http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
함형철,오세진,김종수 한국마린엔지니어링학회 2003 한국마린엔지니어링학회지 Vol.27 No.7
A new method of direct current motor drive, which requires neither shaft encoder nor speed estimator, is presented. The proposed scheme is based on decreasing current gap between a numerical model and an actual motor. By supplying the identical instantaneous voltage to both model and motor in the direction of reducing the current difference, the rotor approaches to the model speed, that is, reference value. The performance of direct current motor drives without speed sensor is generally poor at very low speed. However, in this system, it is possible to obtain good speed performance in the low speed range.
함형철,김재덕,이윤우,김완주 한국화학공학회 2007 화학공학의이론과응용 Vol.10 No.1
본연구에서는 압력의 변화에 따른 액체 제트(jet)의 안정성을 조사하기 위해서 고압에서의 표면장력을 모세관 오름 방법으로 측정하였고 액체 제트의 breakup 현상을 무차원 수로 correlation하였다. Sprayatomization에서 주된 고려 사항은 정지된 기체상으로 노즐로부터 액체의 분사이기 때문에 액체상쪽의 무차원 변수만을 고려하게 된다. 그러나, 초임계 anti-solvent 공정에서는 기상의 압력이 크고 흐르는 상태이기 때문에 이것을 고려해야 할 필요성이 있다. 이를 위해서 새로운 무차원 변수인 modified Ohnesorge number를 본 연구에서 도입하였다. 초임계 상태에서 액체 제트의 kinetic 에너지가 표면장력 에너지를 극복하여 액체 제트가 노즐 끝에서 파괴되는 것을 시각적인 방법과 무차원 수인 modified Ohnesorge number의 변화로부터 확인 할 수 있었다.
1SN-3 DFT(Density functional theory)를 사용한 수소 저장 매개체로서 암모니아 분해 및 합성 촉매의 최근 연구 동향 이해
함형철,조진원,김승훈,윤창원,윤성필,한종희,남석우 한국공업화학회 2017 한국공업화학회 연구논문 초록집 Vol.2017 No.1
CO<sub>2</sub>에 의한 지구 온난화 문제, 석유에너지 고갈 등이 전 지구적 이슈가 되면서 화석연료를 대체할 수 있는 에너지원 개발이 반드시 필요하다. 수소에너지는 이러한 환경 문제와 에너지 문제를 동시에 해결할 수 있는 미래의 청정 에너지원이다. 이러한 수소 에너지 보급 및 확산을 저해하는 주요한 요인중의 하나는 효율적으로 수소를 저장할 수 있는 매개체 개발이다. 다양한 수소 저장 매개체 중 암모니아는 높은 중량 (17.8wt% H<sub>2</sub>) 및 부피 (121 kg H<sub>2</sub> /㎥ in the liquid form) 수소 밀도를 갖고 있어 최근에 주목을 받아 왔다. 암모니아를 통한 수소 저장 및 생산 공정의 성공적인 개발을 위해서 수소 생산 및 암모니아 합성을 효율적으로 하는 촉매 개발이 필요하다. 본 발표에서는 최신의 First-principles density functional theory(DFT)를 사용하여 암모니아 분해 및 합성용 촉매 개발에 최근 연구 동향 및 산화물 촉매를 사용한 암모니아로부터 수소를 생산하는 촉매 설계에 대한 연구 결과를 제시할 것이다.
용융 탄산염 연료전지용 gamma LiAlO₂ 전해질 지지체의 미세구조 및 기계적 강도 변화에 대한 B₂O₃ 첨가의 영향
함형철(Ham, Hyung-Chul),윤성필(Yoon, Sung-Pil),홍성안(Hong, Seong-Ah) 한국신재생에너지학회 2007 신재생에너지 Vol.3 No.1
A sintering aid, B₂O₃ have been included into a LiAlO₂ electrolyte support by a tape casting method in order to reinforce mechanical strength of the support for molten carbonate fuel cells [MCFCs). Starting idea originates from the low melting point of B₂O₃ (450?C), which can provide the low temperature consolidation of ceramic materials. The mechanical properties and the microstructure changes of the B₂O₃-included electrolyte support were examined by scanning electron microscope, mercury porosimetry, X-ray powder diffraction [XRD], high temperature differential scanning calorimeter and three-point bending strength measurement. The mechanical strength was clearly improved by addition of B₂O₃. The increase of mechanical strength results from the neck growth of a new LiAlO₂ phase between LiAlO₂ particles by the liquid phase sintering. Average pore size and porosity of the electrolyte support reinforced by addition of the sintering aid, B₂O₃, was 0.24{mu}m and 59%, respectively which were suitable microstructure of a matrix for an application of MCFCs.
함형철 ( Hyung Chul Ham ),윤성필 ( Sung Pil Yoon ),홍성안 ( Seong-ah Hong ) 한국신재생에너지학회 2007 신재생에너지 Vol.3 No.1
A sintering aid, B<sub>2</sub>O<sub>3</sub> have been included into a LiAlO<sub>2</sub> electrolyte support by a tape casting method in order to reinforce mechanical strength of the support for molten carbonate fuel cells [MCFCs). Starting idea originates from the low melting point of B<sub>2</sub>O<sub>3</sub> (450℃), which can provide the low temperature consolidation of ceramic materials. The mechanical properties and the microstructure changes of the B<sub>2</sub>O<sub>3</sub>-included electrolyte support were examined by scanning electron microscope, mercury porosimetry, X-ray powder diffraction [XRD], high temperature differential scanning calorimeter and three-point bending strength measurement. The mechanical strength was clearly improved by addition of B<sub>2</sub>O<sub>3</sub>. The increase of mechanical strength results from the neck growth of a new LiAlO<sub>2</sub> phase between LiAlO<sub>2</sub> particles by the liquid phase sintering. Average pore size and porosity of the electrolyte support reinforced by addition of the sintering aid, B<sub>2</sub>O<sub>3</sub>, was 0.24㎛ and 59%, respectively which were suitable microstructure of a matrix for an application of MCFCs.