http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오늘 본 자료
자외선 경화 수지 제조조건에 따른 광경화 필름의 물성과 경화성 연구
최주환,윤영훈,정천희,Choi, Joo Hwan,Yoon, Young Hoon,Jeong, Cheon Hee 한국섬유공학회 2018 한국섬유공학회지 Vol.55 No.4
In this study, we investigated the effects of oligomer, monomer, photoinitiator, and organic pigment content ratios on UV curable resin film. We observed that an O-5 oligomer sample with 50:20 of PUA 584/594 ratios, an M-6 monomer sample with 9:9:9 of HDDA/THFA/EOEOEA ratios, and an I-4 photoinitiator sample with 2:6:2 of Ini 184/754/819 ratios and 1wt% of pigment content, show the best formula conditions. We also observed that the dispersibility of the pigment particles contained in the optimized contents of the ultraviolet curing resin was stable.
ATO 복합사를 이용한 열차단 직물의 태양방사투과율 변화 연구
최주환,김대근,김선남,최동혁,이승걸,Choi, Joo Hwan,Kim, Dae Geun,Kim, Sun Nam,Choi, Dong Hyuk,Lee, Seung Geol 한국섬유공학회 2016 한국섬유공학회지 Vol.53 No.6
In this study, we manufactured ATO (antimony tin oxide) combined fibers to improve solar energy transmittance of sunscreen fabrics. The results indicate that the solar energy transmittance is improved with increasing sheath ratios and ATO content. We observed that the MS2-7W sample with 50:50 sheath/core ratio and 3 wt% of ATO content show the best performance. We also manufactured the sunscreen fabrics using the developed ATO combined fibers to check the performance of the thermal barrier. The results of the solar energy transmittance analysis show that an approximate 58% improvement was achieved for the thermal barrier over the commercial sunscreen fabric without any ATO content.
터빈 간접가열식 상압형 MCFC/가스터빈 복합시스템의 성능예측과 경제성 평가
최주환(Joo Hwan Choi),김동섭(Tong Seop Kim),곽부호(Bu Ho Kwak) 대한기계학회 2014 大韓機械學會論文集B Vol.38 No.1
연료전지와 가스터빈의 하이브리드 시스템의 성능은 시스템 구성방법에 따라 영향을 많이 받는다. 본 연구에서는 용융탄산염연료전지(MCFC)와 가스터빈을 터빈간접가열방식으로 모사하여 성능을 예측하였다. 하이브리드 시스템의 설계파라미터의 변화에 따른 성능의 경향을 나타내었다. 그리고 MCFC 단독 운전시의 설계조건에 미치는 영향을 최소화하는 가장 합리적이고 실현가능한 하이브리드 시스템의 설계 조건을 구현하였다. 경제성 평가를 통해 MCFC단독 시스템 대비 하이브리드 시스템의 경제적 이점을 평가하였다. The performance of fuel cell/gas turbine hybrid systems is highly affected by system configuration. In this study, the performance of a hybrid system combining a molten carbonate fuel cell (MCFC) and an indirectly fired gas turbine was predicted. Firstly, general performance trends of the hybrid system depending on major design parameters were examined. Then, the most feasible design options with the least impact on the MCFC stack design conditions were drawn. The economic advantage of the hybrid system over the basic MCFC only system was evaluated.
스포츠?레저 산업용 소재 Sailing cloth, 낙하산 및 패러글라이더용 섬유소재 개발동향
최주환 ( Joo Hwan Choi ),임재호 ( Jae Ho Lim ) 한국공업화학회 2014 공업화학전망 Vol.17 No.6
Sailing cloth용 섬유소재를 개발하는 기술 중 슈퍼섬유를 활용하여 제품화하는 기술은 가장 최신의 기술이면서, 산업계에서도 수요가 큰 연구개발분야 일 것이다. Sailing cloth 섬유소재는 주로 초고분자량 폴리에틴렌, 아라미드계 소재가 많이 사용되고 있으며, 가공분야는 라미네이팅과 코팅법에 의하여 용도적합성에 따라 개발되고 있음을 확인하였다. 최근에 개발 중인 Sailing cloth용 제품에 대한 기술동향과 시장동향에 대한 현황을 살펴보았다. 고성능섬유를 활용한 소재개발 종류 및 가공기술에 이르기까지 최신 연구동향을 중심으로 기술하였다.
