중증 허혈성 지체질환 환자에서 시행된 vascular endothelial growth factor의 혈관신생 유전자치료 1예

김현중,장신이,김종묵,김선영,김병문,김원배,김덕경 대한내과학회 2003 대한내과학회지 Vol.64 No.1

저자 등은 기존의 치료에 반응하지 않은 중증 허혈성 지체질환 환자를 대상으로 하여 vascular endothelial growth factor를 이용한 혈관신생 유전자 치료를 시행하였다. 치료 후 환자의 허혈에 의한 하지 통증이 현격하게 감소하고 상처의 진행이 측부혈관이 많이 증가됨이 관찰되어 이에 문헌고찰과 함께 보고하는 바이다. We report VEGF-induced angiogenic gene therapy in a patient with critical limb ischemia, who did not respond to conventional treatment. This patient was the first case in a dose-escalating series of phase I clinical trial. The patient had severe resting pain, gangrene and diffuse ulcer in his left foot. Total 1,000㎍ of naked DNA encoding human VEGF165 was administered intramuscularly to 8 sites of the loft lower extremity. Four weeks after the first 1,000㎛ was administered to the same sites (total dose: 2,000㎛). After gene therapy, resting pain gradually reduced and the amount of analgesics taken by the patient decreased. The ischemic wound of lower extremity slightly improved. However, there was no complete wound healing at 12 weeks of treatment. Digital subtraction angiography at 12 weeks after gene therapy showed an increase in collateral vessels at the mid-tibial, ankle and foot arch levels. Immediately and up to 12 weeks, there was no complication related to gene therapy. These findings may be cautiously interpreted to indicate that intramuscular injection of naked plasmid DNA of VEGF_165 may induce therapeutic angiogencsis in a patient with critical limb ischemia. Further clinical evaluation of VEGF-induced gene therapy is needed to evaluate the safety and efficiency of this treatment.(Korean J Med 64:85-90, 2003)

Productivity Loss of Rheumatoid Arthritis Patients according to the Their Stages of the Disease Activity Score

( Sang-Cheol Bae ),( Jin-Hye Cha ),( Jung-Yoon Choe ),( Sung Jae Choi ),( Soo-Kyung Cho ),( Won-Tae Chung ),( Chung-Il Joung ),( Young-Ok Jung ),( Young Mo Kang ),( Dong-Wook Kim ),( Jinseok Kim ),( Y 대한류마티스학회 2018 대한류마티스학회지 Vol.25 No.2

Objective. Productivity loss was compared by 3-stage of disease activity and associations between higher disease activity and high productivity loss were identified. Methods. Data were extracted from Rheumatoid Arthritis (RA) Patient-reported Outcomes Research, which enrolled 2,000 RA patients (>20-year) on disease-modifying-antirheumatic-drugs (DMARDs) (≥ 6-month) from December 2012 to June 2013. This included 1,457 RA patients with the disease activity score (DAS-28-ESR) in their medical charts. Productivity loss in time and indirect cost was estimated using The World Health Organization Health and Work Performance Questionnaire (HPQ). Baseline characteristics and productivity loss outcomes were compared according to DAS-28-ESR groups. Results. 84.4% were females, 54.2% had low DAS-28-ESR (<3.2), and 38.2% and 7.6% had moderate (3.2∼5.1) and high DAS-28-ESR (>5.1). Patients with moderate to high DAS-28-ESR had higher lost productivity time (LPT) and monthly costs of LPT than those with low DAS-28-ESR (time in hours: 110.0±58.4 vs. 132.4±57.2 vs. 71.5±52.0, p<0.0001; monthly costs of LPT in 1,000 Korean won: 1,097±607 vs. 1,302±554 vs. 741±531, p<0.0001). Multiple regression analyses revealed significant associations with high LPT in high (adjusted odds ratio [OR]=3.87, 95% confidence interval [CI]: 2.18∼6.87) and moderate DAS-28-ESR (adjusted OR=1.88, 95% CI: 1.41∼2.52) compared to low DAS-28-ESR. In addition, positive associations with high monthly costs of LPT were observed in high (adjusted OR=3.45, 95% CI: 1.98∼5.99) and moderate DAS-28-ESR (adjusted OR=1.93, 95% CI: 1.43∼2.54) compared to low DAS-28-ESR. Conclusion. Timely therapeutic strategies should be taken into consideration given that the RA patients with moderate to high DAS-28-ESR showed strong associations with high productivity loss for effective management of RA. (J Rheum Dis 2018;25:122-130)

