http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고태조,정병묵,양현모,박종권 한국공작기계학회 2008 한국공작기계학회 추계학술대회논문집 Vol.2008 No.-
High precision machining technology has become one of the important parts in the development of a precision machine. Such a machine requires high speed on a large workspace as well as high precision positioning. For machining systems having a long stroke with ultra precision, a micro stage system with lever mechanism is proposed in this paper. The proposed micro stages are activated by the piezo-actuators with high precision, however, they have severe disadvantage for the travel range that the stroke is limited to a few microns. Because it is not easy to increase the stroke of piezo-actuator, it is very difficult to make an X-Y stage with only piezo-actuators. Therefore, in order to increase it, this paper proposes a lever mechanism for the piezo-actuator stage. In the experiments, we can confirm that the stroke is increased more than three times and it is possible to implement the micro X-Y stage using piezo-actuators.
찰옥수수연구 XVIII 시설하우스에서 2기작 찰옥수수 교잡종의 주요 생육특성 비교
나웅현,복태규,고혁수,백승우,조양희,이희봉 충남대학교 농업과학연구소 2013 농업과학연구 Vol.40 No.2
The major characteristics of the developed corn hybrids were compared at each different planting time; 1st time(April 28) and 2nd time(August 20), respectively. Among traits surveyed, stem height showed highly at 1st time than 2nd, while ear height, stem diameter and ear length were similar at two times. Sugar content of the used hybrids showed highly at 2nd planting time than 1st. Pericarp thickness was also high at 2nd planting time. Especially, among hybrids CNU99 was the highest in stem height and ear length, CNU11 and CNU56 were high in sugar content, and CNU51 and CNU124 were thiner than other hybrids in pericarp thickness. Accordingly, these hybrids will be planted and recognized in 2nd yield trial for superior corn hybrid selection.
비접촉식 측정데이터를 이용한 근사 곡면 생성 및 영역화
김재현,박정환,고태조,유우식 嶺南大學校 工業技術硏究所 2001 工業技術硏究所論文集 Vol.29 No.2
As well known, the non-contact measuring method via the laser scanning or vision system provides vast amount of measuring points by which we rapidly identify the overall shape. On the other hand, its measuring accuracy (resolution) may be lower than that of touch probing method. From the reverse engineer's point of view, it is meaningful and efficient to fully utilize the merits of each methodology. This paper describes the construction of an overall approximate surface model by the non-contact measurement data (cloud-of-points), and the segmentation scheme for identifying sub-areas which should further be digitized by a scanning touch probe. The segmentation is performed through extracting the featured boundary edges or shapes (sharp edges or blend surfaces) by a pencil curve tracing algorithm.
Interleukin-2와 결핵균 30 kDa 항원이 구개편도 및 말초혈액 T 세포 증식에 미치는 상승효과
박정규,박찬권,조은경,김화중,백태현,고필준,김병국,남부현,나기상,박찬일 충남대학교 의과대학 지역사회의학연구소 1995 충남의대잡지 Vol.22 No.1
Widespread use of BCG has not controlled tuberculosis, and more effective vaccines are clearly needed. Although chemotherapy will remain the mainstay of antituberculosis treatment, the use of adjunctive immunotherapeutic modalitites is attractive, particularly in persons with drug-resistant tuberculosis. Administration of IL-2 or IFN-γto tuberculosis patients enhance bacillary elimination. Cell-mediated immunity is the critical protective immune response in tuberculosis. Mycobacterial antigens are recognized by T cells and that elicit production of protective cytokines are potentially important vaccine antigens. The 30 kDa antigen is secreted in large quantities by growing mycobacteria. That antigen elicits greater proliferation in lymphocytes from healthy tuberculin reactors than healthy tuberculin nonreactors. In this study, the T lymphocyte proliferative responses to 30 kDa antigen from Mycobactrium tuberculosis H37Rv were examined by using tonsilar and peripheral blood lymphocytes from PPD(+) and PPD(-) tonsilectomized persons. When cultured with 30 kD antigen, tonsilar mononuclear leukocytes and T cells of PPD(+) demonstrated more ^3H-thymidine incorporation than PPD(-) persons (stimulation index was 2.5 and 1.9, 0.8 and 1.0, repectively). Peripheral blood mononuclear cells (PBMC) and peripheral blood T lymphocytes were shown the similar responses to this antigen. The combination of IL-2 and 30 kDa antigen elicited a significant proliferative responsiveness in tonsilar mononuclear leukocytes and T cells of PPD(+) persons (SI was 20 and 14.1). PBMC and peripheral blood T cells of PPD(+) persons were also shown a significant responsiveness, but PPD(-) persons did not show. These results demonstrate that the 30 kDa antigen and IL-2 have a synergistic stimulatory property in mycobacteria sensitizing lymphocytes.
정종윤,황영수,이춘만,정원지,고태조 한국공작기계학회 2003 한국생산제조학회지 Vol.12 No.4
The properties of a machine tool greatly affect machining quality since a machine tool has large variance in its features. Machine tool makers want to find best machining condition with the one that they have built. Machine builders need to develop test specimen since it helps finding characteristics of machine tools when the machining properties of the specimen are analyzed. This paper develops test specimen to identify features of the main spindle, the feeding device, and the frame of a machine tool. The specimen is machined with a high speed machine and the features of the machine are analyzed with test items. They are surface roughness, overshoot in axial movement, errors in circular movement, feeding with small movement, and compensational error. This work can improve usability for a machine tool in machining practice.
Ko, Tae-Jo,Kim, Jong-Han,Yoon, In-Joon 한국정밀공학회 2009 International Journal of Precision Engineering and Vol.10 No.4
The powder injection molding (PIM) technique is a manufacturing process that combines the versatility of plastic injection molding with the strength and integrity of machined, pressed, or otherwise manufactured small, complex, metal parts. When metal products are manufactured using injection molding, the process is both cost effective and time efficient. Nowadays, small metal products are manufactured using powder injection molding. Conventionally, cutting tools, such as endmills, are manufactured using a grinding process, because cutting tool materials are hard and have a high mechanical strength as well as a complex shape. To reduce the grinding time for the flute of an endmill, we suggested using an endmill blank method, where the flute is fabricated using PIM before edge grinding. This paper also describes how to finish the remainder of the cutting processes and discusses the performance of the formed cutting tool compared with a conventional tungsten carbide tool.
고태조(Tae Jo Ko),한두섭(Do Sup Han),구강(Qiu Kang),박종권(Jong-Kweon Park) Korean Society for Precision Engineering 2014 한국정밀공학회지 Vol.31 No.5
Surface texturing is a machining process on the surface to give engineering functions. The representative process of the surface texturing is lotus effect to give hydrophobic property by the lithography and chemical etching, which is the bio mimic from the nature. Surface texturing can be manufactured by a lot of processes, in particular using mechanical method such as a precise diamond turning, grinding, rolling, embossing, vibrorolling, and abrasive jet machining (AJM). Among them, the grinding process is notable in terms of the wide range of texturing area and fast processing time. The patterning by grinding is done by the grooved grinding wheel on the work piece. In this case, the pattern shape is determined by the grinding conditions as well as the wheel dressing conditions. In this paper, experimental study on the pattern shapes were done and provide the feasibility in use for the large area patterning.