The Construction Scheme Analysis of Distant Communication Systems for Subscriber Power Consumption Information Acquisition Systems

Jiang, Hai,Yao, Jianguo,Zhang, Guanyuan The Korean Institute of Electrical Engineers 2011 The Journal of International Council on Electrical Vol.1 No.4

With regard to distant communication of Subscriber Power Consumption Information Acquisition Systems (SPCIAS), this paper analyzes some distant communication technologies such as private optical fiber network, wireless private network, wireless public network and etc. The rules for choosing the type of communication technologies are also given in various application areas. In the meanwhile, considering that the SPCIASs must adopt various types of distant communication technologies,this paper presents "the Communication Integrated Platform for the SPCIASs"(CIP).

Modified Wettability of Micro-structured Steel Surfaces Fabricated by Elliptical Vibration Diamond Cutting

Jianguo Zhang,Andreas Rosenkranz,Junjie Zhang,Jiang Guo,Xiaoqing Li,Xiao Chen,Junfeng Xiao,Jianfeng Xu 한국정밀공학회 2022 International Journal of Precision Engineering and Vol.9 No.5

Hardened steel is an important material related to the development of modern industry branches. In order to satisfy the adhesion strength as well as the corrosion and wear resistance under extreme conditions, the modification of the wettability of hardened steel has become an important scientific topic. As micro/nano-structured surfaces play an essential role to induce advanced functional surfaces with wettability control, this contribution aims at presenting the feasibility of micro/nano sculpturing of hardened steels by elliptical vibration diamond cutting. The influence of the fabricated micro/nano structures on the resulting wettability is discussed and related to the contact line density as well as asperity heights. In this regard, it has been verified that a pitch value of 12 μm and structural height of 500 nm are the preferred structural parameters to increase the hydrophobicity of the textured steel specimens.

Nonlinear stability analysis of a radially retractable hybrid grid shell in the closed position

Jianguo Cai,Qian Zhang,Youbao Jiang,Yixiang Xu,Jianfeng Zhao,Xiaowei Deng 국제구조공학회 2017 Steel and Composite Structures, An International J Vol.24 No.3

The buckling capacity of a radially retractable hybrid grid shell in the closed position was investigated in this paper. The geometrically non-linear elastic buckling and elasto-plastic buckling analyses of the hybrid structure were carried out. A parametric study was done to investigate the effects rise-to-span ratio, beam section, area and pre-stress of cables, on the failure load. Also, the influence of the shape and scale of imperfections on the elasto-plastic buckling loads was discussed. The results show that the critical buckling load is reduced by taking account of material non-linearity. Furthermore, increasing the rise-tospan ratio or the cross-section area of steel beams notably improves the stability of the structure. However, the cross section area and pre-stress of cables pose negligible effect on the structural stability. It can also be found that the hybrid structure is highly sensitive to geometric imperfection which will considerably reduce the failure load. The proper shape and scale of the imperfection are also important.

Static analysis of a radially retractable hybrid grid shell in the closed position

Jianguo Cai,Chao Jiang,Xiaowei Deng,Jianfeng Zhao,Yixiang Xu 국제구조공학회 2015 Steel and Composite Structures, An International J Vol.18 No.6

A radially retractable roof structure based on the concept of the hybrid grid shell is proposed in this paper. The single-layer steel trusses of the radially foldable bar structure are diagonally stiffened by cables, which leads to a single-layer lattice shell with triangular mesh. Then comparison between the static behavior between the retractable hybrid grid shell and the corresponding foldable bar shell with quadrangular mesh is discussed. Moreover, the effects of different structural parameters, such as the rise-to-span ratio, the bar cross section area and the pre-stress of the cables, on the structural behaviors are investigated. The results show that prestressed cables can strengthen the foldable bar shell with quadrangular mesh. Higher structural stiffness is anticipated by introducing cables into the hybrid system. When the rise-span ratio is equal to 0.2, where the joint displacement reaches the minimal value, the structure shape of the hyrbid grid shell approaches the reasonable arch axis. The increase of the section of steel bars contributes a lot to the integrity stiffness of the structure. Increasing cable sections would enhance the structure stiffness, but it contributes little to axial forces in structural members. And the level of cable prestress has slight influence on the joint displacements and member forces.

Double hysteresis loops induced by Mn doping in Pb0.99Nb0.02(Zr0.95Ti0.05)0.98O3 ferroelectric ceramics

Meng Jiang,Xuhai Li,Jiliang Zhu,Xiaohong Zhu,Wei Shi,Lihua Li,Dingquan Xiao,Jianguo Zhu 한국물리학회 2010 Current Applied Physics Vol.10 No.2

Pb0.99Nb0.02(Zr0.95Ti0.05)0.98O3 (PNZT95/5) ceramics with 1 mol% and without Mn doping were prepared via conventional solid state reaction process. X-ray diffraction patterns show that the PNZT95/5 and Mn-doped PNZT95/5 (PNZTM95/5) ceramics, with composition near the boundary of the ferroelectric phase (FE)/antiferroelectric phase (AFE), have a rhombohedral perovskite structure. The ferroelectric behavior of PNZT95/5 ceramics is strongly affected by Mn doping. Without any aging process the PNZTM95/5 ceramics possess double hysteresis loops (P–E loops), whereas the PNZT95/5 ceramics possess normal single hysteresis loops. Due to the defect dipoles formed by effectively negatively charged Mn3+ dopants and positively charged O2- vacancies, the PNZTM95/5 ceramics exhibit the double P–E loops. The defect dipole effect has been proved by investigating the P–E loops under different external fields. As a result, the PNZTM95/5 ceramics become ‘‘hardened”, exhibiting a high mechanical quality factor (1300).

