국가 주도 성평등교육의 체계적 운영 방안과 관련법 제정 가능성의 탐색

최윤정,김효경,장명선 이화여자대학교 젠더법학연구소 2021 이화젠더법학 Vol.13 No.2

본 연구에서는 국가 주도 성평등교육의 구조적 한계와 각각의 쟁점을 확인하는 한편, 성평등 교육의 한 단계 도약을 위해 다양한 개선방안 및 관련 정책을 지원할 수 있는 관련법의 제정 가능성을 탐색하였다. 이를 위해 본 연구에서는 성평등교육과 관련된 학계 및 현장의 전문가 20명을 대상으로 네 차례에 걸친 라운드테이블을 진행하였으며, 이를 통해 국가 주도 성평등교육의 추진현황과 운영상의 한계, 다양한 쟁점 사항들을 확인하였으며, 이를 극복하기 위한 개선 과제들과 방향성에 대한 의견을 청취하였다. 이상의 분석결과를 바탕으로 본 연구에서는 성평등교육법의 체계적 운영을 위한 중장기적 개선 과제를 도출하였으며, 그 방안으로서 관련법의 제정 가능성과 한계를 검토, 제안하였다. In this study, the structural limitations of state-led gender equality education and each issue were identified. In addition, the possibility of enacting related laws to support various improvement measures and related policies was explored for the leap forward in gender equality education. To achieve this research objective, this study conducted four rounds of roundtable for 20 experts from academia and sites related to gender equality education. In the process, we identified the current status of state-led gender equality education, limitations in operation, and various issues, and heard opinions on improvement tasks and directions to overcome them. Based on the above analysis results, this study derived mid- to long-term improvement tasks for systematic operation of gender equality education and reviewed and proposed the possibilities and limitations of enacting Gender Equality Education Act.

자동차 허브 내·외경 측정 시스템 개발

윤규택,이동주,최만용,박해원,박정학 한국공작기계학회 2002 한국공작기계학회 춘계학술대회논문집 Vol.2002 No.-

An automobile hub is composed of a hollow cylindrical part with inner and outer diameters. These hub diameters must be precise, as any irregularities in them (diameters) can influence/degrade the motion of an automobile with this problem. Highly accurate and reliable hub inner and outer diameters measurement systems are therefore required for inspection of the diameters. In this research, an automobile hub inner and outer diameters measurement system has been developed and tested. The system consists of measuring heads with LVDT sensors, and associated software for automatic measurement and calibration of the diameters and the sensors respectively. The system has been evaluated in comparison with an existing measurement system, and the following outcomes have been achieved; ·Improved and guaranteed quality and reliability ·Increased productivity and cost reduction These results prove the system developed in this research to be suitable for automobile hub inspection.

부산시 고등학생들의 환경에 대한 인식정도와 영향요인 분석

최인영,윤성효,고정선 부산대학교 사범대학 과학교육연구소 2004 科學敎育硏究報 Vol.31 No.-

The purpose of this study was to identify the degree of recognition of the high school students about environmental and influential factors on it, selecting two regular schools and three vocational schools among the high schools in Busan area, questionnairing one class in the 10th, 11th, 12th grades of each school and analyzing the result. The result of analyzing the degree of knowledge, practice and recognition of seriousness concerning environment according to grade and gender is that the significant difference has been found in the degree of practice. The result of analyzing them according to maternal academic background is that the significant difference has been found in the degree of knowledge and a living standard and the style of housing have no effect on the environmental education, In the survey according to family style, it is shown that the students 'who live with their parents' recognize the seriousness of environment more. In the survey according to the experience of having the subject 'environment' in their school curriculum or not, it is shown that the significant difference has been found in the degree of knowledge. As the source of information on environment, mass media such as TV, magazines and newspapers have a great impact on the students. As the significant difference has been found in the degree of knowledge, practice, the recognition of seriousness from the viewpoint of the analysis on the survey according to the degree of the recognition on the necessity of the environmental preservation, it is shown that the more the students feel the necessity of environmental preservation, the higher the degree of knowledge, practice and recognition of seriousness on environment becomes, In the survey according to the kind of school, the significant difference has been found in the degree of knowledge, In the survey according to the degree of maternal concern on environment it is shown that the more concerns the mothers have, the more the students put what they learn into practice, In the survey according to the kinds of school, the significant difference has been found in the degree of knowledge. As the result of multiple regression analysis is summarized as below. 1. The variables influencing the environmental knowledge are the experience of having the class, 'environment', the recognition of the necessity of the environmental preservation and maternal academic background. 2. The elements influencing the degree of recognition of seriousness about environmental contamination are gender, the experience of having a class, 'environment' or not and the necessity of the environmental education. 3. The elements influencing the degree of practice are grade, information on environment, and maternal concern.