권역심뇌혈관질환센터 사업의 비용-편익 분석

김병호 ( Byung Ho Kim ),감신 ( Sin Kam ),배상근 ( Sang Geun Bae ),김건엽 ( Keon-yeop Kim ),이원기 ( Won Kee Lee ),홍남수 ( Nam-soo Hong ),박형근 ( Hyeung-keun Park ),이혜진 ( Heyjean Lee ),조은정 ( Eun-jung Cho ),채성철 ( Shung C 한국보건정보통계학회(구 한국보건통계학회) 2017 보건정보통계학회지 Vol.42 No.1

Objectives: This study was conducted to investigate economic feasibility of operating Regional Cardiocerebrovascular Centers using cost-benefit analysis. Methods: The current study assessed cost and benefit data collected from nine hospitals which were designated as Regional Cardiocerebrovascular Centers between 2008 and 2010. Results: The operation of Regional Cardiocerebrovascular Centers reduced mortality rate and length of stay due to acute myocardial infarction and stroke and also decreased disability occurred after stroke. The total calculated cost of operating nine Regional Cardiocerebrovascular Centers was 19.85-22.30 billion won and the minimum benefit calculated was 23.98 billion won. Applying the maximum cost and the minimum benefit, the net benefit was 1.68 billion won, which is estimated to 190 million won per Regional Cardiocerebrovascular Center. Conclusions: The present study revealed that the operation of Regional Cardiocerebrovascular Centers was economically beneficial. The benefit would be larger if intangible benefit such as the long-term effects to community hospitals and enhancement of quality of life of patients and their families are considered.

Clinical significance of HIF-2α immunostaining area in radioresistant cervical cancer (초)

김민규 ( Min Kyu Kim ),( Tae Joong Kim ),( You Young Lee ),( Chel Hun Choi ),( Jeong-Won Lee ),( Duk Soo Bae1 ),( Je Ho Lee ),( Byoung Gie Kim ) 대한산부인과학회 2010 대한산부인과학회 학술대회 Vol.96 No.-

물리치료(학)과 학생들이 지각한 물리치료사의 이미지와 자아존중감과의 관련성 분석

김은애 ( Eun Ae Kim ),이건철 ( Geon Cheol Lee ),배원식 ( Won Sik Bae ),김지혁 ( Chi Hyok Kim ) 대한물리의학회 2013 대한물리의학회지 Vol.8 No.1

PURPOSE: The purpose of this study is to look into relationship between image of physiotherapist and self-esteem of physiotherapy students and desirable image of physiotherapists offer to establish basic materials. METHODS: The subjects of this study are consist of 603 students of department of Physical therapy university and college in Busan and Kim-hae. Data are collected from June 9 to July 9 in 2011 by structured questionnaires. RESULTS: The result are as follows. 1. at the physiotherapist image score, the highest score question is Physiotherapist is specialist(3.45) and the lowest score question is Physiotherapist is treated samely with doctor(2.15). 2. at the self-esteem score, the highest score question is I think that I am at least as valuable as others(3.37) and the lowest score question is I can be poorly sometimes(2.81). 3. at the static results of physiotherapist image score gap by general characteristics, there are significantly different in gender(t=2.27, p=.02), similar profession distinction(t=4.30, p=.00), major satisfaction(t=5.74, p=.00), school system (t=-2.54, p=.01). 4. at the static results of self-esteem score gap by general characteristics, there are significantly different in years (f=5.14, p=.00), gender(t=4.09, p=.00), religion(f=2.87, p=.04), similar profession distinction(t=3.97, p=.00), major satisfaction(t=4.26, p=.00). 5. at the static results of good reputation of physiotherapists increase self-esteem of physiotherapy students score question are significantly different(r=0.53, p=.00). CONCLUSION: Accordingly, these results of this study that there is a very correlation between image of physiotherapist and self-esteem of physiotherapy students. Therefore, good reputation of physiotherapists increase self-esteem of physiotherapy students.

