Transceiver Optimization for the Multi-Antenna Downlink in MIMO Cognitive System

( Wentao Zhu ),( Jingbo Yang ),( Tingting Jia ),( Xu Liu ) 한국인터넷정보학회 2015 KSII Transactions on Internet and Information Syst Vol.9 No.12

Transceiver optimization in multiple input multiple output (MIMO) cognitive systems is studied in this paper. The joint transceiver beamformer design is introduced to minimize the transmit power at secondary base station (SBS) while simultaneously controlling the interference to primary users (PUs) and satisfying the secondary users (SUs) signal-to-interference-plus-noise ratio (SINR) based on the convex optimization method. Due to the limited cooperation between SBS and PUs, the channel state information (CSI) usually cannot be obtained perfectly at the SBS in cognitive system. In this study, both perfect and imperfect CSI scenarios are considered in the beamformer design, and the proposed method is robust to CSI error. Numerical results validate the effectiveness of the proposed algorithm.

Isolation and characterization of tick-borne Roseomonas haemaphysalidis sp. nov. and rodent-borne Roseomonas marmotae sp. nov.

Zhu Wentao,Zhou Juan,Lu Shan,Yang Jing,Lai Xin-He,Jin Dong,Pu Ji,Huang Yuyuan,Liu Liyun,Li Zhenjun,Xu Jianguo 한국미생물학회 2022 The journal of microbiology Vol.60 No.2

Four novel Gram-negative, mesophilic, aerobic, motile, and cocci-shaped strains were isolated from tick samples (strains 546T and 573) and respiratory tracts of marmots (strains 1318T and 1311). The 16S rRNA gene sequencing revealed that strains 546T and 573 were 97.8% identical to Roseomonas wenyumeiae Z23T, whereas strains 1311 and 1318T were 98.3% identical to Roseomonas ludipueritiae DSM 14915T. In addition, a 98.0% identity was observed between strains 546T and 1318T. Phylogenetic and phylogenomic analyses revealed that strains 546T and 573 clustered with R. wenyumeiae Z23T, whereas strains 1311 and 1318T grouped with R. ludipueritiae DSM 14915T. The average nucleotide identity between our isolates and members of the genus Roseomonas was below 95%. The genomic G+C content of strains 546T and 1318T was 70.9% and 69.3%, respectively. Diphosphatidylglycerol (DPG) and phosphatidylethanolamine (PE) were the major polar lipids, with Q-10 as the predominant respiratory quinone. According to all genotypic, phenotypic, phylogenetic, and phylogenomic analyses, the four strains represent two novel species of the genus Roseomonas, for which the names Roseomonas haemaphysalidis sp. nov. and Roseomonas marmotae sp. nov. are proposed, with 546T (= GDMCC 1.1780T = JCM 34187T) and 1318T (= GDMCC 1.1781T = JCM 34188T) as type strains, respectively.

Adsorption of hexavalent chromium from aqueous solution by activated carbon prepared from longan seed: Kinetics, equilibrium and thermodynamics

Jinbei Yang,Meiqiong Yu,Wentao Chen 한국공업화학회 2015 Journal of Industrial and Engineering Chemistry Vol.21 No.1

Activated carbonwas prepared from longan seed by chemical activation with sodium hydroxide (NaOH). The longan seed activated carbon (LSAC) was characterized for surface area and pore volume and used asan adsorbent for Cr(VI) removal from aqueous solutions in batch adsorption experiments. The effect ofshaking speed, pH, LSAC dosage and temperature were studied. The results show that LSAC has a highsurface area (1511.8 m2/g) and porous structure, which is favorable for the adsorption. The effect ofexternal diffusion is eliminated at 170 rpm, the best pH value is 3.0 and the removal percentage of Cr(VI)increases with the increase of the LSAC dosage. The adsorption process can be well described by thepseudo second-order kinetic model and the activation energy is 84.4 kJ/mol. The adsorption isothermsdata of Cr(VI) on LSAC obtained at 298.2, 308.2, 313.2 and 318.2 K were analyzed by Langmuir andFreundlich isotherm models and results show that it is better represented by the Langmuir isothermmodel. The thermodynamics parameters, DH = 2.73 kJ/mol, DS = 28.14 J/mol K and DG < 0, show thatthe adsorption of Cr(VI) on LSAC is spontaneous and endothermic. The results show that LSAC is anefficient adsorbent for the removal of Cr(VI) from aqueous solutions.