적외선열화상장치를 이용한 Buchanan plugger 표면의 온도상승 분석

최성아,김선호,황윤찬,윤창,오병주,최보영,정우남,정선와,황인남,오원만 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.4

This study was performed to evaluate the temperature rise on various position of the Buchanan plugger, the peak temperature of plugger's type and the temperature change by its touching time of heat control spring. The heat carrier system 'System B' (Model 1005. Analytic Technologies, USA) and the Buchanan's pluggers of F, FM, M and ML sizes are used for this study. The temperature was set to 200℃ which Dr. Buchanan's "continuous wave of condensation" technique recommended on digital display and the power level on it was set to 10. In order to apply heat on the Buchanan's pluggers, the heat control spring was touched for 1, 2, 3, 4 and 5 seconds respectively. The temperature rise on the surface of the pluggers were measured at 0.5 mm intervals from tip to 20 mm length of shank using the infraed thermography (Radiation Thermometer-IR temper, NEC San-ei Instruments, Ltd, Japan) and TH31-702 Data capture software program (NEC San-ei Instruments, Ltd, Japan). Data were analyzed using a one way ANOVA followed by Duncan's multiple range test and linear regression test. The results as follows. 1. The position at which temperature peaked was approximately at 0.5 mm to 1.5 mm far from the tip of Buchanan's pluggers (p<0.001). The temperature was constantly decreased toward the shank from the tip of it(p<0.001). 2. When the pluggers were heated over 5 seconds, the peak temperature by time of measurement revealed from 253.3±10.5℃ to 192.1±3.3℃ in a touch for 1 sec, from 218.6±5.0℃ to 179.5±4.2℃ in a touch for 2 sec, from 197.5±3.0℃ to 167.6±3.7℃ in a touch for 3 sec, from 183.7±2.5℃ to 159.8±3.6℃ in a touch for 4 sec and from 164.9±2.0℃ to 158.4±1.8℃ in a touch for 5 sec. A touch for 1 sec showed the highest peak temperature, followed by, in descending order, 2 sec, 3 sec, 4 sec. A touch for 5 sec showed the lowest peak temperature (p<0.001). 3. A each type of pluggers showed different peak temperatures. The peak temperature was the highest in F type and followed by, in descending order, M type, ML type. FM type revealed the lowest peak temerature (p<0.001). The results of this study indicated that pluggers are designed to concentrate heat at around its tip, its actual temperature dose not correlate well with the temperature which Buchanan's "continuous wave of condensation" technique recommended, and finally a quick touch of heat control spring for 1 sec reveals the highest temperature rise.

수리된 복합레진 수복물의 전달결합강도 연구

최수영,정선와,황윤찬,김선호,윤창,오원만,황인남 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.6

This study was performed to evaluate the interfacial shear bond strength of base (direct and indirect) and repair composites with aging and surface treatment methods. Direct composites resin specimens (Charisma®, Heraeus Kulzer, Germany) were aged for 5 min, 1 hour, 24 hours, and 1 week in 37℃ distilled water before surface treatment, and then divided into five groups: Group 1, grinding; Group 2, grinding and application of bonding agent; Group 3, grinding, etching with 37% phosphoric acid for 30sec, and application of bonding agent; Group 4, grinding, etching with 37% phosphoric acid for 30sec, silane treatment, and application of bonding agent; Group 5, grinding, etching with 4% hydrofluoric acid for 30sec, silane treatment, and application of bonding agent. Indirect composite resin specimens (Artglass®, Heraeus Kulzer, Germany) were aged for 1 week in 37℃ distilled water and divided into seven groups: Group 1 - Group 5, equal to Charisma specimens; Group 6, grinding, etching 37% phosphoric acid for 60sec, silane treatment, and application of bonding agent; Group 7, grinding, etching with 4% hydrofluoric acid for 60 sec, silane treatment, and application of bonding agent. The repair material(Charisma®) was then added on the center of the surface (5mm in diameter, 5mm in height). The shear bond strength was tested and the data was analyzed using one-way ANOVA and the Student-Newman-Keuls test. The following conclusions were drawn. 1. The shear bond strength of Charisma® specimens aged for 1 hour was significantly higher in Group 2 and Group 5 than in Group 1 (p<0.05), and that of Charisma® specimens aged for 1 week was significantly higher in Group 3 and Group 5 than in Group 1 (p<0.05). No significant difference was found in the bond strength of specimens aged for 5 min and 24 hours. 2. In Group 2 of the Charisma® specimens, there was significant difference between the bond strength of 24 hours and that of 1 week (p<0.05). 3. In Group 4 of the Charisma® specimens, the shear bond strength of specimens aged for 24 hours was significantly higher than the others(p<0.05). 4. There was no significant diiference between the shear bond strength of the Artglass® specimens. 5. Most of the Charisma® specimens showed cohesive fractures. Artglass® specimens that were etched with acid(phosphoric or hydrofluoric) for 30 sec showed more cohesive fractures.

