http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신영의(Young-Eui Shin),김종민(Jong-Min Kim),김영탁(Young-Tark Kim),김주석(Joo-Seok Kim),한성원(Sung-Won Han) 대한기계학회 2006 대한기계학회 춘추학술대회 Vol.2006 No.6
The 3-dimensional (3D) chip stacking technology is one of the leading technologies to realize a high density and high performance system in package (SIP). It could be found that the advanced process of through-hole via formation with the minimum damaged on the Si-wafer. Laser ablation is very effective method to penetrate through hole on the Si-wafer because it has the advantage that formed under 100㎛ diameter through-hole via without using a mask. In this paper, we studied the optimum method for a formation of through-hole via using various laser heat sources. Furthermore, the processing parameters of the specimens were several conditions such as power of output, pulse repetition rate as well as irradiation method and time. And also the through-hole via form could be investigated and analyzed by microscope and analyzer.
신영화(Younghwa Shin),김동익(Dongik Kim),홍경선(Kyungsun Hong) 한국공학교육학회 2012 공학교육연구 Vol.15 No.6
The purposes of this article are to analyze the conditions of using instructional strategies and using gender sensitive instructional strategies at engineering classes of K University. Qualitative analysis methods were adapted. To achieve the purposes, 35 hours of engineering classes from 11 professors from 9th to 20th of November 2009 were videotaped and analyzed. The research findings were discussed by the checklists for general and gender sensitive the instructional strategies which were recommended for the managing the better classes. Students are influenced by professors not only knowledge and skills but also values and attitudes. Professors who take gender sensitive instructional strategies are expected to give good influence the women students.
초등학교 진로교육의 연구동향 분석: 2007-2016년 발표된 국내학술지를 중심으로
신영순 ( Shin Yung Sun ),고근영 ( Ko Geun Yeong ),전주성 ( Jun Ju Sung ) 서울敎育大學校 初等敎育硏究所 2017 한국초등교육 Vol.28 No.1
이 연구의 목적은 최근 10년 동안 국내 학술지에 게재된 초등학교 진로교육 관련 논문을 분석하여 연구동향을 파악하고, 이를 토대로 향후 연구에 관한 시사점을 모색하는데 있다. 이를 위해 2007년부터 2016년까지 발표된 초등학교 진로교육 관련 논문 108편을 대상으로 하였다. 연구방법은 빈도와 백분율에 의한 기술적 통계와 네트워크 텍스트 분석 방법을 이용하였다. 주요 연구결과는 다음과 같다. 첫째, 연도별 학술지 게재 논문 수는 2010년을 기점으로 증가하다가, 2015년부터는 감소 추세를 보였다. 학술지별로 보면 『실과교육연구』에 편중되어 게재되어 있었다. 둘째, 연구주제는 총 8개 영역 중에서 프로그램 개발 및 효과 검증(28.7%)과 진로발달 행동(26.9%) 영역이 가장 많았고, 검사도구의 개발 및 평가, 진로이론의 적용에 관한 연구는 매우 부족하였다. 셋째, 연구대상은 대부분 학생에 대한 연구(85.0%)였고, 교사와 학부모 대상 연구는 매우 부족하였다. 넷째, 연구방법은 양적 연구(66.4%)가 가장 많이 활용되고 있고, 그 다음으로 실천연구, 질적 연구, 이론연구 등의 순으로 나타났다. 다섯째, 학술지 논문의 초록에 제시된 주제어는`진로교육`이 가장 높은 빈도를 보였고, 이어서 진로성숙, 진로교육 프로그램, 초등학생, 진로발달, 진로인식, 초등교육, 영재 등의 순으로 나타났다. 여섯째, 연구의 주제어 중 연결 중심성이 높은 주제어 39개를 추출하여 네트워크 텍스트 분석을 실시한 결과 주제어 간의 관련성과 연구주제의 최근 경향을 알 수 있었다. 끝으로 이러한 연구 결과를 토대로 향후 우리나라 초등학교 진로교육 연구의 방향에 대해 논의하였다. The purpose of this study was to analyze research trends of elementary school career education published in domestic journals for the last 10 years and to find some implications for future research. For this purpose, 108 research papers on elementary school career education from 2007 to 2016 were reviewed. This study used descriptive statistics by frequency and percentage and network text analysis method. The findings of the study were as follows. First, the number of papers published by year increased from 2010, then declined from 2015, and the number of papers published in "Practical Arts Education" was the highest among the journals. Second, program development and effectiveness verification (28.7%) and career development behavior (26.9%) were the most common research topics. Third, most of the research subjects were students (85.0%), and teachers and parents were very poorly studied. Fourth, the research method trend analysis showed that the highest proportion was in the quantitative research (66.4%), followed by practice research, qualitative research, and theoretical research. Fifth, career education showed the highest frequency as a result of analyzing the keywords presented in the abstract of the paper, followed by career maturity, career education program, elementary school students, career development, career recognition, elementary education and gifted. Sixth, As a result of analyzing the network texts extracted from 39 keywords with high connection centric among the research keywords, the relevance of the keywords and recent trends of the research subjects were found. Finally, based on the results of this study, we discussed the direction of research on career education in Korea.
