건물의 에너지 효율을 위한 건축적 계획 방법 연구 : 자연실온과 환경 디자인 요소의 상관도 분석을 중심으로 Focused on Correlation Analysis of NART and Environmental Design Factors

장용성,이현수,서승직,박효순 대한건축학회 2005 대한건축학회논문집 Vol.21 No.2

This study intends to deriving the equation of non-airconditioned room temperature(hereafter referred to as NART) prediction from the correlation analysis of the influence of environmental design factors on the building. The relation between the NART and environmental design factors was analysed by using correlation coefficients. The equation of NART prediction was derived from the regression analysis by experimentation and simulation. In this study, the main results are summarized as follows: The average NART of experiment and simulation were evaluated to 22.0℃ and 22.6℃, respectively. An error of simulation was the 2.7%. The results from correlation analysis was con-elated with the daily average outdoor temperature, soil temperature, solar intensity, relative humidity, and air velocity in order. Con-elation coefficients of the daily average outdoor temperature, NART, and peak air conditioning load were over the 0.75. According to the sensitivity analysis of environmental design factors and air conditioning load in reference model, the influence of air infiltration and window surface ratio were more than outside insultion.

재구성 가능형 공작기계의 주축 시스템 설계

장성현,정용민,황현영,최영휴,박종권 한국공작기계학회 2008 한국공작기계학회 춘계학술대회논문집 Vol.2008 No.-

During a decade, there are many researches on microfactory which is the miniature, flexible, and efficient manufacturing system for the micro/meso scale machining device. Moreover many micro machine tool has developed in Japan, U.S., Europe, and Korea. Already we developed a 3-axis micro milling machine with 300×200×320 ㎣ machine size for microfactory. In this study, we introduce the design of a high speed spindle system with air bearings for our micro milling machine. Desired operation speed range of the spindle system is 100,000 ~ 150,000 rpm. In. design step, we have consideration for minimum critical speed, compliance, and weight construction of the spindle system. The shaft length, the shaft outer diameter, bearing positions and bearing stiffness were set as the design values. After the final design of spindle model, we carried out dynamic analysis a spindle system for a micro milling machine by using ADROS, which is our own developed S/W for dynamic design analysis of rotor systems. As the result, we designed a spindle system having the critical speed above the operating speed.

위의 유암종과 선종의 병발 1례

장재식,강혁주,이중현,서영범,윤병구,김용섭,이구,서정일,양창헌,이창우,김정란,윤환중 東國大學校醫學硏究所 2000 東國醫學 Vol.7 No.-

유암종은 전신에 퍼져 잇는 장크롬친화성 세포에서 기원하는데 위의 유암종은 비교적 드문 질환으로 모든 유암종의 1.9~2.2%에 해당하며 위에 발생하는 종양의 1% 미만에서 보고되고 있다. 유암종은 일반적으로 증상이 비특이적이고 면역조직화학검사에 의해서 진단되기 때문에 과거에는 드물게 발견되었으나 최근 내시경 기기 및 술기의 발전과 검사 빈도의 증가 및 면역조직화학검사의 발달로 진단율이 증가 추세에 있으며, 드물지만 유암종에서 선암과 공존하는 예들이 보고되고 있다. 저자들은 심와부 동통을 주소로 내원한 70세 남자 환자의 상부위장관내시경 검사에서 위체상부의 대만곡에서 0.4×0.4 cm 크기의 중간 함몰을 가진 Yamada 1형의 용종과 함께 전정부의 전벽에서 0.8×0.5 cm 크기의 융기된 점막 소견을 보여 조직학적으로 각각 위유암종 및 위선종임을 확진한 후 내시경적 용종 절제술로 치료한 1예를 경험하였기에 문헌고찰과 함께 보고하는 바이다. Carcinoid tumors are arisen from enterochromaffin cells, which are scattered throughout the body. These tumors are composed of variable numbers of cells that contain endocrine granules in their cytoplasm, which can be identified by immunohistochemistry and electron microscopy. Gastric carcinoid tumors are relatively rare tumor, the reported incidence being 1.9~2.2% of all carcinoid tumors and less than 1% of all gastric tumors. Sometimes, composite carcinoid tumors and adenocarcinoma is reported. We experienced a case of the coincidence of carcinoid tumor and adenoma at the other site of the stomach in a 70 year old male patient. Gastrofiberscope showed 0.4×0.4 cm sized Yamada type I polyp with central depression on the greater curvature of the proximal body and 0.8×0.5 cm sized focal slightly elevated mucosa on the anterior wall of the antrum. The endoscopic biopsy specimens revealed carcinoid tumor and tubular adenoma with moderate atypism, respectively. The carcinoid tumor and adenoma were removed by endoscopic polypectomy. According to the follow-up gastrofiberoscopy after 7 month later, both lesions were nearly normal mucosa except whitish atrophic change after polypectomy.

