역V형 철골 가새골조의 비탄성거동 및 내진성능향상 방안에 관한 연구

김남훈,이철호,Kim, Nam Hoon,Lee, Cheol Ho 한국강구조학회 2003 韓國鋼構造學會 論文集 Vol.15 No.5

본 논문에서는 중심가새골조 가운데 가정 널리 사용되는 역V형 철골 가새골조의 내진거동을 탄소성 후좌굴해석에 의해 고찰하고, 압축가새의 좌굴이 최초로 발생한 층에 소성화가 집중되는 약층화 현상을 완화할 수 있는 효과적 내진보강 방안을 제시하고자 하였다. 즉 좌굴이 발생한 층에 집중되는 비탄성변형을 건물전체로 재분재하는 기능을 갖는 인장재(tie bar)를 삽입하여 내진성능을 효과적으로 개선할 수 있음을 입증하였다. 아울러 압축가새의 좌굴발생 순서를 감안하여 보강 인장재를 경제적으로 설계할 수 있는 실용적 설계방안을 제시하였다. An effective seismic retrofit scheme for inverted V braced (or chevron type) steel frames was proposed by studying the redistribution of forces in the post-buckling range. The steel frames with chevron bracing are highly prone to soft story response once the compression brace buckles under earthquake loading. This paper shows that the seismic performance of such frames could be significantly improved by supplying tie bars to redistribute the inelastic deformation demand over the height of the building. A practical design method of the retrofit tie bars was also proposed by considering the sequence of buckling occurrence.

OGC 기반의 센서 네트워크 서비스 분석 연구

김남훈,함종완,정회경,Kim, Nam-Hoon,Ham, Jong-Wan,Jung, Hoe-Kyung 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.3

USN(Ubiquitous Sensor Network)은 u-city, u-health 등과 같은 영역에서의 다양한 서비스를 통해 유비쿼터스 사회에서 u-life 실현을 가능하게 하는 핵심 인프라이다. 따라서 u-Life의 핵심 기술인 USN 기술에 대한 국내 표준화 확립을 위한 연구가 필요하다. 현재 USN에 대한 표준 현황은 센서 노드 구현을 위한 기술과 센서 노드들 사이의 효율 적인 통신을 위한 프로토콜 및 기존의 망과 연동을 위한 기술 표준 및 연구가 대부분이다. 그러나, 센서 네트워크와 USN 응용을 위한 이기종 센서 네트워크의 통합관리, 센싱 데이터 관리 및 USN 데이터베이스 구조 정의 등과 같은 응용 및 미들웨어 부분에서의 표준 및 연구는 아직 까지 미약한 수준이다. 이에 본 논문에서는 국내 센서 네트워크 서비스의 표준 개발 및 센서 응용 및 미들웨어 부분에서의 표준화된 플랫폼 기술을 위해 OGC(Open Geospatial Consortium)의 SWE(Sensor Web Enablement)를 구성하는 관련 표준 분석과, 국내 TTA(Telecommunications Technology Association)관련 표준과 상호 연관성을 통하여 OGC 표준의 국내 도입 가능성에 대한 연구를 하였다. USN(Ubiquitous Sensor Network) is a core infrastructure that u-life use to enable the realization in the ubiquitous society through various services of area such as u-city, u-Health. Therefore, we need a research for domestic standards to establish USN technique. Currently, status of USN standards is most standard and research that it is a technology for sensor node implementation and a protocol for energy-efficient communication and interlock with existing network. But, Standard and research for sensor network and integration management of heterogeneous sensor networks for USN application and sensing data management and USN database structure definition such as application and middleware is weak level. In this paper, we researched for standard development of domestic a sensor network and the relevant standard analysis to configure SWE(Sensor Web Enablement) of OGC(Open Geospatial Consortium) for standarded plattform technology. Also we researched that it's a connection between domestic ITA(Telecommunications Technology Association) standards and SWE Standard.

자기세정을 위한 스퍼터링 TiO₂ 박막의 산소 표면처리에 따른 특성

김남훈,박용섭,Kim, Nam-Hoon,Park, Yong Seob 한국전기전자재료학회 2016 전기전자재료학회논문지 Vol.29 No.5

Titanium oxide ($TiO_2$) thin films were fabricated by unbalanced magnetron (UBM) sputtering. The fabricated $TiO_2$ films were treated by oxygen plasma under various RF powers. We investigated the characteristics of oxygen plasma treatment on the surface, structural, and physical properties of $TiO_2$ films prepared at various plasma treatment RF powers. UBM sputtered $TiO_2$ films exhibited higher contact angle value, smooth surface, and amorphous structure. However, the rms surface roughness $TiO_2$ films were rough, and the contact angle value was decreased with the increase of the plasma treatment RF power Also, the hardness value of $TiO_2$ film as physical properties was slightly increased with the increase of the plasma treatment RF power. In the results, the performance of $TiO_2$ films for self cleaning critically depended on the with the plasma treatment RF power.