Active Voltage-balancing Control Methods for the Floating Capacitors and DC-link Capacitors of Five-level Active Neutral-Point-Clamped Converter

Junjie Li,Jianguo Jiang 전력전자학회 2017 JOURNAL OF POWER ELECTRONICS Vol.17 No.3

Multilevel active neutral-point-clamped (ANPC) converter combines the advantages of three-level ANPC converter and multilevel flying capacitor (FC) converter. However, multilevel ANPC converter often suffers from capacitor voltage balancing problems. In order to solve the capacitor voltage balancing problems for five-level ANPC converter, phase-shifted pulse width modulation (PS-PWM) is used, which generally provides natural voltage balancing ability. However, the natural voltage balancing ability depends on the load conditions and converter parameters. In order to eliminate voltage deviations under steady-state and dynamic conditions, the active voltage-balancing control (AVBC) methods of floating capacitors and dc-link capacitors based on PS-PWM are proposed. First, the neutral-point current is regulated to balance the neutral-point voltage by injecting zero-sequence voltage. After that, the duty cycles of the redundant switch combinations are adjusted to balance the floating-capacitor voltages by introducing moderating variables for each of the phases. Finally, the effectiveness of the proposed AVBC methods is verified by experimental results.

An Improved Flux Estimator for Gap Flux Orientation Control of DC-Excited Synchronous Machines

Yajun Xu,Jianguo Jiang 전력전자학회 2015 JOURNAL OF POWER ELECTRONICS Vol.15 No.2

Flux estimation is a significant foundation of high-performance control for DC-excited synchronous motor. For almost all flux estimators, such as the flux estimator based on phase locked loop (PLL), DC drift causes fluctuations in flux magnitude. Furthermore, significant dynamic error may be introduced at transient conditions. To overcome these problems, this paper proposes an improved flux estimator for the PLL-based algorithm. Filters based on the generalized integrator are used to avoid flux fluctuation problems caused by the DC drift at the back electromotive force. Programmable low-pass filters are employed to improve the dynamic performance of the flux estimator, and the cutoff frequency of the filter is determined by the dynamic factor. The algorithm is verified by a 960V/1.6MW industrial prototype. Simulation and experimental results show that the proposed estimator can estimate the flux more accurately than the PLL-based algorithm in a cycloconverter-fed DC-excited synchronous machine vector control system.

Active Voltage-balancing Control Methods for the Floating Capacitors and DC-link Capacitors of Five-level Active Neutral-Point-Clamped Converter

Li, Junjie,Jiang, Jianguo The Korean Institute of Power Electronics 2017 JOURNAL OF POWER ELECTRONICS Vol.17 No.3

Multilevel active neutral-point-clamped (ANPC) converter combines the advantages of three-level ANPC converter and multilevel flying capacitor (FC) converter. However, multilevel ANPC converter often suffers from capacitor voltage balancing problems. In order to solve the capacitor voltage balancing problems for five-level ANPC converter, phase-shifted pulse width modulation (PS-PWM) is used, which generally provides natural voltage balancing ability. However, the natural voltage balancing ability depends on the load conditions and converter parameters. In order to eliminate voltage deviations under steady-state and dynamic conditions, the active voltage-balancing control (AVBC) methods of floating capacitors and dc-link capacitors based on PS-PWM are proposed. First, the neutral-point current is regulated to balance the neutral-point voltage by injecting zero-sequence voltage. After that, the duty cycles of the redundant switch combinations are adjusted to balance the floating-capacitor voltages by introducing moderating variables for each of the phases. Finally, the effectiveness of the proposed AVBC methods is verified by experimental results.

An Improved Flux Estimator for Gap Flux Orientation Control of DC-Excited Synchronous Machines

Xu, Yajun,Jiang, Jianguo The Korean Institute of Power Electronics 2015 JOURNAL OF POWER ELECTRONICS Vol.15 No.2

Flux estimation is a significant foundation of high-performance control for DC-excited synchronous motor. For almost all flux estimators, such as the flux estimator based on phase locked loop (PLL), DC drift causes fluctuations in flux magnitude. Furthermore, significant dynamic error may be introduced at transient conditions. To overcome these problems, this paper proposes an improved flux estimator for the PLL-based algorithm. Filters based on the generalized integrator are used to avoid flux fluctuation problems caused by the DC drift at the back electromotive force. Programmable low-pass filters are employed to improve the dynamic performance of the flux estimator, and the cutoff frequency of the filter is determined by the dynamic factor. The algorithm is verified by a 960V/1.6MW industrial prototype. Simulation and experimental results show that the proposed estimator can estimate the flux more accurately than the PLL-based algorithm in a cycloconverter-fed DC-excited synchronous machine vector control system.

Multivariable Optimal Control of a Direct AC/AC Converter under Rotating dq Frames

Wan, Yun,Liu, Steven,Jiang, Jianguo The Korean Institute of Power Electronics 2013 JOURNAL OF POWER ELECTRONICS Vol.13 No.3

The modular multilevel cascade converter (MMCC) is a new family of multilevel power converters with modular realization and a cascaded pattern for submodules. The MMCC family can be classified by basic configurations and submodule types. One member of this family, the Hexverter, is configured as Double-Delta Full-Bridge (DDFB). It is a novel multilevel AC/AC converter with direct power conversion and comparatively fewer required components. It is appropriate for connecting two three-phase systems with different frequencies and driving an AC motor directly from a utility grid. This paper presents the dq model of a Hexverter with both of its AC systems by state-space representation, which then simplifies the continuous time-varying model into a periodic discrete time-invariant one. Then a generalized multivariable optimal control strategy for regulating the Hexverter's independent currents is developed. The resulting control structure can be adapted to other MMCCs and is flexible enough to include other control criterion while guaranteeing the original controller performance. The modeling method and control design are verified by simulation results.