A Network Load Sensitive Block Placement Strategy of HDFS

( Lingjun Meng ),( Wentao Zhao ),( Haohao Zhao ),( Yang Ding ) 한국인터넷정보학회 2015 KSII Transactions on Internet and Information Syst Vol.9 No.9

This paper investigates and analyzes the default block placement strategy of HDFS. HDFS is a typical representative distributed file system to stream vast amount of data effectively at high bandwidth to user applications. However, the default HDFS block placement policy assumes that all nodes in the cluster are homogeneous, and places blocks with a simple RoundRobin strategy without considering any nodes` resource characteristics, which decreases self-adaptability of the system. The primary contribution of this paper is the proposition of a network load sensitive block placement strategy. We have implemented our algorithm and justify it through extensive simulations and comparison with similar existing studies. The results indicate that our work not only performs much better in the data distribution but also improves write performance more significantly than the others.

Convective Heat Transfer Coeicient Model Under Nanoluid Minimum Quantity Lubrication Coupled with Cryogenic Air Grinding Ti–6Al–4V

Jianchao Zhang,Wentao Wu,Changhe Li,Min Yang,Yanbin Zhang,Dongzhou Jia,Yali Hou,Runze Li,Huajun Cao,Hafiz Muhammad Ali 한국정밀공학회 2021 International Journal of Precision Engineering and Vol.8 No.4

Under the threat of serious environmental pollution and resource waste, sustainable development and green manufacturing have gradually become a new development trend. A new environmentally sustainable approach, namely, cryogenic air nanofluid minimum quantity lubrication (CNMQL), is proposed considering the unfavorable lubricating characteristic of cryogenic air (CA) and the deficient cooling performance of minimum quantity lubrication (MQL). However, the heat transfer mechanism of vortex tube cold air fraction by CNMQL remains unclear. The cold air fraction of vortex tubes influences the boiling heat transfer state and cooling heat transfer performance of nanofluids during the grinding process. Thus, a convective heat transfer coefficient model was established based on the theory of boiling heat transfer and conduction, and the numerical simulation of finite difference and temperature field in the grinding zone under different vortex tube cold air fractions was conducted. Simulation results demonstrated that the highest temperature initially declines and then rises with increasing cold air fraction. Afterward, this temperature reaches the lowest peak (192.7 °C) when the cold air fraction is 0.35. Experimental verification was conducted with Ti–6Al–4V to verify the convective heat transfer coefficient model. The results concluded that the low specific grinding energy (66.03 J/mm 3 ), high viscosity (267.8 cP), and large contact angle (54.01°) of nanofluids were obtained when the cold air fraction was 0.35. Meanwhile, the lowest temperature of the grinding zone was obtained (183.9 °C). Furthermore, the experimental results were consistent with the theoretical analysis, thereby verifying the reliability of the simulation model.

Phylogenetic and expression analysis of the angiopoietin-like gene family and their role in lipid metabolism in pigs

Zibin Zheng,Wentao Lyu,Qihua Hong,Hua Yang,Ying Li,Shengjun Zhao,Ying Ren,Yingping Xiao Asian Australasian Association of Animal Productio 2023 Animal Bioscience Vol.36 No.10

