http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
산업부산물을 다량 사용한 콘크리트의 압축강도 발현 특성 검토
김용로,송영찬,박종호,정용,Kim, Yong-Ro,Song, Young-Chan,Park, Jong-Ho,Jeong, Yong 한국건설순환자원학회 2011 한국건설순환자원학회지 Vol.6 No.2
본 연구에서는 산업부산물을 다량으로 사용하는 콘크리트의 건설현장의 구조체 적용을 위한 기초자료를 확보하기 위해 혼화재를 다량 사용한 콘크리트의 압축강도 발현 특성을 검토하였다. 이를 위해 본 연구에서는 일반강도 영역을 대상으로 하여 단위결합재량($310{\sim}410kg/m^3$), 혼화재 치환율(70~90%), 단위수량($140{\sim}150kg/m^3$) 및 양생온도에 따른 압축강도 발현 특성을 검토하였으며, 실제 부재에서의 특성을 검토하기 위해 $2,000{\times}2,000{\times}2,000mm$ 크기의 모의부재를 제작한 후, 수화발열 특성 및 압축강도 발현 특성을 검토하였다. 검토 결과를 토대로, 본 연구에서 검토한 산업부산물을 다량 사용한 콘크리트의 경우 대기온도 평균 약 $13^{\circ}C$ 이상의 양생온도 조건에서는 재령 28일에서 24MPa 이상의 강도를 확보할 수 있는 것으로 나타나, 건설현장에서 골조용 콘크리트로 적용이 가능할 것으로 판단된다. In this study, it was investigated compressive strength generation of concrete using high volume mineral admixture obtaining fundamental data for the application of concrete structure in construction field. For this, it was evaluated compressive strength with unit binder contents($310{\sim}410kg/m^3$), replacement ratio of mineral admixture(70~90%), unit water contents($140{\sim}150kg/m^3$) and curing temperature in the normal strength range. Also, after producing mock-up structure, hydration heat and compressive strength generation was evaluated to examine properties in the concrete member. In case of concrete using a large amount of industrial byproducts which was reviewed in this study, it is possible to secure compressive strength more than 24MPa at age 28days with about $13^{\circ}C$ ambient temperature of curing condition and that is considered to be applied to structure at construction site.
FAX / DATA / 음성 다기능 모뎀 설계와 기능 실현
김용로,유선구,유흥균 ( Yong Ro Kim,Sun Gu Yu,Heung Gyoon Ryu ) 충북대학교 산업과학기술연구소 1996 산업과학기술연구 논문집 Vol.10 No.1
Abstract_Roman In these days, as the technology af Computer and Cornmunication increased, so using PSTN communication service have changed day by days. Existing Computing Environment have the tendency to changing from text to voice and visual, so users d
김용로,공민호,박종호 한국건축시공학회 2016 한국건축시공학회지 Vol.16 No.1
Recently, exposed concrete by machinery trowel is generally used in industrial floor such as warehouse. Also,concrete using only the cement has been mainly used except mineral admixture in order to secure surface abrasionresistance. However, in hot weather construction, it is causing a serious problem such as workability inhibition oftrowel using only ordinary portland cement. Due to this, it was investigated the effect of application of fly-ash andground granulated blast furnace slag on properties and abrasion resistance of concrete for industrial floor in this study. The result of this study, it was confirmed that fly-ash and ground granulated blast furnace slag can be used inconcrete for industrial floor without affecting significantly the properties of concrete. 최근 물류창고 등의 산업용 바닥은 기계식 미장에 의해마감을 하는 노출콘크리트가 일반적인 추세이며, 표면 내마모성 등의 확보를 목적으로 시멘트만을 사용하는 배합이 주로 활용되고 있다. 그러나 하절기 공사시 시멘트만을사용할 경우 응결이 촉진되어 미장작업에 문제를 초래하는 사례가 발생되고 있다. 이에 본 연구에서는 바닥용 콘크리트에 혼화재료로 플라이애시 및 고로슬래그 미분말을적용할 경우 콘크리트 물성 및 내마모성에 미치는 영향을검토하였다. 검토 결과 산업용 바닥 콘크리트에서 콘크리트의 물성에 크게 영향을 미치지 않으면서 플라이애시 및고로슬래그 미분말을 일부 혼입하여 사용할 수 있다는 것을 확인할 수 있었다.
김용로,이재현,민충식,박종호 한국건축시공학회 2014 한국건축시공학회지 Vol.14 No.1
This research examined the effect of the quality of aggregate on concrete workability and compressive strengththrough an investigation into regional aggregate used in domestic ready mixed concrete plants. Through the research,it was found that aggregate for ready mixed concrete shows poor quality overall. The main factor of deterioration inthe quality of the concrete is the particle size of fine aggregate and fine particle content in coarse aggregate. Thequality of aggregate significantly influences concrete’s workability, which is defined based on 0.08mm passage relatedwith powder and absorption. In addition, poor aggregate quality leads to increased water content in concrete to secureworkability, which is related with a decline in the compressive strength and durability of concrete.