하시모토 병과 동반된 악성 빈혈 1 예

한 호,안명주,최정혜,이창범,이영열,최일영,김인순,이웅수 한양대학교 의과대학 2001 한양의대 학술지 Vol.21 No.2

Pernicious anemia is the most common cause of vitamin B12 deficiency and is caused by autoimmune destruction of parietal cell containing gastric mucosa region. This disease is significantly associated with autoimmune endocrinopathies and anti-receptor autoimmune disease. We report here a case of 26-year old man who was diagnosed pernicious anemia with high level of autoantibody titer (antithyroglobulin antibody 1:25,600 and antimicromosomal antibody 1:6,400) indicating subclinical Hashimoto's thyroiditis. Since other autoimmune diseases are frequently associated with pernicious anemia even without evidence of clinical symptoms, screening test for the presence of autoimmune disease should be evaluated in these patients.

1999년에 발생한 기상재해 유형별 벼 수량반응조사 연구

주영철,임갑준,한상욱,박중수,조영철,김순재 한국농림기상학회 2000 한국농림기상학회지 Vol.2 No.1

The objectives of this study were to investigate weather conditions which induced discolored grains and viviparous germination, and to evaluate yield responses following viviparous germination during mid- and late- ripening stage, the submergence during reproductive growth stage, and lodging in the yellow ripe stage. Weather conditions which caused glume discoloration at heading stage were 21.3-26.4℃ in average temperature, 75.2-98.4% in relative humidity, 19.3 in transpiration coefficient and 10.8-13.8 m/sec. in wind speed. Yield reduction was 26-27% and 10∼17%, respectively, when the glume discoloration rates were 63.2-65.7% and 38.3-45.2%, obviously due to the decrease in percent of fertile grain and ripening ratio. Weather conditions during continuous rain for 7 days were 96% in relative humidity, 18.9℃ in average temperature, 21.9℃ in maximum temperature, and 16.8℃ in minimum temperature, causing the most viviparous germination in Juanbyeo(45.5%), followed by Jinbubyeo(14.5%), Bongkwangbyeo(14.2%), and Obongbyeo(12.6%). Lateral tillers started to occur when the submergence at the depth of 1.5-2 m lasted one day during the reproductive growth stage. The submergence for 2-3 days at 3-4 m of water depth induced 269-571 lateral tillers/㎡, supporting 32-52% of the total yield. The rice yield in the paddy fields which were left under the lodging conditions until harvesting was not different compared to that of the paddy fields which were kept upright by tieing them together after lodging, but perfect grain ratio decreased about 9.1% in the transplanting culture and 12.5% in the direct seeding culture on dry paddy field because of the increase in immature grains.

미만성 경화 아형 갑상선 유두암 1예

최정민,이송주,김부경,최영식,박요한,김정훈,허방 고신대학교 의과대학 2009 고신대학교 의과대학 학술지 Vol.24 No.1

The diffuse sclerosing variant (DSV) is a rare malignant tumour that accounts for 0.7-5.3% of all papillary thyroid cancers. DSV tends to occur at a younger age and has a higher incidence of cervical lymph node metastases, compared with papillary thyroid carcinoma. A 62-year-old female patient diagnosed thyroid nodule with diffuse and mild increased 18F-deoxy-glucose (FDG) on FDG positron emission tomography (PET)-computed tomogram (CT) scan. The ultrasound images showed typical findings of DSV such as diffusely enlarged thyroid lobes and diffusely scattered microcalcification. We performed this patient ultrasonography guided fine needle aspiration and cytologic analysis revealed papillary carcinoma. Total thyroidectomy with central compartment node dissection and lateral lymph node dissection was performed and finally diagnosed DVS. The authors report this case with literature review.

다중 제어루프에 의한 자기부상용 DC-DC 전원장치에 관한 연구

조주현,조정민,전기영,이상집,이승환,오봉환,이훈구,한경희 明知大學校 産業技術硏究所 2004 産業技術硏究所論文集 Vol.23 No.-

The author present a modified multi-loop algorithm including feedforward for controlling a 55kW step down chopper in the power supply of Maglev. The control law for the duty cycle consists of three terms. The first is the feedforward term which compensates for variations in the input voltage. The second term consists of the difference between the slowly moving inductor current and output current. The third term consists of proportional and integral terms involving the perturbation in the output voltage. This perturvation is derived by subtracting the desired output voltage from the actual output voltage. The proportional and integral action stabilizes the system and minimizes output voltage error. In order to verify the validity of the proposed multi-loop controller, simulation study was tried using Matlab simulink.

노랑제비꽃 자생지의 생육환경과 토양환경간 상관성

유주한,정성관,박경훈,김경태,이우성 慶北大學校農業科學技術硏究所 2007 慶北大農學誌 Vol.25 No.-

This study was carried out to offer the raw data of floricultural resource by scientific analyzing the growth and soil environment in Viola orientalis habitat, and establish the ecological characteristics in developing the relative model. In the results of soil factors analysis, there showed that acidity was pH 5.1, organic matter content of 9.1 %, available P₂O_(5) of 40.6mg/kg, exchangeable K^(+) of 0.2cmol^(+)/kg, exchangeable Ca^(2+) of 3.5cmol^(+)/kg, exchangeable Mg^(2+) of O.8cmol^(+)/kg, cation exchange capacity(C.E.C) of 13.7 cmol^(+)/kg and electrical conductivity(EC) of 0.4dS/m. The growth characteristics were surveyed that height was 12.4cm, leaf width of 2.5cm, leaf length of 3.0cm, flower width of 2.5cm, peduncle of 2.3cm and chlorophyll of 38.5pg·mg^(-1).

