http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
연속회분식 장치에서 응집제를 이용한 호기성 입상슬러지 생성 및 특성
이봉섭(Bong Seob Lee),최성우(Seong Woo Choi) 大韓環境工學會 2009 대한환경공학회지 Vol.31 No.12
본 연구는 고분자 응집제를 이용하여 단시간에 입상형태의 슬러지를 제조한 후 연속회분식 장치에 주입하여 호기성 입상화를 시도하였다. 연속회분식 반응조에서 호기성 입자의 형성에 따른 입자의 크기, 침강속도, 표면전하, 비산소 소비율 등의 물리·화학적인 특성을 조사하였다. 입상형태의 슬러지를 연속회분식 장치에 주입하여 COD 부하량 5.4 kg·COD/m3·d로 운전한 결과 운전경과 20일만에 2.6 mm 내외의 호기성 입자를 형성하였으며, 최종형성된 호기성 입자의 침강속도, 비산소 소비율, 표면전하, 다당류/단백질비는 각각 1.7 cm/s, 346 mg·O₂/g·MLVSS·hr, (-)0.26 meq/g·MLVSS, 2.06 mg/mg을 나타내었다. This study was carried out to investigate of aerobic granulation by using sequencing batch reactor(SBR). To make aerobic granular sludge in short period of time, we used polymer. In case of SBR, we have studied on physicochemical characteristics of particle size, settling velocity, surface charge, and specific oxygen utilization rate(SOUR) depending on aerobic particle`s formation. The results of running SBR with 5.4 kg·COD/m3·d of COD loading rate and 20 days reaction time showed that aerobic particle size, settling velocity, SOUR, surface charge, polysaccharide/protein(PS/PN) ratio were 2.6 mm, 1.7 cm/s, 346 mg·O₂/g·MLVSS·hr, (-)0.26 meq/g·MLVSS, and 2.06 mg/mg respectively.
고주파 유도가열용 인버터의 출력제어를 위한 구동신호의 위상 천이에 관한 연구
이봉섭(Lee Bong-Seob),최신형(Choi Shin-Hyeong) 한국산학기술학회 2006 한국산학기술학회논문지 Vol.7 No.4
본 논문에서는 고주파 유도가열용 인버터를 제안하고 인버터의 출력제어에 대해 논하고 있다. 인버터의 출력제어 방법은 스위칭 소자에 인가되는 구동신호의 위상 천이에 따라 출력을 제어하고 있으며, 제안회로의 동작원리와 특성평가는 정규화 파라메타를 도입하여 기술하였다. 또한 회로설계에 필요한 출력특성은 수치해석에 의해 평가 자료를 도출하였고 이론결과와 실험결과를 비교하기 위하여 실험 장치를 제작하였으며 특성평가의 정당성을 입증하였다. This paper proposes high frequency inverter for induction heating and discusses output control of high frequency inverter. Output control method of inverter is controlled by phase shift of switching devices applied to driving signal and the principle and a characteristic estimates of proposed circuit described on normal parameters. Also output characteristics for circuit design presented to numeric analysis and experimental equipment is made to compare theoretical result with an experimental result and an established characteristic estimate.
양방향 통신이 가능한 자동화재탐지설비(P형 1급 수신기)의 설계 및 동작특성에 관한 연구
이봉섭(Bong-Seob Lee),곽동걸(Dong-Kurl Kwak),정도영(Do-Young Jung),천동진(Dong-Jin Cheon) 대한전기학회 2012 전기학회논문지 Vol.61 No.2
In this paper, authors will develop the quick and precise remote controller of automatic fire detection equipment (P-type one-class receiver) based on information communication technology (IT). The remote controller detects the fire and disaster in the building automatically and quickly and then activates the facilities to extinguish the fire and disaster, monitoring such situation in a real time through wire-wireless communication network. The proposed remote controller is applied a programmable logic device (PLD) micom. of one-chip type which is small size and lightweight and also has highly sensitive-precise reliabilities. The one-chip type PLD micom. analyzes digital signals from sensors, then activates fire extinguishing facilities for alarm and rapid suppression in a case of fire and disaster. The detected data is also transferred to a remote situation room through wire-wireless network of RS232c and bluetooth communication, and then the situation room sends an emergency alarm signal. The automatic fire detection equipment (AFDE) based on IT will minimize the life and wealth loss while prevents fire and disaster.
