Inter‑diffusion Based Analytical Model for Growth Kinetics of IMC Layers at Roll Bonded Cu/Al Interface During Annealing Process

Fu‑an Hua,Hong‑wu Song,Tao Sun,Jian‑ping Li 대한금속·재료학회 2020 METALS AND MATERIALS International Vol.26 No.3

A model based on inter-diffusion theory was established to predict growth kinetics of the intermetallic compounds (IMCs)formed in roll bonded Al/Cu sheets during annealing process. The model can give good prediction of both IMC layers growthkinetics and element concentration distribution at the interface of roll bonded Cu/Al sheets with different thickness underdifferent annealing conditions with certain roll reduction range. It is revealed that the calculated results of the proposedmodel are depended on the inter-diffusion coefficient of each components, which could be related to the interface bondingstate, i.e., bonding methods or rolling reductions for roll bonding. And there was big difference in inter-diffusion coefficientof Al and Cu matrix under different bonding state, while the inter-diffusion coefficient of IMCs changed slightly.

Tracheal Membrane Rupture as the Cause of Pneumomediastinum in a Patient with COVID-19

Fu Bao,Hu Jie,Chen Tao,Fu Xiaoyun 대한영상의학회 2022 Korean Journal of Radiology Vol.23 No.4

.

Late Ordovician provenance and depositional setting in the southwestern Ordos Block, China: constraints from zircon U-Pb geochronology

Fu Yang,Gang Chen,Yu Kang,Dongmin Ma,Qilin Chen,Tian Tao,Fu Deliang 한국지질과학협의회 2020 Geosciences Journal Vol.24 No.2

The U-Pb ages of single zircon grains contained in the sandstone samples were analyzed by the LA-ICP-MS method, the sediment provenances and geological significance were discussed. The LA-ICP-MS zircon U-Pb dating from the sandstones, tuffaceous sandstones and volcanic tuffs of the Pingliang and Zhaolaoyu Formations along the southwestern Ordos Block are used to limit the maximum depositional age and material sources. The results show that: (1) The youngest ages of zircon dating in the three samples are 445 Ma, 444 Ma and 443 Ma, respectively, suggesting that the studied Formations were deposited in the Late Ordovician. (2) The detrital zircon U-Pb age analysis of the sandstones sample from the Pinliang Formation clustered in the 445–477 Ma, 588–1548 Ma and 1612–2496 Ma with the corresponding youngest peak age of 454.5 ± 3.3 Ma. (3) The distribution of zircon U-Pb age in sandstone samples showing that the sedimentary rocks detritus was mainly sourced from the North Qinling-Qilian terranes and the NCC, and has double provenance supply in the north and south. The material source of the tuffaceous sandstones and volcanic tuffs mainly comes from the volcanic and magmatic activity related to the North Qilian-North Qinling Island Arcs.

Localization of QTLs for Husk Proportion and Lignin Content Using a High-Density Genetic Linkage Map of Brassica napus

Fu You Fu,Lie Zhao Liu,You Rong Chai,Li Chen,Tao Yang,Ai Fen Ma,Cun Ming Qu,Lin Jiang,Zheng Sheng Zhang,Jia Na Li 한국유전학회 2007 Genes & Genomics Vol.29 No.3

Husk proportion (HP) and lignin content (LC) are two important traits of seed quality of B. napus. Efficient selection of these two traits is an important way to improve the seed quality in meal improvement. A set of recombinant inbred lines (RILs) of B. napus (GH06 × Zhongyou 821) was used for mapping QTLs of HP and LC in a two-year study in different environments. 509 markers (78 SSR markers, 66 RAPD markers and 365 SRAP markers) were mapped on 26 linkage groups with an average length of 73.96 cM. The map covered a total of 1923 cM, and the average distance between two adjacent markers was 3.78 cM. Analysis of variance of LC and HP indicated that. LC might not be significantly affected by environment (F = 2.96 < 3.02) and HP might be affected by genotype × environment interactions. A total of 15 significant QTLs were detected in eight linkage groups with a LOD threshold value of 2.5 (LR ≥ 11.5) by CIM, explaining 4.99-16.14% of phenotype variation. Some QTLs of LC and HP were detected in near regions of the same linkage groups, such as qLCBB05-6-1 and qLCWZ06-6-1, qLCBB05-10-2 and qLCBB06-10-1 and qLCWZ06-10-2, qHPBB05-9-3 and qHPBB06-9-1, qHPBB05-10-4 and qHPBB06-10-2 and qHPBB06-10-3 and qHPWZ06-10-1. This study indicates that the repeatedly detected QTLs of LC and HP might be major-effect QTLs of LC and HP.

