경막 내 colistimethate 투여로 치료한 다제 내성 cinetobacter baumannii 뇌실염

홍유아,유진홍,김진진,모은영,안건희,정희경,김진석,이현정,정미향,윤승배 대한감염학회 2009 감염과 화학요법 Vol.41 No.4

Acinetobacter species is a non-fermentative aerobic gram-negative coccobacillus that is an important pathogen found in nosocomial infections. Recently, multi-drug resistant Acinetobacter baumannii (MDR-AB) infections have been increasing and pose a serious problem. Most such infections present as bacteremia, pneumonia, or a wound infection; however, CNS infections are very rare. We herein present a case of ventriculitis caused by MDR-AB in a 37-year old man after a neurosurgical intervention. The patient was successfully treated with intrathecal colistimethate.

유구치 상아질의 각 부위에 적용된 수종의 복합레진 접착제의 미세인장접착강도에 관한 연구

유정은,최영철,최성철,박재홍 大韓小兒齒科學會 2009 大韓小兒齒科學會誌 Vol.36 No.3

본 연구는 유구치 상아질의 각기 다른 부위(표층부, 심층부, 치경부)에서 복합레진 접착제의 접착강도를 비교, 평가하기 위하여 임상에서 흔히 사용하고 있는 서로 다른 4종의 접착방식(3-step total etch: 1군, 2-step total etch: 2군, 2 step self-etch: 3군, all-in-one: 4군)을 적용하고 복합 레진(Light-Core™ Core Build-Up Composite)을 적층한 후, 미세인장접착강도를 비교하였을 때 다음과 같은 결과를 얻었다. 1. 접착방식간의 비교에서 레진의 접착방식에 따른 상아질 각 부위에서의 미세인장접착강도는 제 1군이 표층부에서 뚜렷이 높았으나(p<0.05) 2, 3, 4군은 부위에 따른 차이가 없었다. 2. 부위별 미세인장접착강도를 비교하여 보았을 때 상아질 표층부에서의 미세인장접착강도는 레진의 접착 방식간에 차이가 없었으나, 심층부에서는 2군, 3군, 4군 및 1군의 순으로 나타났고(p<0.05), 치경부에서는 2군과 3군이 1군과 4군에 비하여 현저히 높았다(p<0.05). The purpose of this study was to evaluate the micro-tensile bond strength (μTBS) of four luting resin to regional dentin of human primary teeth. Dentin from non-carious primary molars were prepared from different regions(s, superficial dentin; d, deep dentin; c, cervical dentin), and divided into groups based on anatomical locations and types of luting resins(Scotchbond Multi-purpose: SB ; One-Step: as ; AdheSE Bond: ASE ; G-Bond : GB) : SB-s, SB-d, SB-c; OS-s, OS-d, OS-c; ASE-s, ASE-d, ASE-c ; GB-s, GB-d, GB-c. Luting resins were used according to the manufacturers' instructions, to bond Light-Core™ Core Build-Up Composite) to the exposed dentin specimens in the light-curing mode. After storage for 1 day, μTBS was tested at a cross-head speed of 1 mm/min. Data were analyzed with T-test and two-way ANOVA. The bonding interface and fractography analyses were performed with SEM. The results were as follows : 1. μTBS to superficial dentin was significantly higher than to deep dentin for SB(p<0.05). But there were no significant differences in regional μTBS among as, ASK GB(p>0.05). 2. There were no significant differences in μTBS to superficial dentin among each groups. But, in deep dentin, μTBS of SB-d was significantly lower than those of OS-d, ASE-d, and GB-d(p<0.05). μTBS of OS-d was significantly higher than those of GB-d(p<0.05), but there were no significant differences in μTBS of ASE-d. There were no significant differences among μTBS of ASE-d, OS-d, and GB-d.

한국형 후각검사 KVSS Test의 개발

홍석찬,유영석,김은서,김석천,박수홍,김진국,강성호 대한이비인후과학회 1999 대한이비인후과학회지 두경부외과학 Vol.42 No.7

흡입물질의 위생학적 연구 : 본드 흡입이 흰쥐의 폐 및 기타 장기의 효소 활성에 미치는 영향 The Effect of Bond Inhalation on the Enzyme Activity of Lung and Other Organs in Rat

