cells and granule-containing cells arise from a common undifferentiated cell precursor of neural crest . The granule-containg cells exhibit a local modulatory feedback system in the superior cervical ganglion and nay serve as interneurons between the preganglionic and postganglionic cells.

바람과 대공간 구조물

김대영,김지영,김상대,Kim, Dae-Young,Kim, Ji-Young,Kim, Sang-Dae 한국공간구조학회 2005 한국공간구조학회지 Vol.5 No.1

골수섬유증과 관련된 양측 수부의 괴저성 농피증

김대영,원영호,김성진,이승철,전인기 ( Dae Young Kim,Young Ho Won,Seong Jin Kim,Seung Chul Lee,Inn Ki Chun ) 대한피부과학회 1997 대한피부과학회지 Vol.35 No.4

Pyoderma gangrenosum is a rare neutrophilic dermatosis manifesting as painful pustules or bullae, which rapidly become necrotic to produce an ulceration. It is often associated with systemic disease, such as inflammatory bowel disease, rheumatoid arthritis, leukemia, but myelofibrosis is reported rarely for its underlying disease. The most common location is the lower extremities, and the pyoderma gangrenosum also occur infrequently on the hand and face. As in our case, bilateral involvement of the hands are rarely reported. We present a case of pyoderma gangrenosum that had developed on both hands in a 66 year old man who had macrocytic,anemia. A bone marrow biopsy revealed proliferation of fibroblasts and a dense reticulin network consistent with myelofibrosis, the association of which is very rare world wide. (Kor J Dermatol 1997;35(4): 809-813)

비부식성 플럭스를 이용한 알루미늄 브레이징용 필러 소재의 저온 성형용 금속 복합 분말 개발

김대영,장하늘,윤대호,신윤호,김성호,최현주,Kim, Dae-Young,Jang, Ha-Neul,Yoon, Dae-Ho,Shin, Yun-Ho,Kim, Seong-Ho,Choi, Hyun-Joo 한국분말재료학회 (*구 분말야금학회) 2019 한국분말재료학회지 (KPMI) Vol.26 No.1

In aluminum brazing processes, corrosive flux, which is used in preventing oxidation, is currently raising environmental concerns because it generates many pollutants such as dioxin. The brazing process involving non-corrosive flux is known to encounter difficulties because the melting temperature of the flux is similar to that of the base material. In this study, a new brazing filler material is developed based on aluminum and non-corrosive flux composite powder. To minimize the interference of consolidation aluminum alloy powder by the flux, the flux is intentionally embedded in the aluminum alloy powder using a mechanical milling process. This study demonstrates that the morphology of the composite powder can be varied according to the mixing process, and this significantly affects the relative density and mechanical properties of the final filler samples.

설계공모 - 서울시립도서관(서대문)

김대영,Kim, Dae Young 대한건축사협회 2023 建築士 Vol.645 No.-

LCC Analysis to Determine an Appropriate Apartment Rent Rate for HVAC System Renovation Projects

김대영,임형철,Kim, Dae Young,Lim, Hyoung-Chul Korea Society of Industrial Information Systems 2015 한국산업정보학회논문지 Vol.20 No.5

Residential building owners are turning toward renovating their existing buildings to improve old and inefficient HVAC systems. Due to the renovation, much of the added costs will inevitably be passed on to tenants by increasing rent rates. This increment often increases the vacancy rate in the buildings. To balance the interests of both owners and tenants, this paper suggested a method to determine an appropriate rental rate increment for the HVAC system renovation. A case study on residential buildings was conducted to determine a balanced point where the rental rate increment that offsets the amount tenants are willing to pay for the renovation. To calculate all costs incurred by the renovation, life-cycle cost analysis was carried out. Therefore, this paper ultimately provides a threshold value of rental rate increment such that building owners can make a reasonable decision on the HVAC system renovation.