뇌졸중의 운동신경기능 회복

장성호,권용현 영남대학교 의과대학 2005 Yeungnam University Journal of Medicine Vol.22 No.2

Stroke is a leading cause of chronic physical disability. The recent randomized controlled trials have that motor function of chronic stroke survivors could be improved through physical or pharmacologic intervention in the stroke rehabilitation setting. In addition, several functional neuroimaging techniques have recently developed, it is available to study the functional topography of sensorimotor area of the brain. However, the mechanisms involved in motor recovery after stoke, are still poorly understood. Four motor recovery mechanisms have been suggested, such as reorganization into areas adjacent to the injured primary motor cortex (M1), unmasking of the motor pathway from the unaffected motor cortex to the affected hand, attribution of secondary motor areas, and recovery of the damaged contralateral corticospinal tract. Understanding the motor recovery mechanisms would provide neurorehabilitation specialists with more information to allow for precise prognosis and therapeutic strategies based on the scientific evidence; this may help promote recovery of motor function. This review introduces several methodologies for neuroimaging techniques and recovery after stroke. Perspectives, for future research are presented.

벡터드라이버를 이용한 편측형 선형유도전동기 구동특성에 관한 연구

장용해,임홍우,신사현,조금배,백형래 조선대학교 에너지.자원신기술연구소 2001 에너지·자원신기술연구소 논문지 Vol.23 No.2

The input voltage of Single-sided linear induction motors (SLIMs) is involved with the time harmonics because most LIM is driven by inverter. Therefore the equivalent circuit for an inverter-fed SLIM has t o be modifided to represent every harmonic present in supply voltage. This paper describes that the dynamic characteristic can be used effectively for analyzing the characteristics of a single-sided linear induction motor using vector driver for PI controller.

시간스케일에 따른 해양표면수온과 기온의 변동 및 상관연구

장이현,강용균,서영상 한국환경과학회 2000 한국환경과학회지 Vol.9 No.4

The relationship between air temperature and sea surface temperature are studied using the daily air temperature and sea surface temperature data for 25 years (1970∼1994) at 9 coastal stations in Korea. Seasonal variations of air temperature have larger amplitudes than those of sea surface temperature. The seasonal variations of air temperature leads those of sea surface temperature by 2 to 3 weeks. The anomalies of sea surface temperature and air temperature are positively correlated. The long term anomalies of sea surface temperature and air temperature with time scales more than 1 month are more highly correlated than those of short term, with time scales less than 1 month. Accumulated monthly anomalies of sea surface temperature and air temperature for 6 months showed higher correlation than the anomalies of each month. The magnitudes of sea surface temperature and air temperature anomalies are related with the duration of anomalies. Their magnitudes are large when the durations of anomalies are long.

시멘트 종류별 콘크리트의 적산온도에 의한 강도예측에 관한 연구

장종호,나철성,김재환,김용로,길배수,남재현,김무한 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.2

The purpose of this study is to exhibit fundamental data which can apply to quality and process management of structure concrete using special cement in the construction field investigating strength prediction by maturity method of concrete according to cement types. The activation energy value was derived from the experimental study that experimental factors were selected as W/C ratio of 45%, the kinds of cements of 3 levels of O.P.C, H.B.C, H.S.C and curing temperature of 3 levels of 5℃, 20℃, 35℃. Also, after investigating relationship between compression strength and equivalent ages of concrete according to cement types, the strength prediction was investigated by maturity method. As the above of results, differences between the prediction strength by strength prediction equation and the actual measurement strength were lower, therefore it is considered that the strength prediction by maturity method is possible not only concrete using normal portland cement but also concrete using special cement.