SM45C와 SCM440의 피삭성 검토에 관한 연구

김남훈,이용성,Kim, Nam-Hoon,Lee, Yung-Sung 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.12

In order to clarify the effects of nonmetallic inclusion contents insteels (SM45C & SCM440) on the tool life, cutting experiment was performed under various cutting conditions. Tool life, cutting force, roughness of machined surface and cutting mechanism are examined on these two kinds of steel. The following conclusions were obtained from the analysis (1) Cutting force of the steels was not affected by chemical component and nonmetallic inclusion. (2) If the rate of amount, Ca/S has a value grater than about 0.2 and addition of less amount of Al, Mn, tool wear of tips decreasesinturning. (3) It is also proved that higher contents of nonmetallic inclusion improve roughness of the surface. (4) Less amount of Ca, higher amount of S, Mn and Al improve the chip breakability.

유도 결합 플라즈마를 이용한 백금 박막의 건식 식각시 가스 첨가 효과

김남훈,김창일,권광호,장의구,Kim, Nam-Hoon,Kim, Chang-Il,Kwon, Kwang-Ho,Chang, Eui-Goo 대한전기학회 1999 전기학회논문지C Vol.48 No.6

The highest etch rate of Pt film was obtained at 10% $Cl_2$/90% Ar gas mixing ratio in our previous investigation. However, the problems such as the etch residues(fence) remained on the pattern sidewall, low selectivity to oxide as mask and low etch slope were presented. In this paper, the etching by additive $O_2$ gas to 10% $Cl_2$/90% Ar gas base was examined. As a result, the fence-free pattern and higher etch slope as about 60$^{\circ}$was observed and the selectivity to oxide increased to 2.4 without decreasing of the etch rate $1500{\AA}$/min. XPS surface analysis proved that a only little $O_2$ gas removes the Pt-CI compounds as residues on the etched surface.

석회화건염(石灰華腱炎)으로 우견관절통증을 호소하는 여환 1례 임상경과 보고

김남훈,장희재,김진환,황덕상,장준복,Kim, Nam-Hoon,Jang, Hee-Jae,Kim, Jin-Hwan,Hwang, Deok-Sang,Jang, Jun-Bock 대한한방체열의학회 2011 대한한방체열의학회지 Vol.9 No.1

Purpose : The purpose of this study is to know the therapeutic effect of herbal-acupuncture on shoulder pain from calcific tendinitis. Methods : The patient who have the calcific tendinitis was treated by herbal-acupunture on 6 acupoints around right shoulder. The shoulder pain and dysfunction was assessed by visual analogue scale(VAS). UCLA Shoulder rating Scale. and SPAI scale. Results : After treatment. all scales showed slightly improvement.. Conclusion : Herbal-acupuncture on shoulder joint was effective in short term study. We need more further study.

In-situ 환원/소결법을 이용한 다공성 니켈 멤브레인 가스필터의 제조 및 평가

김남훈,송한복,최성철,좌용호,Kim, Nam-Hoon,Song, Han-Bok,Choi, Sung-Churl,Choa, Yong-Ho 한국분말야금학회 2009 한국분말재료학회지 (KPMI) Vol.16 No.4

Disk type porous nickel membrane was fabricated by in-situ reduction/sintering process using compacted NiO/PMMA (PMMA; Polymethyl methacrylate) mixture at $800^{\circ}C$ in hydrogen atmosphere. The porosity (49$\sim$58%) of these membrane was investigated as an amount of PMMA additive. The thermal decomposition and reduction behavior of NiO/PMMA were analyzed by TG/DTA in hydrogen atmosphere and the activation energy for the hydrogen reduction of NiO and thermal degradation of PMMA was calculated as 61.1 kJ/mol, evaluated by Kissinger method. Finally, the filtering performance and pressure drop were measured by particle counting system.

