http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강희석,이한수,정흥석,안도희,손순환,정양근,송명재 ( Hee Suk Kang,Han Soo Lee,Hongsuk Chung,Do Hee Ahn,Soon Hwan Son,Yang Geun Chung,Myung Jae Song ) 한국공업화학회 1996 공업화학 Vol.7 No.4
중수형 발전소에서 삼중수소 제거 공정에 이용되는 소수성 고분자촉매의 담체인 스티렌-디비닐벤젠 공중합체의 제조 특성을 실험하였다. 스티렌-디비닐벤젠 고분자담체의 제조시 담체의 표면 특성에 대한 용매의 영향을 고찰하기 위하여 일정한 용매계에서 용매비를 변화시켜 solvating power 값을 구하였다. 거시기공 형태의 담체가 제조되기 위한 solvating power는 가교도가 20%일 때 3 이상, 가교도가 40%일 때는 1 이상의 값이 필요하였으며 약 40℃에서 2시간 이상 용액의 안정이 필요하였다. 또한 후처리 방법은 담체를 건조시키기 전에 용매를 제거하는 방법이 가장 우수한 기공 특성을 나타내었다. 담체의 입자 크기는 교반속도 및 계면활성제의 농도가 낮을수록 더 크게 생성됨을 알 수 있었다. This study represents the synthetic characteristics of styrene-DVB copolymer which is used as a catalyst support for the removal of tritium in CANDU. To evaluate the effect of solvent on the styrene-DVB polymeric support, the solvating power dependent on various kinds and composition of solvents was calculated. In order to synthesize the macroreticular type polymer bead, the following conditions are needed; solvating power should be higher than 1 for 20% of crosslinkage and higher than 3 for 40% of crosslinkage. Stabilization of organic monomers at about 40℃ for more than 2 hours is prerequisite. Removal of solvent prior to drying is preferred for the post-treatment of the bead. The polymer particle size was increased by lowering concentration of surfactant and stirring speed.
강희석,전인,금동권,최용호,이한수,이창우,Kang, H.S.,Jun, I.,Keum, D.K.,Choi, Y.H.,Lee, H.S.,Lee, C.W. 대한방사선방어학회 2005 방사선방어학회지 Vol.30 No.4
원자력발전소의 가상사고 시나리오를 도입하여 영광 원전 주변 지역에서 가상사고 시에 발생하는 핵종 방출 후 토양 또는 농작물에서 시간 경과에 따라 변화하는 핵종 농도분포를 GIS와 연계하여 표현하고자 하였다. 표현 대상 및 방출핵종은 영광 주변지역의 토양과 $^{137}Cs$로 정하였다. 영광원전 중심 반경 30km 이내 지역을 1km 거리 단위로 총 480개의 16방위 cell로 나누어 준비한 다음, ECOREA-II 코드를 통해 계산된 $^{137}Cs$의 침적량 자료를 ArcView의 polygon cell에 대한 속성 자료에 각각의 cell id와 일치시켜 연결 작업을 수행하였다. 원전에서의 핵종 방출 후 시간이 경과됨에 따라 낮아지는 $^{137}Cs$ 농도값을 일관성있는 색상 변화로 나타내기 위해 ArcView의 color lamp에 대한 RGB 값을 조절하였다. 이 방법을 통하여 $^{137}Cs$의 침적 후 영광주변 반경 30km 지역에서 시간에 따라 변하는 $^{137}Cs$ 농도분포를 쉽게 구분할 수 있도록 나타낼 수 있었다. The distribution of radionuclides in soil and plants were calculated, assuming an accidental release of radionuclides from Yeonggwang Nuclear Power Plant. The results which show the concentration change with time and regions were displayed by GIS. GIS Included the commercial program, ArcView(ESRI), and a basic digital map of 1:5000 scale for 30km by 30km area around Yeonggwang Nuclear Power Plant. The target material was $^{137}Cs$ in soil around Yeonggwang area. Given denosited $^{137}Cs$ concentrations, ECOREA-II code computed the $^{137}Cs$ concentration of the soil and the plant in the area divided by 16 azimuth, 480 unit cells in total in which the concentrations also varied with time. The results were introduced into the attributed data of previously designed polygon cells in ArcView. In order to display the concentration change with time by monotonic color, the RGB value for ArcView color lamp was controlled. This display is useful for the public to understand the concentration change of radionuclide around Yeonggwang area definitely.