이봉섭(Bong-Seob Lee),김중기(Jung-Ki Kim),김남훈(Nam-Hun Kim) 한국산업융합학회 2002 한국산업융합학회 논문집 Vol.5 No.2
In this paper, the new claw pole type linear stepping motor(CPLSM) is proposed. And the magnetic equivalent circuit of CPLSM is derived by the structure of the CPLSM. The design parameter and the magnetic flux density of CPLSM are performed with three-dimensional finite element method.<br/>
고주파 인버터회로에서 스위칭소자의 구동신호 위상천이에 의한 출력제어
이봉섭(Lee Bong-Seob),최신형(Choi Shin-Hyeong) 한국산학기술학회 2005 한국산학기술학회 학술대회 Vol.- No.-
본 논문에서는 고주파 전류형 인버터를 제안하고 인버터의 출력방법에 대해 논하고 있다. 인버터의 출력제어 방법은 스위칭 소자에 인가되는 구동신호의 위상천이를 부여하여 위상천이에 따라 출력을 제어하고 있으며, 제한회로의 동작원리와 특성평가는 정규화파라메타를 도입하여 기술하였다. 또한 회로설계에 필요한 출력특성은 수치해석에 의해 평가 자료를 도출하고 실험 장치를 제작하여 이론결과와 비교 검토하여 특성평가의 정당성을 입증하였다.
태양광 모듈 제조를 위한 라미네이터의 히팅시스템 제어에 관한 연구
이봉섭(Bong-Seob Lee),황계호(Gye-Ho Hwang) 한국조명·전기설비학회 2018 조명·전기설비학회논문지 Vol.32 No.4
Technology of the laminator equipment, which is the core equipment in the manufacturing process of the solar module, requires a technique of combining the uniformity of the surface temperature of the heater, the degree of vacuum, and the pressure control technology. In terms of users, solar modules tend to have high output and large area. Therefore, this paper designs, manufactures and localized laminator equipments using these core technologies. In addition, for the optimal design of a large-area(3,600mm*2,200mm) heating system to cope with the large-sized solar module, a silicone rubber heater was selected based on heater selection, heater hot wire pattern and heater placement. The proposed silicone rubber heater is a single heater with three hot wire patterns, and the heater size(1,100mm*400mm*1.5mm) is placed with 18ea heaters. As a result of the fabrication and the experiment, the target specification, the starting temperature characteristic, followed the target temperature setpoint within 30minutes. and the temperature deviation from the surface temperature setpoint is within ±2℃.
태양의 입사각에 따른 일사강도와 PV 시스템의 발전량 데이터 분석에 관한 연구
이봉섭(Bong-Seob Lee),곽동걸(Dong-Kurl Kwak),송현직(Hyun-Jik Song),황계호(Gye-Ho Hwang) 한국조명·전기설비학회 2016 조명·전기설비학회논문지 Vol.30 No.5
The energy of the solar radiation emitted from the Sun to the Earth is different in every season. The intensity of solar radiation depends on weather conditions and the angle of incidence and azimuth, the intensity of solar radiation can also affect solar power generation. In this paper, we are considering the inclination of the PV array installed the pyrometer, recently measured the irradiance of 1 year and analyzed the data. As a result, the inclination angle 30 is the highest. And, we analyzed the monthly trend of power generation quantity from PV systems installed, when designing the PV system, demonstrated that the inclination angle of the array is suitable.