A polymeric composite protective layer for stable Li metal anodes

Guo Suogang,Wang Li,Jin Yuhong,Piao Nan,Chen Zonghai,Tian Guangyu,Li Jiangang,Zhao Chenchen,He Xiangming 나노기술연구협의회 2020 Nano Convergence Vol.7 No.21

Lithium (Li) metal is a promising anode for high-performance secondary lithium batteries with high energy density due to its highest theoretical specific capacity and lowest electrochemical potential among anode materials. However, the dendritic growth and detrimental reactions with electrolyte during Li plating raise safety concerns and lead to premature failure. Herein, we report that a homogeneous nanocomposite protective layer, prepared by uniformly dispersing ­AlPO 4 nanoparticles into the vinylidene fluoride-co-hexafluoropropylene matrix, can effectively prevent dendrite growth and lead to superior cycling performance due to synergistic influence of homogeneous Li plating and electronic insulation of polymeric layer. The results reveal that the protected Li anode is able to sustain repeated Li plating/stripping for > 750 cycles under a high current density of 3 mA cm −2 and a renders a practical specific capacity of 2 mAh cm −2 . Moreover, full-cell Li-ion battery is constructed by using ­LiFePO 4 and protected Li as a cathode and anode, respectively, rendering a stable capacity after 400 charge/discharge cycles. The current work presents a promising approach to stabilize Li metal anodes for next-generation Li secondary batteries.

In-pile tritium release behavior and the post-irradiation experiments of Li4SiO4 fabricated by melting process

Zhao Linjie,Yang Mao,Xiao Chengjian,Gong Yu,Ran Guangming,Chen Xiaojun,Li Jiamao,Yue Lei,Chen Chao,Hou Jingwei,Wang Heyi,Long Xinggui,Peng Shuming 한국원자력학회 2024 Nuclear Engineering and Technology Vol.56 No.1

Understanding the tritium release and retention behavior of candidate tritium breeder materials is crucial for breeder blanket design. Recently, a melt spraying process was developed to prepare Li4SiO4 pebbles, which were subsequently subjected to the in-pile tritium production and extraction platform in China Mianyang Research Reactor (CMRR) to investigate their in-situ tritium release behavior and irradiation performance. The results demonstrate that HT is the main tritium release form, and adding hydrogen to the purge gas reduces tritium retention while increasing the HT percent in the purge gas. Post-irradiation experiments reveal that the irradiated pebbles darken in color and their grains swell, but the mechanical properties remain largely unchanged. It is concluded that the tritium residence time of Li4SiO4 made by melt spraying method at 467 ◦C is approximately 23.34 h. High-density Li4SiO4 pebbles exhibit tritium release at relatively low temperatures (<600 ◦C) that is mainly controlled by bulk diffusion. The diffusion coefficient at 525 ◦C and 550 ◦C is 1.19 × 10 11 cm2/s and 5.34 × 10 11 cm2/s, respectively, with corresponding tritium residence times of 21.3 hours and 4.7 hours.

A Spectroscopic Study on Singlet Oxygen Production from Different Reaction Paths Using Solid Inorganic Peroxides as Starting Materials

Li, Qingwei,Chen, Fang,Zhao, Weili,Xu, Mingxiu,Fang, Benjie,Zhang, Yuelong,Duo, Liping,Jin, Yuqi,Sang, Fengting Korean Chemical Society 2007 Bulletin of the Korean Chemical Society Vol.28 No.10

Using solid inorganic peroxides (including Li2O2, Na2O2, SrO2 and BaO2) as starting materials, three reaction paths for singlet oxygen (1O2) production were developed and studied. Their 1O2 emission spectra in the near- IR region and visible region from these reaction paths were simultaneously recorded by a near-IR sensitive Optical Multichannel Analyzer and a visible sensitive Optical Spectrum Analyzer, respectively. The comparison of their 1O2 emission spectra indicated that: (1) in term of the efficiency for 1O2 production, the gasliquid- solid reaction path (in which Cl2 or HCl and H2O reacted with the solid inorganic peroxides suspension in CCl4) was prior to the gas-solid reaction path (in which Cl2 or HCl reacted with the solid inorganic peroxides suspension in CCl4), but was inferior to the gas-liquid reaction path (in which Cl2 or HCl reacted with the solid inorganic peroxides solution in H2O or D2O); (2) the alkali metal peroxides (such as Li2O2 and Na2O2) was prior to the alkaline earth metal peroxides (such as SrO2 and BaO2) as the solid reactants, and Cl2 was favorable than HCl as the gas reactant in efficiency for 1O2 production in these reaction paths.

