http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
산업부산물의 Ca 성분 용출 특성 및 액상탄산화 반응을 이용한 침강성 탄산칼슘 제조에 관한 실험적 연구
임윤희,이주열,신재란,최창식,홍범의,강호종,박병현,Lim, Yun-Hui,Lee, Ju-Yeol,Shin, Jae-Ran,Choi, Chang-Sik,Hong, Bum-Ui,Kang, Ho Jong,Park, Byung Hyun 한국응용과학기술학회 2015 한국응용과학기술학회지 Vol.32 No.1
본 연구에서는 이산화탄소 고정화에 있어 이산화탄소 전환을 위해 MEA를 이용한 습식화학흡수법의 셔틀메카니즘을 도입하였다. 또한 알칼리 무기물질을 다량 함유한 산업부산물을 습식탄산화법을 이용해 처리하고자 하였다. 즉, 산업부산물의 화학적 처리를 통해 칼슘이온을 용출하였다. 산성물질을 이용한 용출상징수를 ICP로 분석한 결과, 칼슘이온이 최대 17,900 ppm(1.79%)을 확보하였다. 또한 MEA를 이용한 습식 흡수공정을 통해 상온, 상압조건의 이산화탄소 분위기에서 94%의 전환률을 얻었다. 슬러지의 액상탄산화를 통해 슬러지 mg 당 0.175 mg의 이산화탄소를 고정하였으며, 최종생성물의 XRD 분석결과 일반적인 탄산칼슘의 결정구조인 calcite 형상을 확인하였다. The present study utilized a shuttle mechanism of wet chemical absorption using MEA. In addition, industrial by-products containing a large amount of inorganic alkali substances were utilized for wet carbonization process. Chemical pretreatment of industrial by-products extracted calcium ions. ICP result of calcium ion was obtained up to 17,900 ppm(17.9%) by acidic substance. And also, In this work, 94% of recovery rate was obtained using wet MEA absorption process from $CO_2$ flow at the ambient condition. Through the liquid carbonation process, a sludge was fixed with rate of 0.175 mg of $CO_2$ per mg of sludge. It was found from XRD results that the structure of final product was composed of a calcite structure which is general structure of $CaCO_3$.
임윤희,강성덕,오명호,김명한,김상대,Lim, Yoon Hee,Kang, Seong Deok,Oh, Myoung Ho,Kim, Myeong Han,Kim, Sang Dae 한국강구조학회 2007 韓國鋼構造學會 論文集 Vol.19 No.3
The steel-concrete composite column (i.e., the SC composite column) supports large-gravity loads and simplifies the installation and removal of the work in pouring the concrete. The column takes advantage of the in-plant prefabrication of steel, the speed of erection of a steel structure, and the fire resistance of steel. This paper presents the results of a parametric study using heat transfer analysis and a P-M interaction curve, and compares these results with the experimental results to check the accuracy of the proposed parametric studies. The parametric studies, such as the study of the concrete ratio of an area and the fire protection thickness, provide information on the fire resistance of SC composite columns. 기존 합성기둥의 장점을 유지하면서 콘크리트 충전 시 거푸집 공사의 절감과 충전상태의 육안 확인이 가능한 철골 콘크리트 합성기둥(이하 SC 합성기둥)에 대한 연구가 활발히 진행되고 있다. SC 합성기둥은 콘크리트가 철골의 웨브를 둘러싸고 있어 화재 발생시 높은 열이 웨브까지 전달되는 시간을 지연시켜 뛰어난 내화성능을 가질 것으로 예상할 수 있다. 본 연구에서는 SC 합성기둥에 대해 열전달 해석을 수행하였고, 이를 바탕으로 P-M 상관 곡선을 이용하여 내화성능을 평가를 하였고, 이때의 해석변수는 콘크리트 면적비와 내화피복두께로 하였다. 또한 열전달 해석 방법을 검증하기 위해서 실제 수행된 실험 결과와 비교하여 이의 적절성을 검증하였다.
