http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이동규,Lee, Dong-Gyu 대한석유협회 1991 석유와 에너지 Vol.1991 No.8
이 자료는 지난 7월 22일 인터콘티넨탈호텔에서 열린 석유협회 주최 간담회에서 발표된 자료를 옮긴 것이다. <편집자 주>
이동규,박제호,정인수,김태만,윤정현,Lee, Dong-Gyu,Park, Jae-Ho,Jung, In-Su,Kim, Tae-Man,Yoon, Jeong-Hyun 한국방사성폐기물학회 2011 방사성폐기물학회지 Vol.9 No.3
사용후핵연료 운반용기 표면온도가 $85^{\circ}C$를 초과할 경우, 대인용 보호막(Personnel Barrier) 또는 운반용 덮개(Transport Hood)를 설치하여 운반 중 운반용기 표면에 사람이 직접 접근할 수 없도록 하여야 한다. 운반용 덮개가 설치된 경우, 열적 안전성 평가의 한 가지 경우인 정상조건 열해석 시, 외부환경 경계조건(환경온도 및 외부복사온도)으로 적용하기 위해서 운반용 덮개 내부 열 환경 조건(내부 공기온도 및 운반용 덮개 표면온도)을 계산해야 한다. 따라서 본 연구에서는 운반용 덮개 내부 공기온도 및 표면온도를 계산하기 위한 해석적 방법 및 열전달 특성에 대한 분석을 수행하였고 CFD 해석 결과와 비교를 통해 타당성을 검증하였다. In case that the maximum temperature of any surface readily accessible during transport of a spent nuclear fuel (SNF) transport cask exceeds $85^{\circ}C$ in the absence of insolation under the ambient temperature of $38^{\circ}C$, personnel barriers or transport hood shall be used to prevent people from casual contact with the transport cask surface. Usually the air temperature within the hood and the hood surface temperature are calculated and further utilized as boundary conditions(free stream temperature and external radiation temperature) for thermal evaluation under normal conditions of transport. In this study, these temperatures are derived using the analytical method based on the heat transfer mechanism around the transport cask under transport hood assuming the thermal equilibrium. By comparing the analytical solutions with the results from the detailed calculations with CFD-computer-code FLUENT 12.1 it is verified that the analytical method is still efficient tool to estimate the temperatures and these temperatures can be further used as boundary conditions for thermal evaluation under normal conditions of transport.
이동규,이두수,Lee, Dong-Gyu,Lee, Du-Su 대한전자공학회 2001 電子工學會論文誌-SP (Signal processing) Vol.38 No.6
기존의 블록 정합 알고리듬에서는 움직임 벡터로 평면적인 움직임만을 기술할 수 있었고 이로 인해 블록화 잡음이 발생하였다 이러한 문제점을 해결하기 위해서 삼각형 메쉬를 이용한 움직임 추정방법이 제안되었다. 영상을 일정한 크기의 삼각형으로 분할하고 같은 연결 상태를 가지도록 하는 정규화 메쉬는 메쉬의 구조를 기술하기 위한 추가적인 정보가 필요 없으나 움직임이 많은 영역과 작은 영역을 같은 크기의 메쉬로 분할함으로써 성능을 저하시키게 된다 본 논문에서는 정규화 메쉬의 형태를 유지하면서 움직임영역에 따라 메쉬의 크기와 연결상태가 가변될 수 있는 동적 정규화 메쉬를 사용한 움직임 추정방법을 제안한다. 실험결과를 통해 제안한 방법이 기존의 블록 정합 방법이나 정규화 메쉬 방법보다 PSNR이 향상된 결과를 얻을 수 있었고 노드의 재정렬시에도 다른 방법보다 초기 수렴속도가 우수함을 알 수 있었다. In Conventional BMA, the motion vector can describe only translational movement and blocking noise is generated. To overcome this defect, motion estimation using triangular mesh has been proposed. The regular mesh is the method of dividing the image area into equal size triangle and haying the same node connection. It has no additional information about mesh structure, but do not reflect the real motion because it represents the regions by equal mesh structure regardless of the amount of motion. In this paper, motion estimation using dynamic regular mesh is proposed, In this method, the mesh structure is varied from the amount of motion and maintain the form of regular mesh. By the simulation, proposed method have better performance in PSNR and is superior to the other method in convergence rate.
수영만 지역의 미세조류로부터 ToxY-PAM을 이용한 조류 대번식 예측을 위한 에코-모니터링
이동규,김무상,프라사드 비노드,조만기,Lee, Dong-Gyu,Kim, Mu-Sang,Jo, Man-Gi 한국해양바이오학회 2011 한국해양바이오학회지 Vol.5 No.4
Phytoplankton forms the base of sea ecosystems. Various environmental factors and anthropogenic pollution, primarily, affect the concentration and photosynthetic activity algal cells, and the changes in the phytoplankton photosynthesis influence other elements of aquatic ecosystems. The increase in anthropogenic pollution markedly damages natural aquatic ecosystems, particularly, in the coastal zones, where an intense blooming of microalgae occurs, including the release of highly dangerous ecotoxic substances of various chemical natures (red tides). In this study, we tried to apply as a parameter for the algal blooming prediction in the ocean from fluorescence values in the taken samples around Busan coastal area. F0 value was almost constant but Fv/Fm value showed the irregular pattern. We presume that these results are due to the changes of the ocean environment and climate. To predict or give early warning the algal blooming, we need to investigate the specific area or fixed area through real-time monitoring. Especially, algal blooming prediction or warning can be achieved via continuously monitoring and interpretation of fluorescence changes.