A Spectroscopic Study on Singlet Oxygen Production from Different Reaction Paths Using Solid Inorganic Peroxides as Starting Materials

Qingwei Li*,Fang Chen,Weili Zhao,Mingxiu Xu,Benjie Fang,Yuelong Zhang,Liping Duo,Yuqi Jin,Fengting Sang 대한화학회 2007 Bulletin of the Korean Chemical Society Vol.28 No.10

Using solid inorganic peroxides (including Li2O2, Na2O2, SrO2 and BaO2) as starting materials, three reaction paths for singlet oxygen (1O2) production were developed and studied. Their 1O2 emission spectra in the near-IR region and visible region from these reaction paths were simultaneously recorded by a near-IR sensitive Optical Multichannel Analyzer and a visible sensitive Optical Spectrum Analyzer, respectively. The comparison of their 1O2 emission spectra indicated that: (1) in term of the efficiency for 1O2 production, the gas-liquid-solid reaction path (in which Cl2 or HCl and H2O reacted with the solid inorganic peroxides suspension in CCl4) was prior to the gas-solid reaction path (in which Cl2 or HCl reacted with the solid inorganic peroxides suspension in CCl4), but was inferior to the gas-liquid reaction path (in which Cl2 or HCl reacted with the solid inorganic peroxides solution in H2O or D2O); (2) the alkali metal peroxides (such as Li2O2 and Na2O2) was prior to the alkaline earth metal peroxides (such as SrO2 and BaO2) as the solid reactants, and Cl2 was favorable than HCl as the gas reactant in efficiency for 1O2 production in these reaction paths.

Dislocation Density-Based Constitutive Model and Processing Map for T2 Copper During Isothermal and Time-Variant Deformation

Gang Chen,Yu Jin,Jing Wang,Cheng Zhang,Qiang Chen,Hongming Zhang,Xingjian Zhao,Zhiyong Li,Changhai Xie,Zhiming Du 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.9

Isothermal compression tests were carried out to study the hot deformation behavior of T2 copper under various conditions. The deformation parameters, such as temperature and strain rate, have strong influence on flow stress and microstructureevolution of the alloy. A unified dislocation density-based model considering dynamic recovery and recrystallization wasestablished. And material parameters of the developed model were optimized by genetic algorithm. Comparisons betweenthe experimental and model data demonstrates that the developed model can precisely describe the flow behavior at quitewide range of deformation conditions. Meanwhile, the designed iterative procedure allows the model to be applied in timevariantdeformation conditions. Processing map and microstructure examination were constructed to optimize the processingwindow of the studied alloy. According to the processing maps, flow instability mainly appeared at low temperatures of500–650 °C and strain rates higher than 0.1 s−1. The optimum deformation parameters of T2 copper was concluded as thetemperature range of 700–800 °C and the strain rate of 0.1–1 s−1.

Effect of Ru crystal phase on the catalytic activity of hydrolytic dehydrogenation of ammonia borane

Chen, Guozhu,Wang, Ruyue,Zhao, Wei,Kang, Baotao,Gao, Daowei,Li, Cuncheng,Lee, Jin Yong Elsevier 2018 Journal of Power Sources Vol.396 No.-

<P><B>Abstract</B></P> <P>Ruthenium (Ru) is one of the most attractive catalysts in the hydrolytic dehygrogenation of ammonia borane. So far, the employed Ru-based catalysts are mainly focusing on hexagonal close packed structured Ru. In this work, we study the crystal phase effect of Ru on the hydrolytic dehygrogenation of ammonia borane, using face-centered cubic structured and hexagonal close packed structured Ru nanoparticles supported on γ-Al<SUB>2</SUB>O<SUB>3</SUB>. The results show that the catalytic activity is different even these two kinds of Ru nanoparticles hold similar size. Impressively, with the Ru particle size change, the variation trend of activity is opposite for face-centered cubic and hexagonal close packed structured Ru/γ-Al<SUB>2</SUB>O<SUB>3</SUB>. Finally, some possible reasons for their difference are proposed based on density functional theory calculations.</P> <P><B>Highlights</B></P> <P> <UL> <LI> The crystal phase effect of Ru on the hydrolysis of ammonia borane was studied. </LI> <LI> The <I>hcp</I> Ru/γ-Al<SUB>2</SUB>O<SUB>3</SUB> exhibits higher activity than that of <I>fcc</I> Ru with similar Ru size. </LI> <LI> The variation trend of activity is opposite with the <I>fcc</I> and <I>hcp</I> Ru size change. </LI> <LI> DFT was used to understand the activity difference between <I>fcc</I> and <I>hcp</I> Ru. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Identification of native charge-transfer status of p-aminothiolphenol adsorbed on noble metallic substrates by surface-enhanced infrared absorption (SEIRA) spectroscopy