국내 사례분석을 통한 하천오염도와 지반오염원의 상관관계에 관한 연구
최주환(Joo hwan Choi),송원준(Won jun Song),이준환(Jun hwan Lee) 한국방재안전학회 2010 한국방재안전학회 논문집 Vol.3 No.1
본 연구는 선행연구들의 하천 유역 오염물질 및 오염도 분석결과를 바탕으로 하천 오염도와 지반 오염물질 간의 상호관계에 대해 분석하였다. 크게 도시 및 산업지구 인접 하천인 낙동강, 태화강, 안양천과 농·축산지 인접 하천인 영산강, 미호천으로 구분해 연구하였으며, 대상 오염원은 중금속 오염물질로 한정하였다. 도시 및 산업지구 인접 하천의 경우 중금속 오염물질 함유량이 일치하여 상관성을 보였으나 농·축산지 인접 하천의 경우 불일치하여 상관성을 밝히기 어려웠다. 도시 및 산업지구 인접 하천의 경우 점오염원의 영향을 많이 받기 때문에 지반오염에도 직접적인 영향을 미친 것을 알 수 있었고 농·축산지 인접 하천의 경우 점오염원보다 비점오염원의 영향을 많아 하천오염도와 지반오염의 상관성이 적은 것으로 나타났다. This study measured for comparison and analysis the correlation of River pollution and Soil contamination, based on the results of previous research, and then in order to increase the efficiency of study, heavy metals which cause serious side effects was limited to the case among pollutants. This study focused on the rivers that near the Urban and industrial districts, for example, Nak-Dong river, An-Yang river, Tae-Hwa river and the rivers that near the farmland or pasture, for example, Yeong-San river, Mi-Ho river, then compare and analyze the degree of actual pollution as gathered the results of Previous research. Correlationship about pollutants of river near the Urban, industrial area and drainage basin its river has been proven, and this expected because of the strong influence by point pollution source. On the other hand, I can found the opposite relationship where the river near the farmland or pasture, and this probably because of the influence by nonpoint pollution source.
Flow-3D 모형을 이용한 순환수취수펌프장 내 흐름현상 연구
하성원(Sung-Won Ha),김태원(Tae-Won Kim),최주환(Joo-Hwan Choi),박영진(Young-Jin Park) 한국산학기술학회 2019 한국산학기술학회논문지 Vol.20 No.4
인도네시아는 전력 공급이 매우 부족한 현실에 처해 있으며, 이에 대한 해결책으로 화력발전소 건설 계획이 증가하고 있다. 화력발전소는 발전에 수반되는 엔진과 장비의 과열을 식히기 위해 냉각수 계통을 필요로 하며, 냉각수 계통 중 순환수취수펌프장(circulating water pump chamber)은 일반적으로 ANSI (1998) 기준에 따라 설계된다. 본 연구에서는 인도네시아 K-석탄화력발전소의 순환수취수펌프장이 현장 여건상 ANSI (1998)의 확산각 설계기준 20°를 만족시킬 수 없어, 수리적으로 안정된 흐름 및 구조물이 되도록 3차원 수치모형실험을 수행하였다. 수치모형으로 Flow-3D 모형을 이용하였다. Flow-3D 모형의 적용성을 검토하기 위해 Rodi (1997)의 사각형 구조물 주변에 형성되는 흐름 연구 결과와 금회 수치해석 결과를 비교하였다. 수치해석에서 도출된 종방향 유속 분포는 잘 일치함을 보여주고 있다. 순환수취수펌프장 내 설계유속을 만족시키기 위해 유속 저감에 유리한 사각형 형태의 배플을 적용하였다. 순환수취수펌프장으로 유입되는 유속이 1.5 m/s ~ 2.5 m/s로 분포되는 경우, 배플에서 분리흐름의 각도는 약 15° ~ 20°로 발생하였다. 이를 고려하여 분리흐름 각도 이하로 하류에 배플을 배치함으로 Inlet bay 설계유속 0.5 m/s 이하를 만족시켰다. Indonesia has a very short supply of electricity. As a solution to this problem, plans for construction of thermal power plants are increasing. Thermal power plant require the cooling water system to cool the overheated engine and equipment that accompany power generation, and the circulation water pump chamber among the cooling water system are generally designed according to the ANSI (1998) standard. In this study, the design criterion 20° for the spreading angle of the ANSI (1998) of the layout of the circulating water pump chamber can not be satisfied on the K-coal thermal power plant site condition in Indonesia. Therefore, 3-D numerical model experiment was carried out to obtain a hydraulically stable flow and stable structure. The Flow-3D model was used as numerical model. In order to examine the applicability of the Flow-3D model, the flow study results around the rectangular structure of Rodi (1997) and the numerical analysis results were compared around the rectangular structures. The longitudinal velocity distribution derived from numerical analysis show good agreement. In order to satisfy the design velocity in the circulating water pump chamber, a rectangular baffle favoring velocity reduction was applied. When the approach velocity into the circulating water pump chamber was occurred 1.5 m/s ~ 2.5 m/s, the angle of the separation flow on the baffle was occurred about 15° ∼ 20°. By placing the baffle below the separation flow angle downstream, the design velocity of less than 0.5 m/s was satisfied at inlet bay.