Objective: The objective of this study was to investigate the phylogenetic and expression analysis of the angiopoietin-like (ANGPTL) gene family and their role in lipid metabolism in pigs. Methods: In this study, the amino acid sequence analysis, phylogenetic analysis, and chromosome adjacent gene analysis were performed to identify the ANGPTL gene family in pigs. According to the body weight data from 60 Jinhua pigs, different tissues of 6 pigs with average body weight were used to determine the expression profile of ANGPTL1-8. The ileum, subcutaneous fat, and liver of 8 pigs with distinct fatness were selected to analyze the gene expression of ANGPTL3, ANGPTL4, and ANGPTL8. Results: The sequence length of ANGPTLs in pigs was between 1,186 and 1,991 bp, and the pig ANGPTL family members shared common features with human homologous genes, including the high similarity of the amino acid sequence and chromosome flanking genes. Amino acid sequence analysis showed that ANGPTL1-7 had a highly conserved domain except for ANGPTL8. Phylogenetic analysis showed that each ANGPTL homologous gene shared a common origin. Quantitative reverse-transcription polymerase chain reaction analysis showed that ANGPTL family members had different expression patterns in different tissues. ANGPTL3 and ANGPTL8 were mainly expressed in the liver, while ANGPTL4 was expressed in many other tissues, such as the intestine and subcutaneous fat. The expression levels of ANGPTL3 in the liver and ANGPTL4 in the liver, intestine and subcutaneous fat of Jinhua pigs with low propensity for adipogenesis were significantly higher than those of high propensity for adipogenesis. Conclusion: These results increase our knowledge about the biological role of the ANGPTL family in this important economic species, it will also help to better understand the role of ANGPTL3, ANGPTL4, and ANGPTL8 in lipid metabolism of pigs, and provide innovative ideas for developing strategies to improve meat quality of pigs.

Development and Application of Three-Dimensional Bioprinting Scaffold in the Repair of Spinal Cord Injury

Lu Dezhi,Yang Yang,Zhang Pingping,Ma Zhenjiang,Li Wentao,Song Yan,Feng Haiyang,Yu Wenqiang,Ren Fuchao,Li Tao,Zeng Hong,Wang Jinwu 한국조직공학과 재생의학회 2022 조직공학과 재생의학 Vol.19 No.6

Spinal cord injury (SCI) is a disabling and destructive central nervous system injury that has not yet been successfully treated at this stage. Three-dimensional (3D) bioprinting has become a promising method to produce more biologically complex microstructures, which fabricate living neural constructs with anatomically accurate complex geometries and spatial distributions of neural stem cells, and this is critical in the treatment of SCI. With the development of 3D printing technology and the deepening of research, neural tissue engineering research using different printing methods, bio-inks, and cells to repair SCI has achieved certain results. Although satisfactory results have not yet been achieved, they have provided novel ideas for the clinical treatment of SCI. Considering the potential impact of 3D bioprinting technology on neural studies, this review focuses on 3D bioprinting methods widely used in SCI neural tissue engineering, and the latest technological applications of bioprinting of nerve tissues for the repair of SCI are discussed. In addition to introducing the recent progress, this work also describes the existing limitations and highlights emerging possibilities and future prospects in this field.

Expression Characterization, Polymorphism and Chromosomal Location of the Porcine Calsarcin-3 Gene

Wang, Heng,Yang, Shulin,Tang, Zhonglin,Mu, Yulian,Cui, Wentao,Li, Kui Asian Australasian Association of Animal Productio 2007 Animal Bioscience Vol.20 No.9

Calcineurin is a calmodulin dependent protein that functions as a regulator of muscle cell growth and function. Agents capable of interacting with calcineurin could have important applications in muscle disease treatment as well as in the improvement of livestock production. Calsarcins comprise a family of muscle-specific calcineurin binding proteins which play an important role in modulating the function of calcineurin in muscle cells. Recently, we described the first two members of the calsarcin family (calsarcin-1 and calsarcin-2) in the pig. Here, we characterized the third member of the calsarcin family, calsarcin-3, which is also expressed specifically in skeletal muscle. However, unlike calsarcin-1 and calsarcin-2, the calsarcin-3 mRNA expression in skeletal muscle kept rising throughout the prenatal and postnatal development periods. In addition, radiation hybrid mapping indicated that porcine calsarcin-3 mapped to the distal end of the q arm of pig chromosome 2 (SSC2). A C/T single nucleotide polymorphism site in exon 5 was genotyped using the denaturing high performance liquid chromatography (DHPLC) method and the allele frequencies at this locus were significantly different among breeds.

