http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조일국,안철민,이은경 한국마린엔지니어링학회 2019 한국마린엔지니어링학회지 Vol.43 No.10
To investigate the high-temperature thermomechanical properties of the aluminum alloy AlSi10MnMg (AA365), a high-temperature tensile test was conducted over a wide range of temperatures (273 K to 773 K). The tensile strength of the AA365 alloy decreased from 299 MPa to 10 MPa as the temperature increased. The tensile strain increased from 12.4 % at 273 K to 44.6 % at 673 K. The microstructural observation showed that the effect of intermetallic compounds increased rapidly with the increase in temperature. This effect led to the strengthening effect caused by disturbing the dislocation movement and was considered as the reason for the increase in yield strength. A sudden decrease in tensile strength was caused by re-dissolution of secondary phases owing to the increase in temperature near the melting point. Through the fractography analysis, it was revealed the mechanism of rapid fracture occurred by the micro-cavities induced ductility failure.
비수용액 전해질에서 전기도금한 니켈-TiO₂ 복합 도금층의 표면 및 광분해 특성 연구
조일국(Il guk Jo),지창욱(Chang wook Ji),최철영(Chul young Choi),김영석(Young seok Kim),김양도(Yang do Kim) 한국표면공학회 2008 한국표면공학회지 Vol.41 No.5
Composite plating is a method of co-deposition of plating layer with metallic and/or non-metallic particles to improve the plating layer properties such as high corrosion resistance and photolysis of organic compounds. The properties of nickel-ceramic composite plating are significantly depend on the surface characteristics of co-deposited particles as well as the quantity in electrolyte. In this study, Ni-TiO₂ composite coating layer was produced by electrodeposition technique from non-aqueous electrolyte and its surface characteristics as well as photolytic properties were investigated. The amounts of immobilized TiO2 particles increased with increasing the initial TiO₂ particles contents in the bath. Samples electroplated with the current density of 0.5 A/d㎡ showed the significantly improved homogeneous TiO₂ particles distribution. The corrosion resistance of Ni-TiO₂ composite coating layer also improved with increasing the amounts of TiO₂ particles. Etched sample showed about 10% increased photolytic rate of organic matter compare to that of the non-etched.
조일국(Il Gook Cho),김호준(Ho Joon Kim) 한국정보과학회 2006 한국정보과학회 학술발표논문집 Vol.33 No.1
본 연구에서는 실내에서 입력 받은 영상의 조명과 크기 변화 등에 강인한 얼굴 검출 기법을 소개한다. 제안된 얼굴 검출 기법은 후보 영역 선정 과정과 얼굴패턴 검출 과정, 얼굴 영역 보정 과정으로 이루어진다. 후보 영역 선정 과정에서는 조명보정과 색상 필터, 움직임 필터를 이용하여 얼굴패턴의 후보 영역을 선정한다. 얼굴패턴 검출 과정에서는 CNN을 이용하여 특징을 추출하고, WFMM신경망을 이용하여 얼굴 패턴을 검증한다. 얼굴 영역 보정 과정은 형태학적 연산 등의 영상 처리를 이용하여 눈 영역과 입술 영역의 위치를 판별한 후 최종적인 얼굴 영역을 결정한다.