Li, Qianwen,Wang, Yanan,Li, Yali,Park, Yeonju,Chen, Yujing,Wang, Xu,Zhao, Bing,Ruan, Weidong,Jung, Young Mee Elsevier 2018 Spectrochimica acta. Part A, Molecular and biomole Vol.204 No.-

<P><B>Abstract</B></P> <P>p-Aminothiophenol (PATP) is a preferred molecule in research on surface-enhanced Raman scattering (SERS) because of its unique characteristics of high spectral activity, easily induced charge-transfer (CT), and sensitivity to molecular structural changes. However, some aspects are still unclear, such as the initial steady state of PATP on noble metallic substrates without strong additional excitation with incident and/or induced electromagnetic radiation. Information about the initial steady state, especially the intrinsic CT state, is of great importance to elucidate the dynamic processes of CT and/or molecular structural changes under additional excitation. To investigate the native state of an adsorbed molecule, a suitable probe method that does not disrupt the native state of the whole system, including both molecules and substrates, is required. SERS is not applied in this context because of its use of high-energy visible and near-infrared light. Herein, a low-energy probe method, surface-enhanced infrared-absorption (SEIRA) spectroscopy, is employed as a suitable method for studying the native adsorption state of PATP on silver nanoisland films. The molecular structure and adsorption state were investigated. The intrinsic CT state received particular attention by analyzing the CT-related vibration of B<SUB>2</SUB> modes. Using Fourier transform infrared (FTIR), transmission SEIRA and reflection SEIRA spectroscopy, we explained why the relative intensities of some bands were different under different conditions. A quasi-standing orientation of PATP adsorbed on the substrates was also confirmed. More importantly, we demonstrated that there is no perceptible CT between PATP and silver nanoisland films; in contrast, CT generally occurs in a disruptive manner in SERS. Density functional theory (DFT) calculations and the selection rules for infrared (IR) transmission and reflection-absorption spectroscopy were used to analyze the spectra throughout the paper. SEIRA proved to be an effective technique to explore the native adsorption state of molecules without the excessive external disturbance induced by excitation. The results are very important in providing insight into molecules in surface-interface chemistry, enhanced spectroscopy and photoelectronics.</P> <P><B>Highlights</B></P> <P> <UL> <LI> The native state of PATP was investigated when adsorbed on silver substrates. </LI> <LI> FTIR and SEIRA allow a probe method with less interference on surfaces. </LI> <LI> The intrinsic charge-transfer state was analyzed through the vibration modes of B<SUB>2</SUB>. </LI> </UL> </P> <P><B>Graphical Abstract</B></P> <P>[DISPLAY OMISSION]</P>

Cordblood-Based High-Throughput Screening for Deafness Gene of 646 Newborns in Jinan Area of China

Shou-Xia Li,Ding-Li Chen,Su-Bin Zhao,Li-Li Guo,Hai-Qin Feng,Xiao-Fang Zhang,Li-Li Ping,Zhi-Ming Yang,Cai-Xia Sun,Gen-Dong Yao 대한이비인후과학회 2015 Clinical and Experimental Otorhinolaryngology Vol.8 No.3

