http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
민수영,송제선,이제호,최형준,손흥규,김성오 大韓小兒齒科學會 2012 大韓小兒齒科學會誌 Vol.39 No.1
Supernumerary tooth occurs most frequently at premaxilla area. Followed by mandibular premolar area, mandibular fourth molar area, maxillary paramolar area. Mesiodens are mainly impacted in the palatal area and surgical approach is made at palatal side. The time of surgery remains controversial. In case of inverted or horizontal impacted supernumerary tooth, intraosseous tooth movement and vertical growth of premaxilla makes surgical extraction more difficult. And also the more quantity of removed bone is, the higher degree of difficulty is. Inverted mesiodens of these cases were impacted superior to apex level of adjacent permanent incisor. Although CT examination revealed exact location of impacted tooth, surgical procedure including ostectomy may take a long time more than expected. So, before surgical extraction, it’s need to be considered several factors such as necessity of CT taking, degree of difficulty, direction of surgical approach, necessity of general anesthesia etc. 정중 과잉치(mesiodens)는 대개 상악 절치부에서 발견되며, 주로 구개측에 위치하는 경향이 있다. 정중 과잉치의 자연맹 출 가능성이 관찰되면, 주기적으로 검사하여 구강내로 충분히 맹출한 후에 단순발치를 시행한다. 주기적 검사에서 자연맹출 소견이 보이지 않거나, 형태이상 혹은 맹출방향의 이상으로 구강 내로 자연맹출 할 가능성이 없으면, 수술적 제거방법을 고려 해야 할 것이다. 특히, 인접한 중절치나 측절치의 맹출을 방해하고 있는 상황이 관찰된다면, 빠른 시일 내에 과잉치 제거를 위 한 수술적 방법을 시도하는 것이 타당하다. 한편, 외과적 수술의 시기를 늦추는 것을 고려해야 하는 경우도 있다. 정중과잉치가 인접하여 발육중인 정상 치아의 맹출을 방해하지 않는 경우이다. 이때, 삼차원 CT사진을 촬영하여보면, 과잉치 주변으로 영구절치의 치배가 근접하여 성곽처럼 둘러 싸고 있는 것을 볼 수 있다. 미성숙한 치배가 둘러 싸고 있는 상황에서, 무리하게 과잉치를 제거하려고 시도할 경우 인접 치배 를 손상시킬 가능성을 배제하기 어렵다. 이 점을 고려 한다면, 가급적 인접한 치아의 치근이 보다 발육한 후에 수술을 시도하 는 것이 바람직할 것이다. 초등학교 2학년 이상의 어린이들은 외래에서 국소마취하 제거하는 수술방법에 대개 잘 적응하며 고학년이 될수록 보다 수월해진다. 수술시기를 너무 늦추거나, 과잉치가 너무 늦게 발견된 경우 구개측 심부로 깊이 이동한 것을 볼 수 있다. 때로는 과잉치의 위치가 처음부터 심부에 매복되어 있을 수 있다. 이와 같은 경우, 전신마취방법을 생각해 볼 수 있을 것이다. 본 증례는 상악 정중부의 깊은 부위에 역위 매복된 과잉치를 외래에서 국소마취하에 치료를 시도할 때 관찰되는 문제점을 고찰하였고, 전신마취방법을 결정하기 위한 기준을 제시하였다. 심부 매복된 치아의 외과적 발거시 어린이의 행동조절이 가장 큰 문제였으며, 방사선 소견상 과잉치 치관의 위치가 절치의 치근단보다 상방에 위치할 경우 전신마취로 전환 하는 것이 바람직 할 것으로 사료된다.
이동흡,이명재,오형민,손동원 한국목재공학회 2004 목재공학 Vol.32 No.2
본 실험은 건조되지 않은 목재를 고온의 아마인유에 침지처리함으로써 목재건조와 동시에 발수효과를 얻고자 실시하였다. 함수율 90% 이상의 소나무생재를 온도 150℃의 아마인유에서 6시간 침지처리하였을 때 목재함수율은 10%까지 떨어졌으며, 목재 축방향의 깊이에 관계없이 목재단면의 20%에 해당하는 아마인유가 침투하였다. 이때 목재의 강도적 손실은 발생하지 않은 것으로 나타났다. 목재표면의 천공처리는 목재의 내부할열방지에 효과적이었고, 아마인유의 깊은 침투를 유도할 수 있었다. 흡수성 시험 결과 처리재는 무처리재에 비하여 높은 발수효과를 나타냈다. 변색균 및 부후균에 대한 항균효력시험은 처리재 자체로서 균에 대한 독성 기작이 없었으나, 백색부후균 및 갈색부후균에 대해서는 무처리재보다 낮은 중량감소율을 나타내는 등 방부효력의 상승이 있었다. This study attempted to evaluate the water repellency and drying effectiveness of linseed oil treated-solid wood at high temperature by immersion. The moisture content of green wood (Pinus densiflora) sample (above 90%) was reduced about 10% after 6 hours treatment at 150℃. When the treated samples were cut into cross section along the length, it was observed that the linseed oil penetrated into up to 20% of the sample cross section area in all locations. However, a strength loss of the specimen was not detected. The pre-drilling before linseed oil treatment was effective in reducing the defects such as checks and splits, and improved the linseed oil penetration into all samples from the surfaces. The result of water absorption test of treated-wood showed that the water repellent efficacy of treated-wood was greater than that of the control. The anti-fungal activity of treated samples using five sap stains and thee decay fung was not detected in broad-spectrum toxic mechanism. However, decay test using white rot fungi(Tyromyces palustris) and brown rot fungi(Trametes versicolor) showed that the treated sample has a decay resistance to thew two fungi.
