http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전주일(全州一) 금속광산(金屬鑛山) 폐광미(廢鑛尾)의 활용(活用) 방안(方案) 연구(硏究)
정수복,채영배,현종영,김형석,윤성문,Jeong, Soo-Bok,Chae, Yeung-Bae,Hyun, Jong-Yeong,Kim, Hyung-Seok,Yoon, Sung-Moon 한국자원리싸이클링학회 2007 資源 리싸이클링 Vol.16 No.1
전주일 광산 광미는 $SiO_2$의 함유량이 높고, 유해 중금속 성분의 함유량이 적은 특성을 갖고 있다. 본 연구에서는 이러한 광미를 각종 산업원료로 재활용할 수 있는 가능성을 알아보았다. 광미는 세라믹스 소결체의 원료로 사용한 결과, 색도 및 색상, 소성수축률, 흡수율 등에서 우수한 물성을 보였다. 보통포틀랜드시멘트 원료 중 실리카 성분으로 조합 원료의 2.59%까지 사용이 가능하였다. 광미를 조립물과 미립물로 분리하여 조립산물은 건조 시멘트 모르타르 원료로, 미립산물은 역청 포장용 채움재로 사용한 결과, 두 시료 모두 환경 위해성이 없고 KS 규격에 적합한 물성을 나타내었다. The Jeonju-Il mine tailings contain large quantities of $SiO_2\;and\;Al_2O_3$ and lesser quantities of metallic components. In this study, we studied about the possibility of using mine tailings as a raw material in various industries. it was found that the sintered mine tailings had a good quality in every respect such as chromaticity, firing shrinkage and water absorption etc. Therefore if can substitute clay mineral in the ceramic industry. Also it can substitute about 2.94% of the raw materials of ordinary portland cement. We can use the coarse tailing as the fine aggregate for the ready-mixed mortar; and the fine tailing, as the filler for the bituminous paving mixture; because both products were not only suitable for Korea industrial standard in quality, but also environmentally harmless.
정수복 ( Soo Bok Jeong ),김완태 ( Wan Tae Kim ),채영배 ( Young Bae Chae ),임정한 ( Jung Han Rim ) 한국광물학회 2002 광물과 암석 (J.Miner.Soc.Korea) Vol.15 No.4
Dry-based processes such as crushing, milling, sieving, magnetic and gravity separation were employed in order to investigate the purification characteristics of bentonite. The CECs of Gampo 13 and 35 bentonites were estimated at 88.3 and 93.9 meq/100 g and the samples contained quartz and feldspar as impurity minerals. According to the physical properties of constituent minerals of bentonite, the purification techniques were adopted to enhance the grade of montmorillonite. High grade of montmorillonite could be obtained by the combination of each process. Consequently, the recovery of final products of Gampo 13 and 35 bentonite were 68.6 and 49.5%, and the CECs of them were 96.9 and 109.6 meq/100 g, respectively.
현종영,정수복,채영배,Hyun Jong-Yeong,Jeong Soo-Bok,Chae Young-Bae 한국자원리싸이클링학회 2005 資源 리싸이클링 Vol.14 No.4
석란광산에서 발생되는 선탄폐석을 효율적으로 이용하기 위하여 세라믹스 원료 소재로의 활용 가능성을 고찰하였다. 석탄폐석의 첨가량이 증가함에 따라 소성 시험편의 소성수축률이 저하되고, 압축강도는 약간 감소하는 등의 효과와 선탄페석에 함유되어 없는 탄소분의 연소에 의한 기공의 증가로 제품의 경량화도 가능한 것으로 판단되었다. 선탄폐석의 첨가량을 변화시켜 $1,150^{\circ}C$ 이상에서 소성한 경우 흡수율은 $10\;wt\%$ 이하를 나타내었고, 압축강도는 모두 21MPa이상으로 KS L 4201에서 규정한 1종 점토벽돌의 기준에 모두 적합함을 확인할 수 있었다. In this study, the utilization possibility of coal-preparation refuse emitted from Hwasun coal mine in Korea as a raw material for ceramic body was investigated. The firing shrinkage ratio of ceramic specimen made from the coal-preparation refuse was reduced with increasing the addition amounts of that, while the compressive strength was slightly decreased. The weight of ceramic body was also reduced because carbon contained in the coal-preparation refuse was burn by fring. The water adsorption ratio of the ceramic specimen was under 10 wt%, and the compressive strength of that was over 21 MPa at over $1,150^{\circ}C$ for 2 hr. Therefore, it was possible to make the 1st garde clay brick of KS L 4201 from the coal-preparation refuse.