강희석,금동권,이한수,전인,최용호,이창우,Kang Hee Suk,Keum Dong-kwon,Lee Hansoo,In Jun,Choi Yong Ho,Lee Chang Woo 한국방사성폐기물학회 2005 방사성폐기물학회지 Vol.3 No.4
This paper describes a compartment dynamic model for evaluating the contamination level of kritium in agricultural plants exposed by accidentally released tritium. The present model uses a time-dependent growth equation of plant so that it can predict the effect of growth stage of plant during the exposure time. The model including atmosphere, soil and plant compartments is described by a set of nonlinear ordinary differential equations, and is able to predict time-dependent concentrations of tritium in the compartments. To validate the model, a series of exposure experiments of HTO vapor on Chinese cabbage and radish was carried out at the different growth stage of each plant. At the end of exposure, the tissue free water(TFWT) and the organically bound tritium(OBT) were measured. The measured concentrations were agreed well with model predictions.
ArcView를 이용한 고리 원전 주변 육상생태계 평가를 위한 GIS 구축
강희석,최희주,유동한,금동권,최용호,임광묵,이한수,이창우,Kang, H.S.,Choi, H.J.,Yu, D.H.,Keum, D.K.,Choi, Y.H.,Lim, K.M.,Lee, H.S.,Lee, C.W. 대한방사선방어학회 2005 방사선방어학회지 Vol.30 No.3
고리 원전 주변 지역에서 가상사고 시에 발생하는 핵종 방출 후 토양 또는 농작물에서 시간 경과에 따라 변화하는 핵종 농도분포를 도식적으로 표현하기 위한 GIS를 구축하였다. 이를 위해 ESRI 사의 GIS 구축용 상용 프로그램인 ArcView를 도입하였다. 미리 고리원전 주변의 북서방향 $20km{\times}20km$ 구역에 대한 1:5000 축적의 지도 데이터를 구축하였다. 표현 대상 농작물 및 방출핵종은 주민의 주식인 쌀과 $^{131}I$로 정하였다. 총 100개의 cell에서 $^{131}I$의 침적량으로부터 토양 및 농작물 부분에 대한 $^{131}I$의 시간에 따른 양을 ECOREA-II코드를 통해 계산하였다. 계산결과를 ArcView에서 미리 준비된 polygon cell의 속성 자료에 각각의 cell id와 일치시켜 데이터 병합(join) 작업을 수행하였다. 시간이 경과됨에 따라 낮아지는 $^{131}I$ 농도값을 일관성있는 색상 변화로 나타내기 위해 ArcView의 color lamp에 대한 RGB 값을 조절하였다. 이 방법을 이용하여 고리주변의 북서방향 $10km{\times}10km$ 지역에서 $^{131}I$의 침적 후 쌀에서 시간에 따라 변하는 $^{131}I$ 농도분포를 일관성있는 색상 변화로 쉽게 구분이 되도록 나타낼 수 있었다. Geographical Information System(GIS) was established to display the calculation results which show the concentration change with time and regions in case of an accidental release of radionuclides from Kori Nuclear Power Plants. GIS included the commercial program, ArcView(ESRI), and a basic digital map of 1:5000 scale lot 20km by 20km around Kori area. The object for the presentation was $^{131}I$ concentration in rice which is one of staple foodstuffs. Provided by deposited $^{131}I$ concentrations, ECOREA-II code computed the $^{131}I$ concentration of the soil and the plant in the area divided by In unit cells in total, in which the concentrations also varied with time. The results were introduced into the attributed data of previously designed polygon cells in ArcView. In order to display the concentration change with time by monotonic color, the RGB value for ArcView color lamp was controlled. This display definitely helped the concentration change around Kori area be acceptable to public.