온수배관을 이용한 온실의 난방성능

윤용철(Yong Cheol Yoon),신익수(Yik Soo Shin),김현태(Hyeon Tae Kim),배승범(Seoung Beom Bae),최진식(Jin Sik Choi),서원명(Won Myung Suh) (사)한국생물환경조절학회 2012 생물환경조절학회지 Vol.21 No.2

본 연구는 온실의 난방 에너지 절감을 목적으로 온실 내부에 알루미늄 온수배관을 설치하여 난방효과에 대한 기초자료를 구축하고자 수행되었다. 그 연구결과를 요약하면 다음과 같다. 전체 실험을 포함하여 온실내의 높이별 온도편차는 4.0~7.0℃ 정도의 범위로서 그 차이가 크게 나타났다. 팬코일유니트(FCU)를 작동시킨 경우가 작동시키지 않은 경우에 비해 유출입수의 온도차가 3.3℃ 정도 크고, 소비전력량은 36.2~40.1% 정도 증가하였으며, 시간당 방열량은 44.6~52.0% 정도 증가하는 것으로 나타났다. 실험기간동안 순환유량은 0.48~0.49L · s<SUP>?1</SUP> 정도의 범위에 있었고, 평균유속은 1.53~1.56m · s<SUP>?1</SUP> 정도였다. 유출입수의 평균 온도차는 6.24~11.50℃이었다. 최저 외기온 ?14.0~?0.6℃ 범위에서 설정온도별 방열량은 135,930~307,150㎉ 정도의 범위로서 시간당 9,610~19,630㎉ · h<SUP>?1</SUP> 정도의 범위에 있었다. 이것은 최대난방부하의 약 23~53% 정도의 난방에너지를 공급할 수 있을 것으로 나타났다. 전체 방열량과 소비전력량은 각각 2,548,306㎉ 및 3,075.7㎾h이다. 화석연료인 경유로 난방할 경우, 소요되는 경유의 총 소비량은 281.6L 정도이고 비용은 321,000won인 것으로 나타났다. 농가용 전력요금을 적용하면 전력사용에 대한 총비용은 110,730won 정도로서 경유 소비 비용의 33.5% 정도로 나타났다. 실험구의 온도가 대조구보다 약 8.3~14.6℃ 정도 높게 나타났다. This research was conducted to obtain basic data with regard to the heating performance that would be produced by installing an aluminum hot water pipe inside the greenhouse with the goal of reducing the heating energy in greenhouse. The research results are summarized as follows. The degree of difference in relation to the temperature by height within the greenhouse during the entire experiment was significant - within the range of 4.0~7.0℃. The temperature difference between incoming and outgoing water was about 3.3℃ greater when FCU was activated compared to when it was not activated. Meanwhile, the amount of energy consumed increased about 36.2~40.1%. The amount of pyrexia per hour also increased by 44.6~52.0%. During the experiment period, circulated flux was within the range of 0.48~0.49 L · s<SUP>?1</SUP> while average fluid speed was 1.53~1.56 m · s<SUP>?1</SUP>. The average temperature difference between incoming and outgoing water was 6.24~11.50℃. The amount of heating value by each set temperature within the minimum outdoor temperature range of ?14.0~?0.6℃ was 135,930~307,150 ㎉, and the range was within the 9,610~19,630 ㎉ · h<SUP>?1</SUP> per hour. This demonstrated that about 23~53% heating energy of the maximum heating load could be supplied. Total radiating value and amount of energy consumed were 2,548,306 ㎉ and 3,075.7 ㎾h, respectively. When heating takes place using oil, which is a fossil fuel, the total amount of light oil consumed was 281.6 L while the cost was 321,000 won. When the electricity cost for farms is applied, the total cost was about 110,730 won, which is about 33.5% of the cost required compared to oil consumption. The temperature at in the experiment area was about 8.3~14.6℃ higher compared to that of the control area.

초음파 모터의 위상차 조절과 위상차-주파수 다중 조절에 따른 속도 특성

김동옥,김원배,오금곤,최한수,김영동 조선대학교 에너지.자원신기술연구소 2003 에너지·자원신기술연구소 논문지 Vol.25 No.2

To control the position, velocity and torque of the ultrasonic motor, a great variety of method are proposed such as the amplitude, phase difference, frequency and so on. In the case of phase difference method, it has some advantages; it can control the direction and velocity of rotation only adjusting the phase difference and it has wide control-band. During the USM driving on adjusting phase difference, its characteristic was transformed by the change of resonance-frequency of stator, which means that the resonance frequency is different according to the phase difference. Consequently, we need to set up the most suitable driving frequency according to each phase difference.