현종영,정수복,채영배,김병수,Hyun, Jong-Yeong,Jeong, Soo-Bok,Chae, Young-Bae,Kim, Byung-Su 한국자원리싸이클링학회 2005 資源 리싸이클링 Vol.14 No.2
화력발전소의 배연탈황공정에서 발생된 탈황석고의 용도확대 및 천연 무수석고의 대체 가능성을 조사하기 위하여 탈황석고로부터 건식 열처리법에 의한 무수석고의 제조특성 및 탈황 무수석고에 대하여 시멘트 및 콘크리트 2차 제품으로의 적용 특성을 조사하였다. 탈황석고로부터 Ⅱ형 무수석고의 상전이는 700$^{\circ}C$ 부근에서 완전히 종료되었고, 이러한 Ⅱ형 무수석고의 상전이 과정에서 입자크기의 변화 등을 확인할 수 있었다. 천연 무수석고와 탈황 이수석고로부터 제조된 무수석고는 화학성분 조성, 입자크기, 열적특성 등의 물성이 유사하였다. 무수석고를 시멘트나 콘크리트 2차 제품에 적용시킬 때 부식문제를 발생시킬 수 있는 황산기(SO$_4^{2-}$)의 용출실험 결과, 700$^{\circ}C$에서 1시간 열처리로 제조된 탈황 무수석고는 천연 무수석고에 비하여 황산기의 용출량이 약 50 wt.% 감소됨을 확인할 수 있었고, 소석회(Ca(OH)$_2$) 3 wt.%의 첨가에 의해 황산기의 용출량이 천연 무수석고에 비하여 약 70 wt.% 감소시킬 수 있었다. 탈황 무수석고를 시멘트 및 콘크리트 2차 제품에 적용시킨 결과, 압축강도 등의 물성이 천연무수석고에 비하여 동등 또는 우수함을 확인할 수 있었다. The manufacture property of anhydrous calcium sulfate (anhydrite Ⅱ) from flue gas desulfurization (FGD) gypsum discharged from domestic thermoelectric power plants to apply as an auxiliary material of cement and concrete by high temperature treatment were investigated. The FGD gypsum was completely converted to anhydrite Ⅱ at the temperature of 700$^{\circ}C$ and the retention time of 1 hr. In the phase transformation process, particle size was also changed. The chemical composition, particle size and heat property of anhydrite Ⅱ made from the FGD gypsum were similar to them of natural gypsum. In the leaching test of sulfate ion (SO$_4^{2-}$) at the temperature of 90$^{\circ}C$ and the retention time of 1 hr, the amount of leached SO$_4^{2-}$ for the anhydrite Ⅱ that was sintered at 700$^{\circ}C$ for 1 hr was about 50 wt.% based on that of natural gypsum. In addition, the amount of leached SO$_4^{2-}$ for the anhydrite Ⅱ by adding the slaked lime of 3 wt.% decreased about 70 wt.% comparing with that of natural gypsum. In the application test, the compressive strength of cement and concrete manufactured by using the anhydrite Ⅱ as an auxiliary material were similar or superior compared with them of cement and concrete done by natural gypsum as an auxiliary material.
3차원 X-ray 단층 화상을 이용한 스카른 광석의 정량분석 연구
정미희 ( Mi Hee Jeong ),조상호 ( Sang Ho Cho ),정수복 ( Soo Bok Jeong ),김영훈 ( Young Hun Kim ),박재구 ( Jai Koo Park ),금자승비고 ( Katsuhiko Kaneko ) 한국광물학회 2010 광물과 암석 (J.Miner.Soc.Korea) Vol.23 No.3
스카른 Zn-Pb-Cu 복합광석을 구성하는 주요 구성 광물의 정량분석을 목적으로, 마이크로 포커스 X-ray 단층촬영 장비를 이용한 스카른 복합광석의 3차원 비파괴검사를 수행하였다. X-ray 단층화상의 화상결함을 감소시키고자 제안된 화상보정법을 이용하여 화상들을 보정한 후에 3차원으로 재구성하였다. 주사전자현미경(SEM)에 의한 표면분석과 보정된 X-ray 단층화상을 비교하여 주요광물에 대한 CT 값의 범위를 결정하였다. 재구성화상 내 전체 광물의 체적비율을 분석한 결과, 황화광물 20.5%, 맥석광물 79.5%로 평가되었다. X-ray 3차원 단층화상 정량분석법은 광석 내 유용광물의 부존 형상과 회수율 분석에 유용하게 적용될 것으로 기대된다. A micro-focus X-ray computed tomography (CT) was employed to determine quantitative phase analysis of skarn Zn-Pb-Cu ore by nondestructive visualization of the internal mineral distribution of a skarn ore. The micro CT images of the ore were calibrated to remove beam hardening artifacts, and compared with its scanning electron microscope (SEM) images to set the threshold of CT number range covering sulfide ore minerals. The volume ratio of sulfide and gangue minerals was calculated 20.5% and 79.5%, respectively. The quantitative 3D X-ray CT could be applied to analyse the distribution of economic minerals and their recovery.
50kW급 계통연계형 태양광발전시스템의 시뮬레이터 구현
정병호,박정민,조금배,백형래,정수복,Jeong, Byeong-Ho,Park, Jeong-Min,Cho, Geum-Bae,Baek, Hyung-Lae,Chung, Soo-Bok 한국태양에너지학회 2005 한국태양에너지학회 논문집 Vol.25 No.4
This paper summarizes the results of these efforts by offering a photovoltaic system structure in 50kW middle scale applications installed in Cho-sun University dormitory roof. The combination of photovoltaic system components are interconnected and system monitoring system will be summarized for the purpose of the increasing safety in this article. This paper describes configuration of utility interactive photovoltaic system which generated electric power supplies to dormitory. In order to installing the middle or large scale photovoltaic system, It must investigated the optimal design of system, compute quantity of power generation, economic rate of return and so on. In this paper represent 50kW utility photovoltaic system examination and developed simulation results. The performance of photovoltaic system has been evaluated and analyzed with simulation. The results obtained in this research will be much useful to prior investigation for installing utility interactive photovoltaic system.