http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
피부의 탄성변화에 따른 피부 가압과 복귀시간 측정을 통한 정량적 림프부종 진단 시스템 개발
서종현,조창노,김성천,정승현,고은실,김광기,Seo, Jong Hyun,Cho, Chang Nho,Kim, Sung Chun,Chung, Seung Hyun,Koh, Eun Sil,Kim, Kwang Gi 대한의용생체공학회 2013 의공학회지 Vol.34 No.4
Lymphedema is a phenomenon in which fluid is accumulated inside tissues due to the damaged lymphatic systems. Lymphedema can cause complications such as lymphangitis, infection, changes in skin texture, fibrosis, and lymphangiosarcoma. In this study, a lymphedema screening system based on the elasticity of the skin is proposed to easily quantify lymphedema. The developed probe consists of touch sensors, a load cell and hall-effect sensors to measure the indentation force on the skin and the return time of the skin. The developed system can be used to estimate the change in the elasticity of the skin to quantify lymphedema. The system was tested with a thyroid phantom and gelatin phantoms of different concentrations and the resulting force and the time were recorded. It was found that the increase in the elasticity leads to a higher indentation force and shorter return time. This shows that the developed system can monitor the change in the skin elasticity by measuring the return time and the indentation force. The feasibility of the system in clinical applications will be evaluated in the future study.
허브형 구동모듈 기반의 가변접지 기능을 갖는 전방향 이동로봇
김효중(Hyo-Joong Kim),조창노(Chang-Nho Cho),김휘수(Hwi-Su Kim),송재복(Jae-Bok Song) 대한기계학회 2012 大韓機械學會論文集A Vol.36 No.3
최근에 들어 서비스 로봇의 효율성 향상을 위한 이동로봇에 대한 연구가 활발하다. 이동로봇은 서비스 로봇의 이동성을 향상시킴으로써, 다양한 공간에서 작업을 할 수 있도록 한다. 그러나 기존의 서비스 로봇은 높은 무게중심으로 인하여 작업 중 전복의 가능성이 높다. 또한, 이동로봇에 사용되는 바퀴는 작고 가벼우며, 환경에 따라 바퀴의 종류를 바꿔야 하므로 기존의 허브형 모터는 한계가 있다. 이를 해결하기 위하여 본 연구에서는 이동로봇에 적합한 허브형 구동모듈과 가변접지면 메커니즘을 개발하였으며, 전방향 이동로봇에 적용하였다. 이를 통해 이동성 및 안정성을 향상과 다양한 작업공간에서의 효율성 향상시켰다. 또한 다양한 시험을 통하여 제안한 메커니즘의 성능을 검증하였다. In recent years, an increased amount of research has been carried out on mobile robots to improve the performance of service robots. Mobile robots maximize the mobility of service robots, thus allowing them to work in different areas. However, conventional service robots have their center of mass placed high above the ground, which may cause them to fall when moving at high speed. Furthermore, hub-type actuators, which are often used for mobile robots, are large and expensive. In this study, we propose a mobile robot with a hub-type actuator unit and a variable footprint mechanism. The proposed variable footprint mechanism greatly improves the stability and mobility of the robot, allowing it to move freely in a narrow space and carry out various tasks. The performance of the proposed robot is verified experimentally.