린 건설 수행에 따른 인적자원의 동기유발

김대영,Kim, Dae-Young 한국건설관리학회 2006 건설관리 : 한국건설관리학회 학회지 Vol.7 No.3

린 건설이 소개되어진 이후 많은 린 건설 관련 연구들이 진행되어지고 있다. 하지만 기존의 연구들은 린 건설 개념과 기법 개발에 중점을 두고, 기계적 합리성과 기술적 효율성만을 향상시키는데 그 초점을 맞추고 있으며, 린 건설의 인적 자원 측면에서의 연구는 거의 이루어지지 않고 있다. 따라서 도입 초기 단계인 국내의 린 건설의 활성화와 보급화를 위해서는 한번쯤 이러한 연구가 이루어져야 할 것으로 생각된다. 왜냐하면 린 건설 도입 초기 단계에 있어서 린 건설에 필요한 많은 기능들을 수행하고 이의 잠재성을 성공적으로 이끌어내기 위해서는 참여 건설 인력의 잠재성과 능력에 상당 부분 의존할 수 발 에 없기 때문이다. 본 연구에서는 국내 현장 조사에 앞서 미국 내 린 건설을 적용하고 있는 건설 현장의 원도급자와 하도업자를 포함한 작업 인력들에 대해 설문조사 및 인터뷰를 통해 린 건설이 인적자원과 어떠한 관련이 있으며 어떤 효과를 제공할 수 있는 지에 관하여 분석하고자 한다. 본 연구의 결과는 린 건설이 건설 현장에서 적절히 도입되고 수행되어질 경우 인적 자원의 능력 향상 및 작업 동기 유발에 큰 도움이 될 수 있음을 보여준다. 린 건설은 무엇보다도 공사 참여자들 간의 관계 개선에 중점을 두고 있기 때문에 린 건설을 수행하는데 있어서 인적자원과의 연관성을 잊어서는 안 될 것이다. Since Lean Construction has been introduced in 1992, much research is in progress to popularize lean concepts and principles. Most research focuses on developing lean concepts and tools and strengthening the limited domain of instrumental rationality and technical efficiency. However, the basic concepts of human resource management seem to be ignored by those who advocate lean production. Thus, the lean construction research related to human resource management must be once considered for popularization and activation of lean construction at the beginning stage in the domestic construction industry. Because human resources have a major influence on lean implementation and its success, especially at the beginning stage of lean construction. This paper considers the human resource requirements for the implementation of lean construction in the USA construction industry. The results from the study will provide the foundations to adapt lean construction into the domestic construction industry. Consequently, the study found that lean construction could improve the capability of human resource and human motivation if effectively implemented in the construction sites. Since lean construction emphasizes and focuses on improvement of relationships among project participants, constant application to human resource management is crucial for successful lean implementation.

탄성계수 불확실성을 고려한 반강접 프레임 구조의 확률적 비선형 거동 해석

김대영,노혁천,Kim, Dae Young,Noh, Hyuk Chun 한국전산구조공학회 2013 한국전산구조공학회논문집 Vol.26 No.3

본 논문에서는 반강접을 고려한 프레임 구조에서 강재 탄성계수의 불확실성이 프레임 구조의 비선형거동에 미치는 영향을 분석하였다. 강재 탄성계수의 불확실성의 확률분포는 정규분포로 모델링 하였으며, 이러한 확률적 물성치를 반강접 프레임의 비선형 거동에 적용할 수 있는 해석 프로그램을 개발하였다. 프레임의 비선형 거동 인수인 기하학적 비선형, 재료적 비선형, 그리고 접합부의 반강접에 의한 비선형 효과를 고려하여, Monte Carlo Simulation에 기반한 확률론적 해석을 수행하였다. 확률론적 해석을 위해 확률변수를 세 종류로 생성하여 사용하였다. 확정론적 해석의 결과는 기존의 연구 결과와 잘 일치하는 결과를 보였다. 확률론적 해석의 경우, 변위의 분산계수는 구조에 작용하는 하중이 증가함에 따라 증가하는 결과를 나타냈으며, 그 값은 프레임구조의 구조적 특성에 영향을 받는 것으로 나타났다. In this paper, the effects of uncertain material constant on the nonlinear behavior of steel frames with semi-rigid joints are examined. As to the probabilistic model, a normal distribution is assumed to simulate the uncertain elastic modulus of steel material. A nonlinear structural analysis program, which can consider both semi-rigidity in joints of the steel frames and uncertainty in the material constant, is developed. Including the geometric, material and connection nonlinearites which are the parameters of nonlinear behavior of steel frames, probabilistic analysis is conducted based on the Monte-Carlo simulation. In the probabilistic analyses, we consider the three different cases for random variables. The deterministic analysis results are shown to be in good agreement with those of the previous research results in the literature. As to the probabilistic analyses, it is observed that the coefficient of variation(COV) of displacements increases as the loading increases, and that the values of COV are dependent on the structural features of the frames.