광음향분광법을 이용한 CO 산화반응에서의 $Gd_{1-x}Sr_xCoO_{3-y}$ 촉매효과 연구
강희석,엄가원,황진수,여철현,최중길,Kang Hee-Seok,Oum Ka-Won,Hwang Jin-Soo,Yo Chul-Hyun,Choi Joong-Gill 대한화학회 1993 대한화학회지 Vol.37 No.1
An application of the optoacoustic detection method to investigate the catalytic effect of a perovskite, $Gd_{1-x}Sr_xCoO_{3-y}$ (x = 0.00, 0.25, 0.50, 0.75) system, in the oxidation reaction of CO is described. The optoacoustic signals Of $CO_2$ produced from the oxidation reaction were measured for differing x values in $Gd_{1-x}Sr_xCoO_{3-y}$. By monitoring optoacoustic signals with respect to the time, the concentration ratios of CO and $O_2$, and the temperature, the kinetic information on the catalytic properties of the perovskite for CO oxidation reaction can be obtained. The effect of Sr substitution in $Gd_{1-x}Sr_xCoO_{3-y}$ has been found to show the maximum catalytic effect at x = 0.25 and the substantial increase in catalytic activity at temperatures above 200$^{\circ}C$. It demonstrates that the optoacoustic detection method allows the investigation of the integrated catalytic effect not only for the oxidation reaction of CO, but also for many reactions, in general, by continuously and directly detecting the species associated with the reactions. CO 산화반응의 촉매로 사용되는 페로브스카이트 금속산화물인 $Gd_{1-x}Sr_xCoO_{3-y}$ (x = 0.00, 0.25, 0.50, 0.75) 계의 촉매효과를 조사하기 위하여 광음향 분광법을 사용하였다. 산화반응으로부터 생성된 $CO_2$의 광음향신호를 $Gd_{1-x}Sr_xCoO_{3-y}$에서 각각의 x값에 대하여 반응시간, 반응기체인 CO와 $O_2$의 농도비, 그리고 온도에 따라 측정함으로써 CO 산화반응의 $Gd_{1-x}Sr_xCoO_{3-y}$ 촉매 특성에 대한 정보를 얻었다. Gd1-xSrxCoO3-y에서 Gd가 Sr로 치환됨에 따른 촉매효과는 x=0.25일 때 최대로 나타났으며 반응 온도에 대하여는 200$^{\circ}C$ 이상에서 급격히 증가하는 것을 알 수 있었다. $CO_2$ 레이저 광음향분광법은 반응에 대한 연속적인 측정을 가능케 함으로써 CO 산화반응의 촉매효과 연구뿐만 아니라 일반적인 반응속도 연구에도 응용할 수 있는 방법임이 확인되었다.
R 과 분석 알고리즘을 활용한 기업의 성장성 예측에 관한 연구
강희석 ( Hui-seok Kang ),김경수 ( Kyung-su Kim ),류지승 ( Ji-seung Ryu ),이가연 ( Ga-yeon Lee ),이민정 ( Min-jung Lee ) 한국정보처리학회 2017 한국정보처리학회 학술대회논문집 Vol.24 No.2
기업의 성장성과 기업 주식가치를 매출, 매출원가, 영업이익율 등의 정형데이터와 경제, 경영 관련 뉴스 등 비정형 데이터를 토대로 다양한 알고리즘을 활용해 분석하고, 그 결과의 유의성을 검증한다. 주성분회귀분석, 인공신경망, 나이브 베이지안 분류자, 긍/부정 사전분석 모델을 통해 분석된 결과를 검토하여 각 분석모델 별성능을 확인하고, 기업 성장성 예측을 위해 활용 가능한 모델과 필요한 데이터를 제시한다.