Effect of Molybdenum and Chromium on Hardenability of Low-Carbon Boron-Added Steels

( Fu Tao Han ),( Byoung Chul Hwang ),( Dong Woo Suh ),( Zuo Cheng Wang ),( Duk Lak Lee ),( Sung Joon Kim ) 대한금속재료학회 ( 구 대한금속학회 ) 2008 METALS AND MATERIALS International Vol.14 No.6

The hardenability of low-carbon boron-added steels containing molybdenum or chromium was studied using dilatometry, thermodynamic calculations, and secondary ion mass spectroscopy (SIMS). The combined addition of boron and molybdenum was found to be more effective than that of boron and chromium in enhancing the hardenability of boron-added steels. In particular, the addition of 0.5 wt.% molybdenum to the boron-added steel almost completely suppressed the formation of polygonal ferrite even at a slow cooling rate of 0.5℃/s. The synergistic effect of the combined addition of molybdenum and boron is thought to be due to both the suppression of M23(C,B)6 precipitation resulting from the deterioration of phase stability and the reduction of carbon diffusivity by the molybdenum addition.

S100A14 Promotes the Growth and Metastasis of Hepatocellular Carcinoma

Zhao, Fu-Tao,Jia, Zhan-Sheng,Yang, Qun,Song, Le,Jiang, Xiao-Jing Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.6

Background: S100A14 has recently been implicated in the progress of several types of cancers. This study aimed to investigate the clinical significance and possible mechanisms of action of S100A14 in the invasion and metastasis of hepatocellular carcinoma (HCC). Methods: S100A14 expression in HCC was detected at mRNA and protein levels and its prognostic significance was assessed. Functional roles of S100A14 in HCC were investigated using MTT, BrdU, wound healing, transwell invasion assay and HCC metastatic mouse model. Results: S100A14 was significantly elevated in HCC tissues, correlated with multiple tumor nodes, high Edmondson-Steiner grade and vascular invasion. Multivariate Cox analysis showed that the S100A14 expression level was a significant and independent prognostic factor for overall survival (OS) of HCC patients (hazard ratio=1.98, 95% confidence interval=1.14-3.46, P=0.013). S100A14 promoted cell proliferation, invasion and metastasis of HCC in vitro and in vivo. Conclusion: These results suggest S100A14 is a novel prognostic marker and therapeutic target for HCC.

An efficient protocol for Agrobacterium-mediated transformation of the biofuel plant Jatropha curcas by optimizing kanamycin concentration and duration of delayed selection

Qiantang Fu,Chaoqiong Li,Mingyong Tang,Yan-Bin Tao,Bang-Zhen Pan,Lu Zhang,Longjian Niu,Huiying He,Xiulan Wang,Zeng-Fu Xu 한국식물생명공학회 2015 Plant biotechnology reports Vol.9 No.6

Jatropha curcas is considered a potential biodiesel feedstock crop. Currently, the value of J. curcas is limited because its seed yield is generally low. Transgenic modification is a promising approach to improve the seed yield of J. curcas. Although Agrobacterium-mediated genetic transformation of J. curcas has been pursued for several years, the transformation efficiency remains unsatisfying. Therefore, a highly efficient and simple Agrobacterium-mediated genetic transformation method for J. curcas should be developed. We examined and optimized several key factors that affect genetic transformation of J. curcas in this study. The results showed that the EHA105 strain was superior to the other three Agrobacterium tumefaciens strains for infecting J. curcas cotyledons, and the supplementation of 100 mM acetosyringone slightly increased the transient transformation frequency. Use of the appropriate inoculation method, optimal kanamycin concentration and appropriate duration of delayed selection also improved the efficiency of stable genetic transformation of J. curcas. The percentage of b-glucuronidase positive J. curcas shoots reached as high as 56.0 %, and 1.70 transformants per explant were obtained with this protocol. Furthermore, we optimized the root-inducing medium to achieve a rooting rate of 84.9 %. Stable integration of the T-DNA into the genomes of putative transgenic lines was confirmed by PCR and Southern blot analysis. Using this improved protocol, a large number of transgenic J. curcas plantlets can be routinely obtained within approximately 4 months. The detailed information provided here for each step of J. curcas transformation should enable successful implementation of this transgenic technology in other laboratories.

