http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
편광기와 1/4 파장판으로 구성된 출력경과 반도체 포화 흡수체에 의해 Q-스위칭된 Yb:YAG 레이저 출력 특성 연구
안철용,김현철,임한범,김현수,Ahan, Cheol Yong,Kim, Hyun Chul,Lim, Han Bum,Kim, Hyun Su 한국광학회 2014 한국광학회지 Vol.25 No.2
편광기와 1/4 파장판을 이용한 레이저 출력경을 적용한 반도체 포화 흡수체에 의해 Q-스위칭된 Yb:YAG 레이저를 제안하고 그 출력 특성을 조사하였다. 설치된 1/4 파장판의 회전각을 변화시킴으로써 레이저 출력을 가변시킬 수 있음을 보였다. We propose a Yb:YAG laser Q-switched by a semiconductor saturable absorber and a laser output coupler composed of a polarizer and a quarter-wave plate, and we investigate the output characteristics of the proposed Q-switched laser. We show that the laser power can be varied by rotation of the quarter-wave plate.
고속데이터 전송을 위한 Multi-Phased MC-CDMA 시스템의 제안 및 성능 분석
안철용,안치훈,김동구,류승문 한국통신학회 2001 韓國通信學會論文誌 Vol.26 No.12
Multi-Code CDMA (MC-CDMA) 방식은 송신 시 여러 채널의 신호를 동시에 선형적으로 합하여 전송하므로 채널수가 증가할수록 신호의 PAPR(Peak to Average Power Ratio)가 증가하게 되어 증폭기의 비선형 특성에 의해 시스템 성능이 변화한다. 본 논문에서는 다중 레벨 신호에 대한 증폭기의 비선형 왜곡 특성을 분석하고, 증폭기의 비선형 특성에 의한 영향을 최소화하기 위해 다중 레벨 신호를 constant envelope 신호로 변환하는 Multi-Phase CDMA (MP-CDMA) 방식을 제안한다. 또한 다중 레벨 신호의 일정 레벨 이상은 잘라버리는 clipping 방식을 적용함으로써 레벨수의 증가에 따른 성능 저하 및 시스템의 복잡화를 줄이며 이로 인한 시스템 성능의 변화와 요구 전송 속도에 따른 최적의 clipping level을 연구한다. Multi-Code CDMA (MC-CDMA) can not only be integrated easily with a conventional system, but also achieve good spectral efficiency and high processing gain. However, it suffers from high value of peak-to-average power ratio (PAPR). In this paper, we propose the Multi-Phase CDMA (MP-CDMA) system that can provide variable rate service and is not susceptible to the non-linear characteristics of amplifier. The clipping is introduced between at the output of multi-code modulator and at the input of MPSK modulator in order to improve the performance of MPSK chip demodulator and reduce the system complexity, The system performances are compared for the different Number of codes and different clipping levels, respectively. The optimum clipping level is also evaluated for the different number of codes in both, AWGN and frequency flat fading channel.
안철용,김기열,박강민,정은비,이수정,이혜현 한국품질경영학회 2018 한국품질경영학회 학술대회 Vol.2018 No.-
본 발표는 4차 산업혁명시대가 다가 온 현 상황에 발맞춰 나아가야 할 미래농업 모델에 대해 보고한다. 인구비대화와 이상기후라는 경고는 결국 우리에게 식량난이라는 문제로 더 큰 위협을 가하고 있다. 본 연구는 식물공장을 해결책으로 고려하여 성공 사례로 일본의 Fujitsu 사의 모델을 기반으로 우리의 신 모델을 제시하고, 나아가 현 식물공장의 문제점과 더불어 보완점을 제시한다. 현시점에서 식물공장의 문제점은 전력비용, 소비자의 부정적 인식이다. 먼저 전력비용의 문제를 해결하는 방법은 바이오매스 발전을 통해 해결할 수 있다. 다음으로 소비자의 부정적 인식은 디지털 트윈을 통해 가시적으로 소비자에게 보여줌으로써 신뢰성을 확보할 수 있다. 추가적으로 유통 전 까지 과정을 컨베이어 벨트를 이용하여 완전 자동화한다. 이를 통해 작업의 효율성을 증진한다. 이는 식물 공장 내의 신속함을 이끌어내기 때문에 고객 서비스 수준을 높인다.
종 펌핑용 이색거울의 곡률에 따른 Yb:YAG 레이저의 출력특성
안철용,문동준,김명진,김현수,한승완 한국물리학회 2012 새물리 Vol.62 No.2
We investigate the dependence of a output of a Yb:YAG disk laser on the radius of curvature a dichroic mirror used for longitudinal pumping. We also numerically investigate the dependence of the cavity mode size and the pump beam size inside a laser medium on the radius of curvature dichroic mirrors and compare the numerical results with the experimental ones. The designed laser had 26.3 %slope efficiency and a 1.13 M^2. 종 펌핑용 이색거울의 곡률 반경 변화에 대한 Yb:YAG 레이저의출력특성을 조사하였다. 종펌핑용 이색거울의 곡률반경 변화에 따른레이저 공진기 모드와 매질 내의 펌프 빔 크기를 수치적으로 분석하고실험결과와 비교분석하였다. 설계된 레이저 구조에서 얻은 레이저출력의 최대 레이저 기울기 효율은 26.3 % 이고 최대 빔질(M^2)은1.13 이었다.
Order Winners and Order Qualifiers by ISM and MICMAC Analysis-Hanssem
안철용,김연성,이일권,배경미 한국상품학회 2019 商品學硏究 Vol.37 No.4
This study is conducted using the Interpretive Structural Modelling (ISM) and Matriced Impacts Croisés Multiplication Appliquée á un Classement (MICMAC) analysis methods as a way of identifying the strategic advantage requirements of order winners and order qualifiers proposed by Hill for competition in the market. The proposed method is a relatively easy way to evaluate the relationship and interaction of order winners and qualifiers. The proposed method can be used to identify the strategic advantage of the firm in the market. As a case study, Hanssem 's representative customers in the domestic furniture industry were layered and identified in the order winner and order qualifier of the furniture industry. The order winner and order qualifier are layered and analyzed by using ISM analyzer method and MICMAC analysis method which are multi - standard decision method. Order winner and order qualifier in the furniture industry, and presentation of strategic property evaluation method to obtain sustainable competitiveness for small and medium sized enterprises and to suggest managerial implications for development of industry in search of market dominant strategy. The features of this method can be easily applied by the manager and facilitates the identification of strategic advantage requirements, effectively providing the information necessary for the application of the production strategy of the enterprise. The findings of ISM and MICMAC analysis show that the most influential attributes on the customer's choice of Hanssem are low price, reasonable price, overall quality and delivery reliability as order qualifiers, which are the basic conditions for competition. In addition, it was observed that customer's choice is largely influenced by brand image, A / S, design and product diversity as order winners of Hanssem.