Trp P-1 변이원성에 대한 Resveratrol의 항돌연변이 효과

장귀현,안병용,권용주,최동성 한국식품영양학회 2001 韓國食品營養學會誌 Vol.14 No.4

Trp P-1에 의해 유도된 돌연변이원성에 대한 resveratrol의 억제효과를 Salmonella typhimurium TA 98, 100를 이용한 Ames test법으로 검색하였다 먼저 틀변경 돌연변이를 일으키는 S. typhimurium TA98과 염기치환 돌연변이 특성을 지닌 S.typhimurium TA 100에서 Trp P-1의 변이원성을 비교한 결과 S. typhimurium TA98에서 복귀돌연변이의 뚜렷하게 수가 증가되었다. 이러한 결과는 Trp P-1의 돌연변이 유발은 틀변경을 주로 일으킨 돌연변이 유도란 사실을 뒷받침하는 결과로 해석되며,S. typhimurium TA98에서 Trp P-1의 최적농도는 400 ng로 나타났다. S. typhimurium TA98의 생육에 영향을 미치지 않는 농도까지 resveratrol의 농도를 assay당 2, 10, 25, 50 100, 300 ㎍으로 증가시켰을 경우 항돌연변이 효과는 각각 13%, 30%, 52%, 65%, 81% 및 89%로 나타났다. 이러한 결과로부터 Trp P-1의 변이원성에 대하여 resveratrol은 강한 돌연변이 억제효과를 나타내며, 용량 의존적으로 억제함이 확인되었다. The antimutagenic activity of resveratrol on the mutagenicity induced by Trp P-1(3-amino-1,4-dimethyl-5H-pyrido{4,3-b}indole) was studied using the Ames test with Salmonella typhimurium TA98 and 100. Trp P-1 showed strong mutagenecity in S. typhimurium TA98, but was higly decreased mutagenecity in S. typhimurium TA100. This result suggests that the mutagenecity of Trp P-1 can be mainly induced by the DNA lesions causing frame shift. Resveratrol itself did not show antibacterial effect upon 300 rig/assay. Resveratrol showed the strongest inhibitory effect with dose dependent manner on the mutagenicity induced by Trp P-1. The inhibition rates of resveratrol at concentration of 2, 10, 25, 50, 100, 300 ㎍/assay were 13%, 30%, 52%, 65%, 81%, 89%, respectively.

평면 2자유도 모델을 이용한 리니어 모터로 구동되는 다축 마이크로 밀링머신 크로스헤드의 진동해석

장성현,황현영,정용민,최영휴,홍정표 한국공작기계학회 2008 한국공작기계학회 추계학술대회논문집 Vol.2008 No.-

In this paper, a simple 2-D.O.F. planar motion model is proposed in order to analyze the snake motion of a cross head assembly of a Multi-axis micro milling machine (M4) for BT-factory, that is travelling on linear guide. In the proposed mathematical model, the friction between head and guide ways is neglected, and also the support structures including the linear guides of M4 are assumed to be rigid. The equations of motion of the proposed model are derived and successfully solved to determine vibration responses of a cross head assembly due to some applied traction forces.

Bone-supported pendulum을 이용한 상악대구치 원심이동

장용걸,박호원,이주현,서현우 大韓小兒齒科學會 2009 大韓小兒齒科學會誌 Vol.36 No.3

상악 대구치의 원심이동이 요구되는 경우, 구외견인, Wilson distalizing arches, 가철식 스프링 장치 그리고 Schwarz plate-type 장치 등을 사용 할 수 있다. 그러나 이러한 전통적인 대구치의 원심이동 장치들로 치료에 성공하기 위해서는 환자의 협조가 필수적이기 때문에 많은 소아치과 의사들은 환자 의존성을 최소화하고 임상가가 통제 할 수 있는 장치들로 전환하고 있다. 이 중 가장 일반적인 것이 pendulum 장치인데, 고정원이 되는 전방치아의 원하지 않는 이동과 고정원 소실, 그리고 구개부 고정원이 좋지 않은 경우 원하는 정도의 구치부 원심이동을 얻기 어렵다는 단점이 있다. 이와 같은 전통적인 pendulum의 단점을 해결하고자, SAS(Skeletal Anchorage System)를 pendulum에 접목하여 골에서 직접 지지를 얻는 변형된 형태의 pendulum, 즉 bone supported pendulum을 제작하여 장착 시킨 후 주기적인 관찰을 시행하였다. 본 증례는 혼합치열기 환자를 대상으로 bone supported pendulum을 사용하여 안정된 고정원 유지, 원치 않는 치아이동의 최소화 및 양호한 상악 대구치 원심이동 등을 관찰하였기에 이를 보고하는 바이다. To distalize the maxillary molars. the traditional techniques such as extra-oral traction. Wilson distalizing arches. removable spring appliances and Schwarz plate-type appliances have been used. But, these need considerable patient cooperation. For minimal patient compliance. many practitioners use the pendulum appliances. Several clinical studies demonstrated pendulum is effective molar distalization appliance in the growing patient(using the premolars and the palate as anchorage). But unfortunately, maxillary anterior teeth also shift mesially as the molar moves distally. As a result anchorage loss is occurred. To overcome these disadvantages, we used bone-supported pendulum, combined the conventional pendulum with Skeletal Anchorage System(SAS). The miniscrew was implanted in the anterior paramedian region of the median palatal suture, which has comparatively sufficient bone thickness and is low risk to damage on the dental follicles. We report three cases, using bone-supported pendulum for the maxillary molar distalization in children. After treatment, we find out anchorage stability, minimal unfavorable anterior tooth movement and sufficient molar distalization.