레이저 침탄된 TiZrN 코팅에서 탄소확산거동과 기계적 특성
유현조,김태우,김성훈,조일국,이희수,Yoo, Hyunjo,Kim, Taewoo,Kim, Seonghoon,Jo, Ilguk,Lee, Heesoo 한국결정성장학회 2021 韓國結晶成長學會誌 Vol.31 No.1
본 연구는 레이저 침탄된 TiZrN 코팅층의 탄소확산거동 측면과 이에 따른 기계적 특성 변화를 연구·고찰하였다. TiZrN 코팅에 탄소페이스트를 도포한 후, 레이저를 조사하여 침탄시켰다. 침탄 이후에 (111)상에 해당하는 XRD 피크가 저각으로 이동하여, 도핑된 탄소에 의한 격자팽창을 보여주었다. 아울러, 투입된 탄소의 입계 확산에 의한 결정립의 크기가 감소하였다. 침입된 탄소의 결합상태를 확인하기 위한 XPS 분석결과, 레이저의 열에너지를 통해 탄소가 TiZrN내 질소 원자와 치환되어 탄화물(TiC 또는 ZrC)을 보였다. 아울러, sp2와 sp3 혼성화 결합이 혼재하는 상태를 보여 비정질 탄소가 형성된 것을 확인할 수 있었다. 침탄 전후 TiZrN 코팅층의 단면 TEM 이미지와 inverse FFT 분석결과, 격자 중간에 물결형상이 관찰되어 결정립계 내 비정질 상의 형성을 보여주었다. 침탄 후 경도는 34.57 G Pa에서 38.24 G Pa로 증가하였으며, 마찰계수는 83 % 감소하였다. 특히, 외부 하중에 저항하는 지표로 활용되는 H/E는 0.11에서 0.15으로 증가하였고 wear rate는 65 % 개선되는 것을 확인할 수 있었다. This study was investigated in carbon diffusion behavior of laser-carburized TiZrN coating layer and the changes of mechanical properties. The carbon paste was deposited on TiZrN coatings, and the laser was irradiated to carburize into the coatings. The XRD peak corresponding to the (111) plane shifted to a lower angle after the carburization, showing the lattice expansion by doped carbon. The decreased grain size implied the compression by the grain boundary diffusion of carbon. The XPS spectra for the bonding states of carbon was analyzed that carbon was substitute to nitrogen atoms in TiZrN, as carbide, through the thermal energy of laser. In addition, the combination of sp2 and sp3 hybridized bonds represented the formation of an amorphous carbon. The cross-sectional TEM image and the inverse FFT of the TiZrN coating after carburizing were observed as the wavy shape, confirming the amorphous phase located in grain boundaries. After the carburization, the hardness increased from 34.57 GPa to 38.24 GPa, and the friction coefficient decreased by 83 %. In particular, the ratio of hardness and elastic modulus (H/E) which is used as an index of the elastic recovery, increased from 0.11 to 0.15 and the wear rate improved by 65 %.
조일국(Cho Il-Gook),박현정(Park Hyun-Jung),김호준(Kim Ho-Joon) 한국방송·미디어공학회 2005 한국방송공학회 학술발표대회 논문집 Vol.2005 No.-
본 논문에서는 방송 영상에서 조명효과와 크기변화 등에 강인한 얼굴패턴 검출기법을 제시한다. 제안된 얼굴검출 모델은 영상 전처리 과정과 얼굴패턴 검출 과정으로 이루어진다. 전처리 과정은 조명변화에 대한 보정기능과 다중필터에 의한 후보영역 선별기능으로 구분된다. 얼굴패턴 검출과정은 다단계의 특징지도 생성과정과 패턴분류 과정으로 이루어진다. 특징지도를 생성하기 위하여 가보(Gabor) 필터계층을 포함하는 CNN(Convolutional Neural Networks)모델을 도입하였다. 다양한 배경을 고려한 효과적인 학습을 위하여 본 논문에서는 억제성의 뉴런(Inhibitory neuron)을 포함하는 구조의 CNN모델을 적용한다. CNN으로부터 추출되는 특징집합은 최종 단계에서 WFMM(Weighted Fuzzy Min Max) 모델을 사용하여 분류된다. 이때 사용되는 특징집합의 크기는 분류기의 규모 및 계산량의 결정적인 역할을 준다. 이에 본 연구에서는 최종 분류 과정에 사용되는 특징의 수를 효과적으로 줄이기 위해 FMM모델을 사용하는 적응적인 특징 선별 기법을 제안한다. 또한 실제 영상을 동한 실험결과로부터 제안된 이론의 타당성을 고찰한다.
복합형 필터와 CNN 모델을 이용한 효과적인 얼굴 검출 기법
조일국 ( Il Gook Cho ),박현정 ( Hyun Jung Park ),김호준 ( Ho Joon Kim ) 한국정보처리학회 2005 한국정보처리학회 학술대회논문집 Vol.12 No.1
본 논문에서는 수정된 CNN(Convolutional Neural Network) 모델과 다중 필터가 상호 결합된 형태의 얼굴 패턴 검출 기법을 소개 한다. 이는 로봇 시각의 응용문제에서 실내영상의 실시간 인식문제를 대상으로 한다. 검출 과정의 효율성 향상을 위하여 도입된 다중 필터는 후보 영역의 개수와 범위를 줄일 수 있게 한다. 제안된 모델에서 CNN 신경망은 가보변환(Gabor Transform)계층을 두어 검출 과정의 첫 단계에서 영상 내의 기본 특징 지도를 생성 하도록 하였다. 보다 강인한 검출기능을 위하여 조명보정 기법이 시스템의 전처리 단계로 구현 된다. 실제 영상을 통한 실험 결과로부터 제안된 이론의 타당성을 고찰 한다.