설계방식과 주거질 지표에 따른 공동주택 계획기준 개선연구 : 현상설계방식을 중심으로 Focused on Design Competition Method

배웅규,정종대,김원필 대한건축학회 2005 대한건축학회논문집 Vol.21 No.3

This study is aimed at evaluating the current multi-family housing projects under the site planning criteria by examining its application and design process to improve the current criteria. In order to assess the application of the current site planning criteria, two competition schematic designs were compared each other on the same land area. The research found that facilities such as retail shop, security posts, maintenance office, nurseries and libraries were not provided according to the current site planning criteria. In addition, it showed that parking lots and other community facilities did not follow the current site planning criteria but rather changed based upon individual needs. When evaluating the criteria in lieu of the number of residents and unit size, the study found that a block with more residents and smaller unit size (block A) less stringently adhered to the site planning criteria, comparing with a block that has larger unit size and less residents (block B). In order to strengthen the current site planning criteria, seven quality indicators were examined for the evaluation of the competition schematic design by per floor space and per housing unit, verifying that good design also scored well on every quality index. It was also maintained that the need to review the current criteria scope of resident and unit size, along with module size was important for the qualitative housing design.

폐 프리트를 활용한 자기질 타일 소지의 개발

김순기,박민준,배원태 국립경상대학교 공과대학 부설 첨단소재연구소 1992 尖端素材 Vol.2 No.-

The optimum batch formula to obtain the vitreous tile body using the waste frit at 1210℃ was studied. The basic batch formula in this study consisted of 20 wt% Hongkong clay, 10 wt% Hadong kaolin and 70 wt% fluxes. Bobae pottery stone, Gagok feldspar and waste frit were used as fluxes. Surface flatness of the samples, which were fired at 1210℃, were maintained using waste frit up to 40 wt%. The samples with 40 wt% waste frit showed deformation when feldspar content increasd above 25 wt%. When waste frit was used above 30 wt%, water absorption of the samples which were fired at 1210℃ were less than 0.5%. After all the batches were milled so that approxiamtely 1% of residue remained on the 62 ㎛ sieve, samples fired at 1210℃ showed no weight change after abrasion resistance test. The most favorable result was obtained from the sample which contained 35 wt% waste frit, 20 wt% pottery stone, and 15 wt% feldspar. The above sample fired at 1210℃ showed 39.64 MPa of MOR test, about 0.2% of water absorption, and about 4.2% of firing shrinkage.

초경량성 재료인 Mg-10Li-3A1 합금의 TMP 처리를 통한 기계적 특성 향상 방안

김광배,홍준표,김영인,홍원식,배현근 한국 항공대학교 항공산업기술연구소 1998 航空宇宙産業技術硏究所 硏究誌 Vol.8 No.-

초경량 고강도 Mg-10Li-3Al 합금이 용탕단조법에 의해 제조되었다. 주도된 상태의 미세구조는 β상 기지에 균일하게 분포된 AlLi 및 MgAl₂Li를 포함하는 HCP α상과 BCC β상으로 이루어졌다. α상의 초기 결정립 크기는 100㎛였다. Mg-Li 합금에 Al을 첨가하는 것은 용체화 처리 및 시효를 통한 석출 경화에 기인하여 합금의 강도 및 경도를 향상시켰다. 결정립 미세화를 위한 TMP처리가 냉간 가공과 연이은 300℃, 30분 동안의 어닐링에 의해 수행되었다. 결과적으로 나타나는 미세구조는 재결정화되지 않은 α상과 재결정화된 β상으로 이루어졌다. 냉간 가공량이 증가함에 따라 합금의 결정립 크기가 감소하였고, 최종 결정립 크기는 3.5㎛였다. 가공 열처리된 Mg-10Li-3Al합금은 용탕단조된 합금보다 높은 강도와 연신율을 보였다. Superlight and high strength Mg-10Li03Al alloys were fabricated by squeeze casting. The as-casted microstructure was consisted of a mixture of a mixture of HCP α and BCC β phases including AlLi and MgAl₂Li precipitates, which were uniformly distributed in the βmatrix. Initial grain size of α phases was 100㎛. The addition of Al in Mg-Li alloy had improved the strength and hardness due to the precipitation hardening through solution heat treatment and aging. Thermomechanical Processing(TMP) for grain refinement was carried by cold working and immediate annealing for nucleation at 300℃ for 30 minutes. Subsequent microstructure was consisted of unrecrystallized α and recrystallized β phases. The more the amount of cold working increased, the more the grain size of the alloy was decresed. Final grain size was 3.5㎛. Thermomechanically processed Mg-10Li-3Al alloy had higher strength and elongation than as-casted alloy.