윤수홍,박은주,이주영,서혜령 효성여자대학교 부설 한국환경위생연구소 1991 환경위생연구 Vol.1 No.1

Toluene, alcohol및 vinylester류 등을 함유하고 있는 bond를 이용하여 휘발성 물질이 생체에미치는 영향을 관찰하기 위하여 rat에 일정 농도의 bond를 일정 시간 흡입시킨 뒤 각 조직에대하여 효소의 생화학적 시험과 celluloseacetate electrophoresis를 실시하여 다음과 같은 결과를얻었다. 1. Bond 흡입은 시간이 증가함에 따라 혈청, 심장, 신장, 근육, 뇌의 ChE 활성을 억제하였으며특히 폐와 간장의 ChE활성에 가장 큰 영향을 나타내었다. 2. Bond 흡입에 의해 혈청 및 각 조직 중에서 LDH활성이 증가되었으며 특히 폐와 심장,근육에서 그 영향이 현저히 나타났다. 3. Celluloseacetate electrophoresis를 통한 각 조직의 LDH isozyme pattern에는 차이가 나타났으며 bond 흡입에 의해 band의 소멸과 선명도의 감소가 일어 났는데 특히 폐에 대한 독성이가장 현저했으며 근육에 대한 독성도 큰 것으로 나타났다. Acute poisoning with organic solvents and other volatile compou-nds now usually follows deliberate inhalation(volatile substance abuse) or inges-tion of these compounds. The effect of bond inhalation was analyzed for serum, liver, lung, brain,heart, kidney and muscle. And the observations are revealed on rat cholinesterase activity, lactatedeh-ydrogenase activity and electrophoretic pattern of lactatedehydrogenase isozyme. The results are as follows ; 1. The rat cholinesterase activity on serum, heart, muscle, kidney and brain showthe decrease by increasing of inhalation time of bond, in particular the lungand liver cholinesterase activity was greatly affected. 2. Bond inhalation brough out the lactatedehydrogenase activity increased ofthe serum and the tissues and had an important effect especially in both thelung and muscle lactatedehydrogenase activities. 3. Each tissue was found to have a characteristic distribution of lactatedehydro-genase isozymes on celluloseacetate elelctrophoresis and the development ofinhalation time is shown the disappearence and diffusion of band.

화해를 입은 콘크리트 기둥의 잔존강도 및 보수ㆍ보강 효과

이창은,이차돈,신영수,홍성걸 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1(구조계)

Experiments were performed for the real sized 13 reinforced concrete columns of 350×350×3360㎜ with normal and high strength concrete in order to observe the fire-damaged residual strength of these columns. Columns were heated according to the ISO heating curve. Main experimental parameters were: magnitude of axial load, heating time, cover thickness, and eccentricity. Effects of these parameters were experimentally quantified. Although significant reduction in residual strength was observed for the columns exposed to longer heating time, little effects on the residual strength by cover thickness and magnitude of axial load were observed. Repairing did not lead to the improvement of residual strength. Strengthening by wrapping the GFRP sheets, however, recovered the fire-damaged column strength up to 97% of axial strength of the prototype undamaged column.

점포내 VMD요소가 SPA 브랜드 정체성에 미치는 영향

김소영, 손지훈, 심효진, 신동훈, 정일호, 홍동우, 김은영 충북대학교 생활과학연구소 2013 생활과학연구논총 Vol.17 No.2

This study was to examine the effect of VMD factors on brand identity for SPA brands. As brand stimulus, four SPA brands(e.g., Basic House, Codes combine, Uniqlo, Zara) were selected by pretest. For collecting data, a self-administered questionnaire was developed based on the literatures and intercept survey was conducted. A total 508 usable responses were obtained from consumers who shopped at the selected brands' stores. For data analysis, descriptive statistics, factor analysis, and regression analysis were used. As perceived by consumers, VMD consisted of seven factors: lightening, scent, color, layout, music, window display, and item presentation. The VMD factor was significantly related to brand identity for the SPA brands. Specifically, brand awareness was predicted by color, layout and item presentation; brand association strength was predicted by color, layout, and widow display; favorable brand association was predicted by item presentation; salience of brand association was predicted by color and music; and brand image association was predicted by color, layout, music, and item presentation. Thus, this study discussed a managerial implication for SPA retailers to develop a visual merchandising strategy in the competitive marketplace.