Objectives. Infants with slight/mild or late-onset hearing impairment might be missed in universal newborn hearing screening (UNHS). We identified the mutation hot spot of common deaf gene in the newborns in Jinan area population by screening the mutation spot with neonate cord blood, in order to make clear whether the neonate cord blood for screening is feasible. Methods. Six hundred and forty-six newborns were subjected to both UNHS and genetic screening for deafness by using neonate cord blood. The newborn genetic screening targeted four deafness-associated genes, which were commonly found in the Chinese population including gap junction beta-2 protein (GJB2), gap junction beta-3 protein (GJB3), solute carrier family 26 member 4 (SLC26A4), and mtDNA 12S rRNA. The most common 20 spot mutations in 4 deaf genes were detected by MassARRAY iPLEX platform and mitochondrial 12S rRNA A1555G and C1494T mutations were sequenced using Sanger sequencing. Results. Among the 646 newborns, 635 cases passed the UNHS and the other 11 cases (1.7%) did not. Of the 11 failures, two cases were found to carry homozygous GJB2 p.R143W pathogenic mutation, one case was found to have heterozygous GJB2 235delC mutation, and another one case carried heterozygous GJB3 p.R180X pathogenic mutation. Six hundred and thirty-five babies passed the newborn hearing screening, in which 25 babies were identified to carry pathogenic mutations, including 12 heterozygotes (1.9%) for GJB2 235delC, eight heterozygotes (1.3%) for SLC26A4 IVS7-2A>G, one heterozygote (0.2%) for p.R409H, two homozygotes (0.3%) for m.1494C>T, and two homozygotes (0.3%) for m.1555A>G. Conclusion. Newborn genetic screening through the umbilical cord blood for common deafness-associated mutations may identify carriers sensitive to aminoglycoside antibiotic, and can effectively prevent or delay hearing loss occurs.

Breastfeeding and Ovarian Cancer Risk: a Systematic Review and Meta-analysis of 40 Epidemiological Studies

Li, Da-Peng,Du, Chen,Zhang, Zuo-Ming,Li, Guang-Xiao,Yu, Zhi-Fu,Wang, Xin,Li, Peng-Fei,Cheng, Cheng,Liu, Yu-Peng,Zhao, Ya-Shuang Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.12

The present systematic review and meta-analysis was conducted to assess any association between breastfeeding and the risk of ovarian cancer. A systematic search of published studies was performed in PUBMED and EMBASE and by reviewing reference lists from retrieved articles through March 2013. Data extraction was conducted independently by two authors. Pooled relative risk ratios were calculated using random-effect models. Totals of 5 cohort studies and 35 case-control studies including 17,139 women with ovarian cancer showed a 30% reduced risk of ovarian cancer when comparing the women who had breastfed with those who had never breastfed (pooled RR = 0.70, 95% CI: 0.64-0.76; p = 0.00), with significant heterogeneity in the studies (p = 0.00; I2 = 76.29%). A significant decreasd in risk of epithelial ovarian cancer was also observed (pooled RR = 0.68, 95% CI: 0.61-0.76). When the participants were restricted to only parous women, there was a slightly attenuated but still significant risk reduction of ovarian cancer (pooled RR = 0.76, 95% CI: 0.69-0.83). For total breastfeeding duration, the pooled RRs in the < 6 months, 6-12 months and > 12 months of breastfeeding subgroups were 0.85 (95% CI: 0.77-0.93), 0.73 (95% CI: 0.65-0.82) and 0.64 (95%CI: 0.56-0.73), respectively. Meta-regression of total breastfeeding duration indicated an increasing linear trend of risk reduction of ovarian cancer with the increasing total breastfeeding duration (p = 0.00). Breastfeeding was inversely associated with the risk of ovarian cancer, especially long-term breastfeeding duration that demonstrated a stronger protective effect.

RAPD Variation and Genetic Distances among Tibetan, Inner Mongolia and Liaoning Cashmere Goats

Chen, Shilin,Li, Menghua,Li, Yongjun,Zhao, Shuhong,Yu, Chuanzhou,Yu, Mei,Fan, Bin,Li, Kui Asian Australasian Association of Animal Productio 2001 Animal Bioscience Vol.14 No.11

Relationship among Tibetan cashmere goats, Inner Mongolia cashmere goats and Liaoning cashmere goats was studied using the technique of random amplified polymorphic DNA (RAPD). One primer and four primer combinations were screened. With the five primers and primer combinations, DNA fragments were amplified from the three breeds. Each breed has 28 samples. According to their RAPD fingerprint maps, the Nei's (1972) standard genetic distance was: 0.0876 between Tibetan cashmere goats and Inner Mongolia cashmere goats, 0.1601 between Tibetan cashmere goats and Liaoning cashmere goats, 0.0803 between the Inner Mongolia cashmere goats and Liaoning cashmere goats. It coincides with their geographic location. The genetic heterogeneity of Tibetan cashmere goats, Inner Mongolia cashmere goats and Liaoning cashmere goats is 0.3266, 0.2622 and 0.2475 respectively. It is also consistent with their development history.