효과적인 린 건설 수행을 위한 린 시스템 운용 방안 제시

김대영,Kim, Dae-Young 한국건설관리학회 2005 건설관리 : 한국건설관리학회 학회지 Vol.6 No.6

린 건설은 건설 관리의 새로운 방향을 제시해준다. 제조업체로부터 시작된 린 건설은 제조업의 생산활동과는 판이하게 다를 수 있는 건설업의 생산 업무를 효율적으로 조정해 주는데 역점을 두고 있다. 미국 LCI협회는 작업 흐름의 관리와 보다 효율적인 공정 및 계획 관리를 위해 최종 계획 관리 시스템을 개발하여 건설업체에 보급, 린 건설의 활성화를 유도하고 있는데, 이것이 바로 라스트 플래너 시스템(Last Planner System: LPS)이다. 국내에서도 린 건설에 대한 관심이 증가되고 있는 가운데 여러 번에 걸쳐 이 LPS의 소개가 이루어 졌으나 공사현장 참여자들의 비교적 상세한 지침서는 아직 제시된 바 없는 것으로 사료된다. 이에 본 연구에서는 국내 건설현장에서 린 시스템의 보다 효율적인 적용과 수행을 가능케 하기 위한 토대 마련을 제공하고자 하였다. 따라서, 본 연구에서는 문헌조사, 현장 방문을 통한 인터뷰 및 설문조사, 그리고 현장의 린 건설 수행 실태 분석 등을 통하여 린 건설 수행 시 공사 참여자들의 역할과 의무를 정리하였고 린 시스템 중 가장 일반적으로 현장에 적용되어지고 있는 라스트플래너(Last Planner)의 운용 가이드를 제시하였다. 이와 더불어 린 시스템 적용 관리 모델을 제시하여 공사참여자들의 린 건설의 원활한 수행을 유도하는데 도움이 되고자 한다. Since Lean Construction has been introduced as a new management approach to improve productivity in the construction industry, much research is in progress to develop lean concepts and principles for better implementation and to get results of the successful adaptation of lean ideas from manufacturing for application in the construction industry. Currently, Lean Construction Institute developed Last Planner System to achieve better workflow and effective planning management. Domestic construction companies are also getting interested in the Lean Construction. However, there are no detailed guidelines how to implement lean system. Thus, this study will provide a guideline for deployment of last planner system, a prototype lean implementation control checklist, and all project participants roles based on the case studies in USA. This study should provide a framework to apply lean construction to domestic construction sites.

A Theoretical Study on Minimum-Bandwidth Line Coding

김대영,강창구,배철,오승협,Kim, Dae-Young,Kang, Chang-Goo,Bae, Cheol,Oh, Seung-Hyeub The Institute of Electronics and Information Engin 1990 전자공학회논문지 Vol.27 No.5

In this paper, some new results on minimum-bandwidth system are presented. First, we state sufficient condition for the existance of a existance of a power spectral null at the zero frequency and Nyquist frequency. Second, eye boundary functions and eyewidth are obtained for minimum-bandwidth systems of arbitrary numbers of transmitted symbol levels. Third, for linear minimum-bandwidth systems usually known as PR systems, we derived formulars for evaluating DSVs and ASVs in terms of the coefficients of the system polynomials and using formulars, we obtain DSVs and ASVs of various PR systems. Last, the relations among DSV, ASV, power spectral nulls, system polynomial nulls, and the minimum-bandwidth property are summarized.