Dopamine Transporter Gene의 다형성과 알코올 의존증의 관련

최윤정,방승규,김정진,도규영,백인호 大韓神經精神醫學會 1999 신경정신의학 Vol.38 No.4

연구목적 : 도파민계는 알코올 추구와 같은 알코올 의존증과 관련된 행동에 중요한 역할을 한다. Dopamine transporter(DAT1)는 신경연접부위에서 도파민 재흡수에 관여하여 도파민 활성을 종결시키는 물질로 알려져 있다. 그러므로, DAT1 유전자가 알코올 의존증에 대한 감수성에 영향을 줄 수 있다. DAT1 유전자는 다형성을 보이는 반복된 40개의 염기서열(VNTR)을 갖는다. 본 연구에서는 DAT1 유전자 다형성과 알코올 의존증 및 알코올 의존증의 임상변인과의 관련성에 대하여 알아보았다. 방 법 : 알코올 의존증 환자 94명과 정상대조군 113명을 대상으로 말초혈액을 채취하여 분리된 DNA의 DAT1 유전자를 DNA 중합효소연쇄반응으로 증폭하였다. 증폭된 산물을 15% polyacrylamide gel에서 전기영동하여 나타나는 띠의 크기에 따라 유전자형을 구분하였다. 자료의 통계적 처리는 Fisher's exact test, oneway ANOVA를 사용하였다. 결 과 : 환자군과 정상대조군의 유전자형은 모두 Hardy-Weinberg equilibrium의 예상치와 유의한 차이가 없었다. 대립유전자는 7 repeats, 9 repeats, 10 repeats, 11 repeats의 4가지 종류로 구분되었고, 유전자형은 7/7 repeats, 7/10 repeats, 9/10 repeats, 10/10 repeats, 10/11 repeats의 5가지 형태를 보였다. 환자군과 대조군간에 DAT1 유전자형 및 대립유전자 빈도는 유의한 차이가 없었고, DAT1 유전자형에 따른 음주 시작 연령, 알코올 의존증의 발병 연령 및 잠복기간에서도 차이가 없었다. 알코올 의존증의 가족력이 있는 환자군과 없는 환자군은 DAT1 유전자형의 빈도에서 차이가 있는 경향을 보였고(χ²=6.912, p=0.081), DAT1 대립유전자의 빈도에서도 유의한 차이가 있었으며(χ²=10.193, p=0.008), lambda값은 0.046였다. 결 론 : DAT1 유전자의 다형성이 알코올 의존증의 유전적 소인이 될 가능성은 적은 것으로 보이나, 알코올 의존증의 가족내 유전과는 관련있을 것으로 시사된다. Objectives : Alcoholism is known to be a heritable disease. It has been hypothesized that dopaminergic systems play an important heritable role in human behavor related to alcohol dependence, such as alcohol seeking. Therefore, genes involved in this pathway, including dopamine transporter(DAT1), which is responsible for taking released dopamine back up into presynaptic terminals and terminating dopaminergic activity, are potential candidate that may affect susceptibility to alcoholism. Analysis of a 40-base pair(bp) repeat(VNTR) in the 3' untranslated region of the DAT1 gene revealed variable number of the repeat ranging from 3 to 11 copies. Therefore, in the present study, we examined the association between alcoholism and VNTR polymorphism of DAT1. Methods : Genomic DNA analysis with polymerase chain reaction(PCR) was used to identify the presence of a VNTR polymorphism. It was carried out within a group of 94 alcoholic patients and 113 normal controls. Results : 1) There were no significant differences in allelic or genotype frequencies between the group of alcoholic patients and controls. 2) There were no significant differences in the first drinking age, onset age and latency of alcoholism according to DAT1 genotypes. 3) There was a significant difference in allelic frequencies between alcoholics with family history and those without family history. Conclusions : These results suggested that VNTR polymorphism of DAT1 is unlikely to be a factor in the genetic etiology of alcoholism, but might be related to familial transmission of alcoholism.