大學新聞과 一般新聞의 比較硏究 : 그 內容分析을 中心으로 On the basis of the content analysis of the articles

李文浩,洪思滿,呂恩暎 慶北大學校 1982 論文集 Vol.33 No.-

This study was designed to present the desirable leading line of the academic journalism, by comparing the university press with the daily newspapers. Both The Daihak Shinmun, The Korea University Press published in 1981 and The Kyungpook University Times published from 1976 to 1981 were chosen as the reference data for this research. To begin with, the writer educed the four functions of the acadmic journalism from the data, by applying the functions of daily newspapers, mass commanication to the university press. The four functions are like the following. 1. presenting and surveillancing the academic environment. 2. molding and leading the public opinion of university. 3. linking and affiliating the members of university. 4. forming a new standard of value. According to the accomplishment of these function, all the articles appeared in the university press could be sorted out into four patterns, namely, campus news, special reports, special columms, and advertisements. Depending on the examination of the data, the followings can be concluded: 1. Due to the biweekly publishing system, the function of presenting and surveillancing the academic environment can hardly be achieved. 2. Since most articles are written by students, the linking between facutly members and students each other and creating academic culture is not be carried out as required. 3. Running mainly literary works in most columns except editroial, the university press increasingly appears to take the shape of a literary megazine. 4. The commercial advertisements take up too much space and space for news reports is relatively being encroached.

Calcium phosphate 결정 성장 최적화를 위한 Ti 표면의 BaTiO_3 박막 형성에 관한 연구

조진우,양홍서,박영준,황규석,송종은,이용렬 전남대학교 치과대학 2001 구강과학 Vol.13 No.2

This study was purposed to establish an optimized manufacturing process for a negatively charged ferroelectric thin flim on titanium substrate in order to develop a new implant system having the mechanical strength and bone forming ability. Ferroelectric materials show an alignment of positive and negative charges by poling treatment. Based on this property, this study was performed with the assumption that the Ca^2+ ions would be easily attracted on negatively charged surface and the attracted cation might behave as nuclei for bone-like crystal grownth in biological solutions. In order to have an osteoinducibility by the ferroelectric thin film coating, continuous and flawless crystalline thin film should be formed with ferroelectricity, and finally should be adequately poling treated. In this study, BaTiO_3 (BTO) was selected as a ferroelectric material. Before thin film coating process, most favorable poling condition was investiged with the evaluation of the difference in calcium phosphate (Ca-P) formation in simulated body fluid (SBF). Moreover, the parameters to form an optimum thin film were studied. Dense bulk BTO disks were fabricate using cold isostatic pressing(CIP) and sintered in air at 1300℃ for 2 hours. Sintered BTO disk was polished, and he crystallinity, microstructure, and ferroelectric characteristics were evaluated using an X-ray diffraction analysis (XRD), a field emission scanning electron microscope (FE-SEM), and an Impedance analyzer. To find the optimum poling condition for the calcium phosphate crystal formation, sintered bulk BTO specimens were treated with either of following poling conditions; 1) room temperature poling treatment [ polarizing field (Ep) = 25kV/cm, at 25℃ for 2 hours], 2) under Tc medium-temperaturepoling treatment (Ep=20kV/cm, from 85˚C to 25˚C for 2 hour), and 3) above Tc high-temperature poling were immesed in simulated body fluid (SBF) for 30 days, and the formation of calcium phosphate (Ca-P) layer n the surface was evaluated. The crystallinity, microstructure, and ferroelectric characteristic of BTO thin film were evaluated withthe variation of final heat treatment. It was performed after establishing the starting substance-solvent mixing ratio, coating times, and pre-heating temperature optimal to form continuous and flawless BTO thin film adequate for having ferroelectricity. Perparation of BTO thin film was made by dipping-pyrolysis technique using metal naphthenates as starting substances. BTO thin films was spin-coated on Ti substrate by dipping-pyrolysis technique using sol obtained by mixing Ba-naphthenate and Ti-naphthenate as starting substances. Pre-firing temperature of BTO thin film was performed at 450℃ because organic-solvent ws completely volatilized without any crystal growth, and the final heat treatment was performed at 600, 700 or 800℃, respectively. The results are as follows; 1. BTO disk sintered at 1300℃ for 2 hours showed average grain size of about 1㎛ and the relative dielectric constant at 1㎑ was abut 3000∼3500. 2. After immersing the sintered bulk BTO poled at respective conditions in SBF for 30 days, Ca-P layers were present on the negatively charged surfaces. In contrary, positively charged Bto surface did not show any noticeable charge of the surface microstructure after SBF immersion. 3. In he case of poling condition 1 and 2 treated with below Tc, Ca/P ratio showed a relatively low value of 1,.2∼1.5. While, in the case of poling condition 3 treated with above Tc, Ca/P ratio was 1.5∼1.67, which is similar to that of biological apatite. This phenomenon demonstrates that poling the BTO above the temperature of Tc is preferable for the Ca-P formation. 4. For thin film BTO coastin, the starting substance was prepared by an equimolar mixing of the Ba and Ti-naphthenate. Dilution of the starting substance with toluene was most appropriate at sol : toluene ratio of 5.2:4.8 Too thin sol produced porosity in film, and too thick sol resulted cracks in the film. By repeating the coating and pre-firing procedure 15 times, homogeneous film of 0.5㎛ thickness could be fabricated, and perfomed well during the poling treatment without breakdown. 5. The heat-treatmen of the BTO thin film at 700℃ produced a homogeneous crystalline structure without heterogeneous TiO2 formation. The BTO thin film heat-treated at 600℃ showed non-crystallinity and no ferroelectricity. Treatment at 800℃ produced heterogeneous TiO2 phase in the film, which is unfavorabe for having ferroelectricity by the distortion of the perovskite structure. The relative dielectic constant at 1 ㎑ was 152 and 112 by heat-treatment at 700 and 800℃, respectively. In summary, these results demonstrated that poling the ferroelectric B_aT_iO_3 surface negatively is effective for the formation of Ca-P layer in simulated body fluids. Poling condition at a temperature cooling from above Tc down to room temperature is most effective. By optimizing the method of BTO thin film coating on metal substrate for the formation of Ca-P layer, the data of this study might be applied for the manufacture of new bioactive implant system.