GIS와 데이터베이스를 이용한 가로수정보 관리프로그램 구축

김희년,정성관,박경훈,유주한 경북대학교 농업과학기술연구소 2008 慶北大農學誌 Vol.26 No.-

The purpose of this research is to develops street trees management program for more an effective street trees management. The principal point of this program is to relate spatial data and attribute data that is the main concept in GIS(Geographic Information System). To do this function, MapObjects which is ESRI's mapping and GIS components was used to process spatial data and Access which had been developed by MS was used to manipulate attribute data in this program. Visual Basic also was used to design and develop user interfaces and procedures, relate two sort of data , and lastly complete Application. Relational data model was adopted to design tables and their relation, Antenucci's GIS development model was selected to design and complete this program. The configuration of this application is composed of management data and reference data. The management data includes the location of street tree, a growth condition, a surrounding environment , the characters of tree, an equipments, a management records and etc. The reference data include general information about tree, blight and insects.

실적공사비 적산제도 표준화를 위한 예정가격 산정 : 학교공사를 중심으로

박금순,정성관,박경훈,유주한 경북대학교 농업과학기술연구소 2008 慶北大農學誌 Vol.26 No.-

Introduction of construction cost estimating system is necessary to promote appropriate reflection of construction cost and simplified and efficient amount work. The results of this study are as follows. In the results of considering the basic concept and composition of a construction type estimating system, an example orders are concentrated on an apartment house in the country. The building appurtenant work of extension work is high(1.52) as compared with others. In regression analysis for a construction cost, the models are as follows. In a new construction work, (construction cost)=12,004.8+4.09×(bui1ding area), and in extension work, (construction cost)=-121.9+4.50×(bui1ding area). Accordingly, this study wishes to compare and analyzes main contents of original cost method and results cost method, and propose predetermined amount estimation device through existent literature study investigation for accumulation of the construction cost.

병렬 기구 공작 기계의 머신 시뮬레이션에 관한 연구

김기욱,정윤교,고해주,신혁,유한식 한국공작기계학회 2006 한국공작기계학회 추계학술대회논문집 Vol.2006 No.-

Recently, parallel kinematic machine tool with high accuracy and stiffness is causing great concern in 5-Axis processing which is applied in manufacturing with complicated shape products. However, there are some inherent difficulties in parallel kinematic machine tool such as a collision between workpiece and tool, over-cut and under-cut, verification of tool path route in progress. To solve these problem in advance, it needs machine simulation of parallel kinematic machine tool above all things. the purpose of this study is, therefore, carried out machine simulation for parallel kinematic machine tool and accumulation of technical knowledge for the productivity and efficiency in parallel kinematic machine tool through verification of 5-Axis machining.

보문 : 버섯 세균성갈색무늬병원균(Pseudomonas tolaasii)의 분비 독소(tolaasin)를 저해하는 미생물 Pseudomonas sp. HC1

이찬중 ( Chan Jung Lee ),유영미 ( Young Mi Yoo ),한주연 ( Ju Yeon Han ),전창성 ( Chang Sung Jhune ),정종천 ( Jong Chun Cheong ),문지원 ( Ji Won Moon ),서장선 ( Jang Sun Suh ),한혜수 ( Hye Su Han1 ),차재순 ( Jae Soon Cha ) 한국균학회 2013 韓國菌學會誌 Vol.41 No.4

A Gram-negative bacterium was isolated from mushroom media that markedly reduces the level of extracellular toxins (i.e., tolaasins) produced by Pseudomonas tolaasii, the most destructive pathogen of cultivated mushrooms. The HC1 strain was selected as detoxifying tolaasin by bioassay on potato and it was identified Pseudomonas sp. by the cultural, morphological and physiological characteristics, and analysis of the 16S rRNA.. The isolated bacterium is saprophytic but not parasitic nor pathogenic to cultivation mushroom. The isolated bacterium for P. tolaasii cell, was sufficient for detoxification in vitro. Inoculation of the isolated bacterium prevents the development of bacterial disease in Pleurotus ostreatus, Flammunia velutipes and Agaricus bisporus. Control efficacy of brown blotch of strain HC1 treatment was 69, 68 and 55% on Agaricus bisporus, Flammulina velutipes and Pleurotus ostreatus, respectively. The suppressive bacterium may be useful in future for the development of biocontrol system and the construction of genetically modified edible fungi resistant to the disease caused by P. tolaasii.

NC 선반의 직선 사이클 평면 위치결정 정도 측정 및 분석

김영석,정정표,한지희,윤원주 朝鮮大學校 機械技術硏究所 2003 機械技術硏究 Vol.6 No.2

It is very important t o measure linear cycle plane positioning accuracy of NC lathes because the plane positioning accuracy affects accuracy, performance, interchange-ability and quality of machine parts machined by the NC lathes in industries. Until now, linear cycle plane positioning accuracy test of NC lathes has not been carried out because the two axes of NC lathe are moving simultaneously crossing a t right angle each other. while positioning accuracy test of one axis of NC lathe is briskly carried out using a laser interferometer system in industries. So, in this study, a measuring units system to measure simultaneously two axes' plane. positioning accuracy of NC lathe was composed of two optical linear scales installed on the. z and x-axis of work coordinate system on NC lathe and a computer inserted with PC counter card enables to obtain measuring data. Here, ATC(Automatic Tool Changer) and moving part of linear scale are fixed with magnet bases in order to measure displacement of the ATC of NC lathe. And next, computer software was developed in order to measure the lathe under resolution of 0.1㎛ by the linear scales, and also computer soft measuring data could be modeled on plots and be analyzed to numerically.