수목추출물의 생리활성에 관한 연구(Ⅹ) : 헛개나무 목부의 항균활성 물질 Antifungal Compounds of Hovenia dulcis

최윤정,이학주,이성숙,최돈하 한국목재공학회 2003 목재공학 Vol.31 No.1

항균활성이 우수한 혓개나무 목부 에탄올 조추출물로부터 7종의 화합물을 단리하였으며, 기기분석 결과 flavonoid인 5-hydroxy-7methoxyflavone를 비롯하여 5,7-dihydroxyflavone (chrysin). 5,7-dihydroxyfla-vanone(pinocembrin), 3,5,7-trihydroxyflavanone (pinobanksin), 3,4',5,7-tetrahydroxyflavanone (aroma-dendrin)과 stilbenoid인 3-hydroxy-5-methoxystilbene과 3,5-dihydroxystilbene (pinosylvin)으로 각각 동정되었다. 이들 단리물질에 대한 항균활성을 조사한 결과 stilbenoid인 3-hydroxy-5-methoxystilbene이 공시균주의 생장을 완전히 저해하여 단리물질 중 활성이 가장 높은 것으로 나타났다. 그 다음이 pinocembrin과 pinosylvin으로 Cryphonectria parasitica, Trametes versicolor, Tyromyces palustris 그리고 Trichoderma viride에 대한 높은 균사생장억제율을 나타내어 활성이 우수한 것으로 나타났다. 그러나, flavonoid인 pinobanksin, 5- hydroxy-7-methoxyflavone, chrysin, 그리고 aromadendrin은 항균활성이 낮은 것으로 나타났다. 이상의 결과, 헛개나무 목부 에탄올 조추출물의 높은 항균활성은 3-hydroxy-5-methoxystilbene과 pinocembrin, 그리고 pinosylvin에서 유래된 것으로 사료되었다. Antimicrobial activities of plant extractives were investigated to develop a natural fungicide. Two stilbenoids and five flavonoids were isolated from wood extractives of Hovenia dulcis (Rhamnaceae) which had been selected due to its high antifungal activity among the tested species. The chemical structures of isolated compounds were determinded as : 5-hydroxy-7-methoxyflavone, 5,7-dihydroxy-flavone (chrysin), 5,7-dihydroxyflavanone (pinocembrin), 3,5,7-trihydroxyflavanone (pinobanksin), 3,4',5,7-tetrahydroxyflavanone (aromadendrin), 3-hydroxy-5-methoxystilbene and 3,5-dihydroxystilbene (pinosylvin) on the basis of Mass and NMR spectroscopic data. According to the results of antifungal test, 3-hydroxy-5-methoxystilbene was evaluated as the strongest antifungal compound among the tested compounds and next were pinocembrin and pinosylvin, but those also had high hyphal growth inhibition activities against C. parasitica, T. versicolor, T. palustris and T. viride. However, pinobanksin, 5-Hydroxy-7-methoxyflavone, chrysin and aromadendrin showed very low antifungal activity. In this regard, it could inferred that high antifungal activity of wood extractives of H. dulcis were derived from 3-hydroxy-5-methoxystilbene, pinocembrin and pinosylvin, respectively.