n-CdS_(0.46)Se_(0.54)/p-Cu_92-x)S_(0.46)Se_(0.54) 이종접합 태양전지의 제작과 그 특성에 관한 연구

유상하,최승평,이상열,홍광준,서상석,김혜숙,전승룡,윤은희,문종대,신영진,정태수,신현길,김택성,유기수 全北大學校 基礎科學硏究所 1994 基礎科學 Vol.16 No.-

승화방법에 의해 CdS_0.46Se_0.54 단결정을 성장하여 결정구조를 조사하고, Van der Pauw 방법으로 Hall effect를 측정하여 carrier density의 온도 의존성과 mobility의 온도 의존성을 조사하였다. 성장된 CdS_0.46Se_0.54 단결정을 치환반응하여 n-CdS_0.46Se_0.54/p-Cu_2-xS_0.46Se_0.54 이종접합 태양전지를 제작하였다. Spectral response, 전류-전압특성 및 전력변환 효율을 조사하여 그 결과로부터 개방전압은 0.48V, 단락 전류 밀도는 21mA/㎠, fill factor와 전력변환효율은 각각 0.75와 9.5%를 얻었다. CdS_0.46Se_0.54 single crystal was grown by a sublimation method. The crystal structure and the temperature dependence of carrier density and mobility of CdS_0.46Se_0.54 single crystal were studied. Heterojunction solar cells on n-CdS_0.46Se_0.54/p-Cu_2-xS_0.46Se_0.54 were fabricated by the substitution reaction. The spectral response, the J-U characteristics and the conversion efficiency of the n-CdS_0.46Se_0.54/p-Cu_2-xS_0.46Se_0.54 heterojunction solar cells were studied. The open-cricuit voltage, short-circuit density, fill factor and conversion efficiency of n-CdS_0.46Se_0.54/p-Cu_2-xS_0.46Se_0.54 heterojunction solar cells under 80mW/㎠ illumination were found to be 0.48V, 21mA/㎠, 0.75 and 9.5%, respectively.

Forecasting of the 1st Generation of the Rice Leaffolder (Cnaphalocrocis medinalis Guenée) using Sex Pheromone and Degree-day Model

Han Eun Jung,Park Hong Hyun,Cho Jum Rae,Yum Ki Hong,Choi Man Yeong 한국응용곤충학회 2009 한국응용곤충학회 학술대회논문집 Vol.2009 No.05

This study was conducted to evaluate the attractiveness of the sex pheromone trap of Cnaphalocrocis medinalis Guenée as a forecasting tool from 2006 to 2008 in Suwon, Gyeong-gi province and Seosan, Chung-nam province, Korea. The sex pheromone lure was composed of Z11-18:Ald (55㎍): Z13-18:Ald (500㎍): Z11-18:OH (120㎍): Z13-18:OH (180㎍): Z13-18:Ac (55㎍) per a rubber septum, which set in a cylindrical cone trap. The trap catches of male moths was counted on a weekly basis and the lures were renewed every two weeks. The flight activity of C. medinalis moths monitored by the sex pheromone trap revealed two distinct peaks a year in both experimental areas from 2006 to 2008. Degree-days accumulation was calculated using lower developmental threshold (13.3℃) and degree-days (386.4DD) since adults had been first recorded. Estimated adult peak of the first generation was almost coincident with that observed by sex pheromone trap except in Suwon in 2008.