A new method of multi-scale fracture identification in tight gas sandstone reservoir

Tao Wu,Yuezhi Wang,Bin Fu,Peng Wu 한국자원공학회 2019 Geosystem engineering Vol.22 No.2

Identification of fractures is an important guide for the selection of well location as well as improvement of single-well recovery. In this paper, large-scale fractures of Su 48 block (target well) located in Sulige gas field were predicted using the coherence, curvature and anti-tracking analysis while small-fractures prediction were performed using R/S fractal statistical method. The observations revealed that, development of large-scale fractures were not that significant, whilst those of a smaller scale were distributed across the near-wellbore formation constituted of mudstone. Moreover, predicted results using the multi-scale fusion fracture developed model showed good agreement of the existence of fractures during horizontal well drilling in real time. Furthermore, the predicted fractures matched well with those observed in the field. Hence, reflecting the significance of tight gas sandstone reservoir fracture identification method.

Pose Measuring and Aligning of a Micro Glass Tube and a Hole on the Micro Sphere

Fu-Dong Li,De Xu,Zheng-Tao Zhang,Ya-Li Shi,Fei Shen 한국정밀공학회 2014 International Journal of Precision Engineering and Vol. No.

To ensure high uniformity of the inner space of the hollow sphere after assembly, the glass tube must be inserted into the hole on thesphere towards the center of the sphere. This paper deals with the pose measuring of the hole on the sphere and the glass tube andpose aligning of the two objects. The sphere is 500 mm in diameter with a 20 mm hole on it, and the glass tube is 17 mm in diameter. Novel pose measuring method for the hole on the sphere and the glass tube is developed, using two microscopic cameras, each oneacquires a projection vector of the object to be measured. A plane containing the optical axis of the microscopic camera and the posevector of the object is determined, with the microscopic camera calibrated in advance. Pose vector of the object to be measured canbe calculated by the intersection of the two planes acquired by the two microscopic cameras. Error analysis of the pose measuringmethod is conducted and experimental results were consistent with analytical results. Less than 0.7o pose aligning error is achievedusing the proposed pose measuring method and pose aligning method.

Inducible Nitric Oxide Synthase Expression and Luteal Cell DNA Fragmentation of Porcine Cyclic Corpora Lutea

Tao, Yong,Fu, Zhuo,Xia, Guoliang,Lei, Lei,Chen, Xiufen,Yang, Jie Asian Australasian Association of Animal Productio 2005 Animal Bioscience Vol.18 No.5

Nitric oxide (NO) derived from inducible nitric oxide synthase (iNOS) is involved in cell apoptosis, which contributes to luteal regression and luteolysis in some species. In large domestic animals, no direct evidence for the relationship between NO and cell apoptosis in the process of corpus luteum regression is reported. The present study was conducted to investigate the localization of iNOS on porcine corpora lutea (CL) during the oestrus cycle and its relation to cell DNA fragmentation and CL regression. According to morphology, four luteal phases throughout the estrous cycle were defined as CL1, CL2, CL3 and CL4. By isoform-specific antibody against iNOS, the immunochemial staining was determined. Luteal cell DNA fragmentation was determined by flow cytometry. The results showed that no positive staining for iNOS was in CL1 and that iNOS was produced but limited to the periphery of CL2, while in the CL3, the spreading immunochemical staining was found inside the CL. No iNOS positive staining was detected in CL4. Meanwhile, DNA fragmentation increased dramatically when CL developed from CL2 to CL3 (p<0.05). In CL4, higher proportion of luteal cells still had fragmented DNA than that of luteal cells from CL1 or CL2 (p<0.05). These results indicate that iNOS expression is closely related to luteal cell apoptosis and then to luteal regression.