예비수학교사의 신념에 따른 교수학적 내용지식(PCK)과의 관련성에 관한 연구

고상숙,김은호,문정윤,배지은,정대진 이화여자대학교 교과교육연구소 2011 교과교육학연구 Vol.15 No.4

This study investigated the relationship between PCK (Pedagogical Content Knowledge) and pre-service mathematics teachers' mathematical beliefs, and the effects of PCK on their teaching. The data were collected through pre & post interviews, a questionnaire, and classroom observations of six pre-service mathematics teachers who were taking their field practica in their senior year. The results indicate that the pre-service mathematics teachers' differing beliefs about the nature of mathematics affected their PCK. This study showed the relationship between their beliefs about teaching and the learning of mathematics and PCK. It is recommended that more opportunities for PCK development, as well as for modifications in of their beliefs have to be offered in education programs for pre-service mathematics teachers. 본 연구의 목적은 예비수학교사들의 수학적 신념과 수업에서 발현된 교수학적 내용지식(PCK)의 특징을 알아보고, 이를 통해 수학적 신념에 따른 PCK의 관련성에 대해 분석하는 것이다. 이 연구는 교육실습 중인 예비수학교사 6명을 대상으로 실시한 PCK 설문지, 인터뷰 자료, 수업관찰 자료를 분석하는 질적 연구 방법을 토대로 하였다. 연구결과, 예비수학교사들의 다양한 수학 본질에 대한 신념은 PCK에 서로 다른 영향을 주었으며, 수학 교수-학습에 대한 신념과 PCK사이에는 밀접한 관련성이 있음을 볼 수 있었다. 따라서 신념과 교수학적 내용지식(PCK)을 함께 발달시킬 수 있는 예비교사 연수 및 지원 프로그램의 확충이 필요하다.

초·중·고등학교 학생, 학부모, 일반교사의 보건교육 요구

윤순녕,김영임,최정명,조희순,김영희,박영남,오경순,이분옥,조선녀,조소영,한선희,하영미 韓國學校保健學會 2004 韓國學校保健學會誌 Vol.17 No.2

Purpose : The purpose of this study was to identify needs of health education of the students, parents, general teachers, and health teacher of the elementary, middle, and high schools. Method : 279 schools of elementary, middle, and high school were sampled nonproportionally during the period from June 28 to July 26, 2004 . The data were collected by the questionnaire from 1,888 students, 1,876 parents, 1,695 general teachers, 279 health teachers. A frequency, % and χ2-test were used to analysis by SAS program. Result : 1. It showed that 98.1% of elementary school students, 92.3% of middle school students, 89.6% of high school students answered that they need health education. The most of students, parents, and general teachers had high interests in health education. 2. In the case of students, main causes of needs of health education was 'to prevent diseases or accidents''. But parents answered that it was 'to build up a healthier behavior'. General teachers answered that it was 'more effective systematic and continuous health education'. 3. Over 80% of students, parents, and general teachers about the question of who qualified person is to teach health education as a regular class responded that health teacher is available. Especially 93% of elementary school students answered like that. 4. The most of students, parents, and general teachers answered that health education in the classroom is favorable 1 to 2 hours per week. Conclusion : As results of the study , the majority of students, parents, general teachers agreed needs of health education. Therefore, on the basis of this study, systematic and continuous health education is necessary. Additionally the establishment of independent health subject is required certainly.

정밀부품 및 기기에 대한 환경시험기술

최만용,박정학,윤규택 한국비파괴검사학회 2001 한국비파괴검사학회지 Vol.21 No.6

정밀부품이나 기기는 개발과정이나 완료단계에서 부적절한 설계에 의하여 발생할지도 모르는 잠재적인 결함을 방지하기 위하여 시험평가를 실시하게 된다. 본 논문에서는 신뢰성 기술 분야의 기초가 되는 환경시험기술을 소개 하였으며 엔코더, 교통신호제어기, 계측기기 및 위성항법 수신기 등 제품단위의 대상품에 대한 시험조건 및 방법 등을 기술하고 시험사례를 보고하였다. 이러한 사례를 통하여 제품의 신뢰성 향상을 위한 복합환경시험의 중요성을 강조하였고 최근 환경시험기술에 대한 인식이 날로 증대되면서 시험기술자 양성, 지그설계기술 그리고 고장해석 및 대책기술의 확보가 매우 필요함을 제안하였다. Precision parts and instruments are tested to evaluate performance in development-process and product-step to prement a potential defect due to a failure design. In this paper, Environmental test technology, which is the basis of reliability analysis, is introduced with examples of test criterion, test method for products, encoder and traffic signal controller, and measuring instruments. Recently, as the importance of the environmental test technology is recognized, It is proposed that tranining of test technician and technology of jig design and failure analysis are very essential.