Changpingibacter yushuensis gen. nov., sp. nov., isolated from fluvial sediment in Qinghai Tibet Plateau of China

Jiao Yifan,Zhang Sihui,Yang Jing,Lai Xin-He,Dong Kui,Cheng Yanpeng,Xu Mingchao,Zhu Wentao,Lu Shan,Jin Dong,Pu Ji,Huang Ying,Liu Liyun,Wang Suping,Xu Jianguo 한국미생물학회 2022 The journal of microbiology Vol.60 No.2

Two facultatively anaerobic, short rod-shaped, non-motile, Gram-stain-positive, unknown bacterial strains (JY-X040T and JY-X174) were isolated from fluvial sediments of Tongtian River in Yushu Tibetan Autonomous Prefecture, Qinghai province, China. Cells formed translucent, gray, round and convex colonies, with a diameter of less than 0.5 mm after 5 days of incubation at 30°C on brain heart infusion-5% sheep blood agar. The 16S rRNA gene sequence similarity between strain JY-X040T and Fudania jinshanensis 313T is 93.87%. In the four phylogenetic trees constructed based on the 16S rRNA gene and 423 core genes, the two isolates form an independent branch, phylogenetically closest to F. jinshanensis 313T, but could not be classified as a member of the genus Fudania or any other genus of the family Arcanobacteriaceae. The DNA G + C content of strain JY-X040T was 57.8%. Calculation results of average nucleotide identity, digital DNADNA hybridization value and amino acid identity between strain JY-X040T and F. jinshanensis 313T are 69.9%, 22.9%, and 64.1%. The major cellular fatty acids were C16:0 (23%) and C18:1ω9c (22%). The cell-wall peptidoglycan type was A5α (L-Lys-L-Ala-L-Lys-D-Glu). The polar lipids comprised diphosphatidylglycerol, phosphatidylglycerol, phosphatidylinositol, phosphatidylinositol mannoside and four unidentified components. The whole-cell sugars contained rhamnose and ribose. MK-10(H4) was the sole respiratory quinone. The minimum inhibitory concentration of streptomycin was 32 μg/ml. All physiological, biochemical, chemotaxonomic and genomic characteristics support that strains JY-X040T and JY-X174 represent members of a novel species in a new genus, Changpingibacter yushuensis gen. nov., sp. nov. The type strain is JY-X040T (GDMCC 1.1996T = KCTC 49514T).

Immunogenicity of recombinant Lactobacillus plantarum NC8 expressing goose parvovirus VP2 gene in BALB/c mice

Yu-Ying Liu,Wentao Yang,Shaohua Shi,Ya-Jie Li,Liang Zhao,Chunwei Shi,Fangyu Zhou,Yanlong Jiang,Jingtao Hu,Wei Gu,Gui-Lian Yang,Chun-feng Wang 대한수의학회 2017 Journal of Veterinary Science Vol.18 No.2

Goose parvovirus (GPV) continues to be a threat to goose farms and has significant economic effects on the production of geese. Current commercially available vaccines only rarely prevent GPV infection. In our study, Lactobacillus (L.) plantarum NC8 was selected as a vector to express the VP2 gene of GPV, and recombinant L. plantarum pSIP409-VP2/NC8 was successfully constructed. The molecular weight of the expressed recombinant protein was approximately 70 kDa. Mice were immunized with a 2 × 109 colony-forming unit/200 mL dose of the recombinant L. plantarum strain, and the ratios and numbers of CD11c+, CD3+CD4+, CD3+CD8+, and interferon gamma- and tumor necrosis factor alpha-expressing spleen lymphocytes in the pSIP409-VP2/NC8 group were higher than those in the control groups. In addition, we assessed the capacity of L. plantarum SIP409-VP2/NC8 to induce secretory IgA production. We conclude that administered pSIP409-VP2/NC8 leads to relatively extensive cellular responses. This study provides information on GPV infection and offers a clear framework of options available for GPV control strategies.