Design and control of a linearity-enhanced SMA actuator
Son, Hyung-Min,Tak, Chul-Gon,Kang, Seok-Won,Kim, Jae-Il,Nam, Tae-Hyun,Lee, Yun-Jung Royal Swedish Academy of Sciences 2010 Physica scripta Vol.2010 No.t139
<P>For the accurate and dexterous operation of mechanical systems, continuous-type actuation, rather than on/off-type actuation, is an indispensable function. However, conventional Ti–Ni alloys present difficulties for continuous positioning control, due to their hysteretic and abruptly changing relationship between strain and temperature. Therefore, this paper proposes a new linearity-enhanced SMA actuator using a temperature-gradient annealed alloy and an inverse hysteresis controller. In comparative experiments, the proposed controller and alloy exhibit superior performance for continuous actuation.</P>
Tunable-focus liquid lens system controlled by antagonistic winding-type SMA actuator
Son, Hyung-Min,Kim, Min Young,Lee, Yun-Jung The Optical Society 2009 Optics express Vol.17 No.16
<P>A new tunable-focus liquid lens system is proposed that consists of a liquid-filled PDMS (polydimethylsiloxane) membrane, special liquid injection mechanism based on a cam structure, antagonistic winding-type SMA(shape memory alloys) actuator for changing the surface curvature of the membrane, and liquid injection control system, including a digital signal processing board and actuator driver board. The focal length of the liquid lens is adjusted by changing the radius of the curvature of the liquid lens through redistributing the liquid using an injection mechanism. In the case of liquid lens systems using conventional injection mechanisms, the nonlinear relationship between the focal length change and the actuator displacement makes it difficult to control the focal length of the lens system, as there is only a narrow control range for adjusting the focal length over a wide range. In addition, miniaturization of the lens system is difficult due to the requirement of bulky and heavy actuators, such as an electrical motor and pump[7]. Thus, a relatively light and small SMA actuator is proposed for a compact lens system. This paper then provides a detailed description of the proposed tunable-focus liquid lens system, and an experimental system is also implemented. Finally, the focusing performance of the proposed liquid lens system is analyzed, and its usefulness and effectiveness verified through a series of experiments.</P>
산소 플라즈마 처리된 그래핀 산화물이 PMMA/수산화알루미늄 컴포지트의 기계적 물성에 미치는 영향
김형일(Hyung Il Kim),김효철(Hyo Chul Kim),전소녀(Son Yeo Jeon),최호석(Ho Suk Choi),홍민혁(Min Hyuk Hong),최기섭(Ki Seop Choi) 한국고분자학회 2011 폴리머 Vol.35 No.6
Poly(methyl methacrylate)/aluminum hydroxide(PMMA/AH) 컴포지트의 기계적 강도를 향상시키기 위해 그래핀 산화물(GO)을 충전제로 사용하여 나노컴포지트를 제조하였다. GO는 흑연을 Hummers법으로 산화한 후 열 처리에 의해 박리시켜 제조하였다. PMMA/AH 컴포지트 매트릭스와의 계면혼화성을 향상시키기 위해 산소 플라즈마를 사용하여 노출 시간을 0분에서 70분까지 변화를 주어가며 GO 표면을 개질시켰다. 노출 시간이 50분까지 증가함에 따라 산소 플라즈마 처리한 GO를 충전제로 사용한 나노컴포지트는 PMMA/AH 컴포지트에 비해 굴곡강도, 굴곡탄성률, Rockwell 경도, Barcol 경도, Izod 충격강도 모두 현저히 증가하였다. 적절한 조건에서 산소 플라즈마 처리된 GO는 PMMA/AH 컴포지트 매트릭스와의 계면접착력이 매우 우수함을 파단면 모폴로지로부터 확인하였다. 하지만 GO의 함량 이 0.07 phr 이상으로 증가하면 충전제의 분산이 균일하지 못하여 나노컴포지트의 기계적 강도는 오히려 감소하는 경향 을 나타내었다. The nanocomposites containing graphene oxide (GO) were prepared in order to improve the mechanical properties of poly(methyl methacrylate)/aluminum hydroxide (PMMA/AH) composites. GO was prepared from graphite by oxidation of Hummers method followed by exfoliation with thermal treatment. The surface of GO was modified by oxygen plasma in various exposure times from 0 to 70 min to improve interfacial compatibility. Compared with PMMA/AH composites, the nanocomposites containing GO modified with oxygen plasma for the exposure time up to 50 min showed significant increases in flexural strength, flexural modulus, Rockwell hardness, Barcol hardness, and Izod impact strength. The morphology of fracture surface showed an improved interfacial adhesion between PMMA/AH composites and GO, which was properly treated with oxygen plasma. The mechanical properties of nanocomposites were deteriorated by increasing the content of GO above 0.07 phr due to the nonuniform dispersion of GO.