http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
슬라이딩 모드와 Neural network 제어기를 이용한 Buck type DC-DC 컨버터의 출력전압제어
황계호,남승식,김동희,배상준,Hwang, Gye-Ho,Nam, Seung-Sik,Kim, Dong-Hee,Bae, Sang-June 한국조명전기설비학회 2004 조명·전기설비학회논문지 Vol.18 No.3
최근, 비선형시스템인 DC-DC 컨버터의 출력전압제어를 위해서 많은 제어방법들이 연구되고 있으며, 본 논문은 Buck type DC-DC 컨버터에 슬라이딩 모드 제어기와 뉴럴 네트워크 제어기를 이용한 제어 알고리즘을 제시하였고, 또한 컨버터의 이론해석을 통한 이론특성과 Psim을 이용한 시뮬레이션특성, DSP(TMS320C32)를 이용한 실험특성을 비교 검토하여 제안한 방법의 유용성을 입증하였다. 기존의 히스테리시스 제어기를 이용한 제어방법과 제안한 슬라이딩 모드 제어기와 뉴럴 네트워크 제어기를 이용한 제어방법과 비교한 결과 제안한 제어기가 우수한 특성을 얻었으며, 향후, 다른 전력변환장치에 유용하게 적용될 것으로 생각된다. A control alogorithm using sliding mode and neural network for Buck type DC-DC converter is presented. Also, we conform a rightness the proposal method by comparing a theoretical values and experimental values obtained from experiment using DSP(digital signal processor). Performance comparisons made with the general hysteresis controller clearly bring out the superior performance of the proposal neural network controller. This paper will be applied to other power conversion system using the proposal neural network controller.
TELM에 적용한 직병렬 공진형 DC/DC 컨버터의 출력전압 제어에 관한 연구
황계호,이영식,전진용,방덕제,김호종,신병철,강도현,김종무,Hwang Gye Ho,Lee Young Sik,Jeon Jin Yong,Bang Deok Je,Kim Ho Jong,Shin Byoung Chol,Kang Do Hyun,Kim Jong Moo 한국반도체디스플레이기술학회 2005 반도체디스플레이기술학회지 Vol.4 No.1
In this paper, with loosely coupled transformer Relies-parallel resonant type DC/DC converter is analyzed and adopted to the power source of a TFLM(Transverse Flux Linear Motor). To get more efficient operating mode of the series-parallel resonant type DC/DC converter, theoretical analysis using normalized parameters are accepted. The analysis includes a specially made ferrite transformer with two separately wound half cores in order to evaluate analytically and experimentally the changes in magnetizing the leakage fluxes and inductances caused by the distance between the halves. The proposed converter must be operated in switching Pattern III among the three switching patterns for the Zero Voltage Switching operation. According to Pulse Frequency Modulation(PFM) control method, the output voltage of the proposed circuit can be controlled. The results of the theoretical development are compared with practical measurements from a prototype system.
PV Module 공정용 Lamination system에 관한 연구
황계호(Gye-Ho Hwang),김원곤(Won-Gon Kim),윤영민(Young-Min Yun),백철준(Cheol-Jun Paik),윤종보(Jong-Bo Yun),문인호(In-Ho Moon),신철수(Cheol-Su Shin),김병수(Byong-Su Kim),이봉섭(Bong-Seob Lee) 한국조명·전기설비학회 2010 한국조명·전기설비학회 학술대회논문집 Vol.2010 No.5월
In recent years research on solar cells and modules made active, while solar cells and modules to produce solar power equipment for the research is lacking. Thus In the paper, the key chapter for the production of photovoltaic modules, technical review of lamination system is designed, manufactured and were localized. using lamination system, Photo voltaic module((10×6: 60cell) 3 sheets can be produced simultaneously with multiple defects were studied
Stocker 시스템에 적용한 비접촉 전원시스템의 효율 개선에 관한 연구
황계호(Gye-Ho Hwang),김원곤(Won-Gon Kim),윤종보(Jong-Bo Yun),문인호(In-Ho Moon),이봉섭(Bong-Seob Lee) 한국조명·전기설비학회 2009 한국조명·전기설비학회 학술대회논문집 Vol.2009 No.5월
최근, LCD(Liquid Crystal Display) 산업에서 클린룸의 규모가 커짐에 따라 Stocker 시스템의 사이즈가 커지고 길이가 장거리화 되고 있다. 이에 제조업체는 생산수율을 높이기 위해 Stocker 시스템의 전체 택타임을 줄이기 위한 방안으로 Stocker 시스템의 속도를 증가시키도록 요구하고 있다. 또한, 제조업체는 고유가 시대에 여러 장비들에 대한 에너지 절약을 통한 공장 운영비용이 최소화되도록 요구하고 있다. 따라서 본 논문은 차세대 Stocker 시스템의 에너지 절감과 이송 속도증가에 따른 비접촉 전원시스템의 최적설계를 제안하고, 에너지 절감을 위한 비접촉 전원시스템의 시제품을 제작하여 부하인 크레인의 여러 운전 패턴에 따른 비접촉 전원시스템의 실증시험과 입/출력 특성, 효율 개선에 따른 비접촉 전원시스템을 개발하여 에너지 절감 효과에 대하여 서술하였다.