이중 모드 ADC를 이용한 U-Health 시스템용 맥박수와 맥박파형 검출 회로 설계
신영산(Young-San Shin),위재경(Jae-Kyung Wee),송인채(Inchae Song) 대한전자공학회 2013 전자공학회논문지 Vol.50 No.9
본 논문에서는 수면 중에 사용자의 건강상태를 모니터링 하기 위한 U-health 시스템으로 맥박 수와 맥박 파형 검출 회로를 제안하였다. 제안된 검출 회로의 출력은 배터리의 교체 없이 장시간 사용하기 위하여 건강 상태에 따라 맥박 수 또는 맥박 파형이 선택된다. 이러한 동작을 위해 제안된 신호 검출 회로는 ADC 모드 또는 카운트 모드로 동작하는 이중 모드 ADC와 간단한 디지털 로직으로 구성된 판별기를 사용하였다. 우선 초기에는 카운트 모드로 동작하는 이중 모드 ADC를 통해 4초 동안의 맥박 수를 검출한다. 검출된 맥박수는 판별기에서 1분간 누적한 뒤 건강 상태를 판별한다. 건강 이상 등으로 맥박 수가 설정된 정상 범위를 벗어난 경우 이중 모드 ADC는 ADC 모드로 동작하며 맥박 파형을 1kHz의 샘플링 주파수로 10bit의 디지털 데이터로 변환한다. 데이터는 버퍼에 저장하였다가 620kbps의 속도로 RF Tx를 통해 단말기로 전송한다. 이때 RF Tx는 모드 에 따라 1분 혹은 1ms 간격으로 동작한다. 제안된 신호 검출 회로는 0.11㎛ 공정으로 설계하였으며 460X800 ㎛<SUP>2</SUP> 의 면적을 차지한다. 측정결과 제안된 검출 회로는 1V의 동작 전압에서 카운트 모드에서는 161.8㎼, ADC 모드에서는 507.3㎼의 전력을 소모한다. In this paper, we proposed a readout circuit of pulse waveform and rate for a U-health system to monitor health condition. For long-time operation without replacing or charging a battery, either pulse waveform or pulse rate is selected as the output data of the proposed readout circuit according to health condition of a user. The proposed readout circuit consists of a simple digital logic discriminator and a dual-mode ADC which operates in the ADC mode or in the count mode. Firstly, the readout circuit counts pulse rate for 4 seconds in the count mode using the dual-mode ADC. Health condition is examined after the counted pulse rate is accumulated for 1 minute in the discriminator. If the pulse rate is out of the preset normal range, the dual-mode ADC operates in the ADC mode where pulse waveform is converted into 10-bit digital data with the sampling frequency of 1 kHz. These data are stored in a buffer and transmitted by 620 kbps to an external monitor through a RF transmitter. The data transmission period of the RF transmitter depends on the operation mode. It is generally 1 minute in the normal situation or 1 ms in the emergency situation. The proposed readout circuit was designed with 0.11 ㎛ process technology. The chip area is 460 X 800 ㎛<SUP>2</SUP>. According to measurement, the power consumption is 161.8 ㎼ in the count mode and 507.3 ㎼ in the ADC mode with the operating voltage of 1 V.