마그네트론 스퍼터링법으로 증착시킨 TiC 박막의 물리적, 전기적 특성에서 RF 파워의 영향

김남훈,박용섭,Kim, Nam-Hoon,Park, Yong Seob 한국전기전자재료학회 2014 전기전자재료학회논문지 Vol.27 No.7

TiC thin films were deposited on Si wafer by unbalanced magnetron sputtering (UBMS) system with two targets of graphite and titanium. During the TiC sputtering, the RF power was varied from 100 W to 175 W and the physical and electrical properties of TiC films were investigated. The hardness and rms surface roughness of TiC films were improved with increasing RF power and the maximum hardness about 24 GPa and the minimum rms surface roughness about 1.2 nm were obtained. The resistivity of TiC films was decreased with increasing RF power. Consequently, the physical and electrical properties of TiC film wewe improved with increasing RF power.

OSGi(Open Service Gateway Initiative) 기반의 효율적인 서비스 번들 관리를 위한 SBM(Service Bundle Manager)의 설계 및 구현

김남훈,손민우,신동규,신동일,Kim, Nam-Hoon,Son, Min-Woo,Shin, Dong-Kyoo,Shin, Dong-Il 한국정보처리학회 2006 정보처리학회논문지 C : 정보통신,정보보안 Vol.13 No.6

Since different kinds of home network technologies coexist, seamless connections between different kinds of network protocols are essential for home computing environments. Several kinds of home network middleware have been developed and OSGi(Open Service Gateway Initiative) was initiated mainly for interoperability support with service distribution between various middleware environments. Framework, OSGi service platform, has weaknesses of passive service bundle management, user management and device management. Therefore, this paper resolves passive management parts which are critical weaknesses of OSGi Specification Version 3 and proposes SBM (Service Bundle Manager) to effiently manage various service bundles. Additionally, we verify practical effects of SBM through experiments. 현재 여러 종류의 홈 네트워크(home network) 기술들이 존재하고 있으며, 단일화된 홈 컴퓨팅(home computing) 환경을 위해서는 서로 다른 네트워크 프로토콜간의 연동이 필수적이다. 이를 위하여 여러 종류의 홈 네트워크 미들웨어(home network middleware)가 개발되었고 특히 OSGi (Open Service Gateway Initiative)는 다양한 미들웨어 환경 사이의 서비스 상호연동을 제공하기 위해 제안되었다. 그러나 OSGi의 실행환경인 프레임워크(framework)는 수동적으로 서비스 번들(service bundle), 사용자 및 장치 관리 등을 수행하는 취약점을 가지고 있다. 본 논문에서는 사용자들의 편의성을 위해 수동적으로 관리되는 부분들의 문제점을 개선하고자 한다. 이를 위하여 자동화 서비스와 효율적인 서비스 번들의 관리를 위한 SBM (Service Bundle Manager)의 구조를 제안하고, SBM을 구현하여 SBM의 실효성을 검증하였다.

전악 발치 환자에서 캠퍼그나 트레이를 적용한 즉시의치 수복 증례

김남훈,김종은,오경철,정문규,문홍석,Kim, Nam-Hoon,Kim, Jong-Eun,Oh, Kyung Chul,Chung, Moon-Kyu,Moon, Hong-Seok 대한치과보철학회 2017 대한치과보철학회지 Vol.55 No.3

An immediate complete denture is considered as restoration for lost natural teeth, which is fabricated following the extraction of the remaining teeth. Current esthetics and function can be retained by using immediate denture without edentulous period. However, the major disadvantages of immediate denture relate to the difficulties associated with taking accurate definitive impression and predicting the results of immediate denture. In this case report, the Campagna tray technique was used to take the final impression in a 49-year-old male patient presented with all remaining teeth diagnosed as hopeless teeth. Surgical templates were used for alveoloplasty after extraction. The immediate complete dentures were then delivered. The clinical assessments of immediate dentures showed good esthetic and functional outcomes. The patient showed high level of satisfaction. 잔존 자연치의 발치가 필요한 환자에서 즉시의치의 제작을 고려해 볼 수 있다. 즉시의치를 장착함으로써 환자가 무치악으로 지내는 기간 없이 심미 및 기능을 회복해줄 수 있는 장점이 있지만 인상 채득이 어렵다는 점, 장착 후의 결과를 예측하기 어렵다는 단점이 있다. 본 증례에서는 잔존 자연치를 모두 발치해야 하는 49세 남환에서 캠퍼그나 트레이를 이용하여 최종 인상을 채득하고 수술용 형판을 이용하여 발치 및 치조골 성형술을 시행한 후, 즉시의치를 제작 및 장착하여 심미적, 기능적으로 만족할 만한 치료 결과를 보였기에 이를 보고하고자 한다.