임윤희,강성덕,오명호,김명한,김상대,Lim, Yoon Hee,Kang, Seong Deok,Oh, Myoung Ho,Kim, Myeong Han,Kim, Sang Dae 한국강구조학회 2006 韓國鋼構造學會 論文集 Vol.18 No.5
The purpose of thisanalytical study of an iTECH composite beam subjected to fire conditions is to determine the beam's fire resistance performance using its load ratio and fire protection as parameters. A composite structural system is expected to have a safer and more economical fire safety design than a mere collection of isolated members.heat transfer analysis was performed on the basis of the finite element program ANSYS 10.0 using an ISO834 standard fire, following the main guidelines proposed by EC1 Part 2.2 and EC4 Part 1.2. To validate the analytical simulation of the iTECH composite beam, comparison of the experimental tests was proposed. 본 연구는 하중비, 피복유무의 주요변수를 고려한 iTECH 합성보의 내화성능을 해석적 연구를 통해서 규명한 것이다. 합성보 구조는 개별적인 구조부재보다 내화성능이 우수할 것으로 기대되므로 해석적 연구에 의해서 안전하고 경제적인 내화설계를 제시할 수 있다. 열전달 해석은 범용 유한요소 프로그램인 ANSYS 10.0을 이용하여 ISO표준화재에 대해서 수행하였으며, EC1 Part 2.2와 EC4 Part1.2에서 제시된 모멘트 능력식과 강재와 콘크리트의 열적특성에 근거하여 내력해석을 수행하였다. 해석의 적절성을 검증하기 위해 실제적으로 수행된 실험결과와 비교를 통해서 그 적절성을 검증하였다.
임윤희(Yun Hui Lim),이주열(Ju Yeol Lee),박병현(Byung Hyun Park),홍승혁(Seung-Hyouk Hong),임동호(Dong-Ho Im),김요섭(Yo Seop Kim),김병순(Byung-Soon Kim) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 연구는 건물의 에너지 효율 향상을 위한 다중이용시설 및 공동주택의 환기시스템 개선의 요소기 술 중 하나인 이산화탄소 제거용 흡착제 및 흡착모듈에 관한 것이다. 제올라이트를 기반으로 제조한 이산화탄소 흡착제의 기본 물성 평가 및 저농도 이산화탄소에 대한 선택도를 통해 최적의 흡착제를 개발하였으며, 이를 환기시스템에 적용하기 위하여 흡착필터를 장착할 수 있는 흡착모듈을 형상별로 설계, 제작하여 평가하였다. 최적화된 흡착제가 충진된 흡착필터는 덕트 내 유속을 고려한 유속별, 흡 착층 높이에 따른 차압을 측정하여 2 m/s에서 20 mmAq 이하의 압력손실을 유지하였으며, 챔버시험 결과 80 % 이상의 CO₂ 제거효율을 확인할 수 있었다.
알칼리금속을 함침시킨 아미노산 염 수용액의 이산화탄소 흡수특성 연구
임윤희 ( Yun Hui Lim ),조영민 ( Young Min Jo ),박준석 ( Joon Seok Park ) 한국공업화학회 2011 공업화학 Vol.22 No.5
본 연구는 이산화탄소 흡수성능을 향상시키기 위하여 아미노산에 알칼리금속을 함침시키는 것이다. 사용된 아미노산은 글리신이었으며, 알칼리성분 추가에 따라 pH가 11까지 증가하였다. 시험제조한 아미노산 염은 회분식과 연속식 흡수공정에서 이산화탄소의 포집능을 평가하였다. 치환된 금속종류에 따른 이산화탄소 흡수량은 Sodium Glycinate (Na-Gly) ≥ Lithium Glycinate (Li-Gly) > Potassium Glycinate (K-Gly) 순으로 나타났다. 흡수반응온도에 따른 CO2 흡수량 시험결과, 20 ℃에서는 알칼리금속을 함침시킨 아미노산 염이 1차 아민보다 약간 낮은 흡수능을 보였으나, 연속식 흡수반응기에서는 10% CO2 흐름에 대하여 반응기 내부온도가 상승하면서(40 ℃, 60 ℃) 아미노산 염의 흡수량 증가폭이 아민에 비하여 상대적으로 크게 나타났다. The present study attempted to impregnate alkali metals to amino acid in order to improve CO2 absorption capacity. A used amino acid was glycine, of which pH increased up to about 11 with the addition of alkalies. CO2 absorption capacity of amino acid salts was evaluated in a batch and a continuous process. The absorption capacity appeared in turns as; Sodium Glycinate ≥ Lithium Glycinate > Potassium Glycinate. Amino acid salts showed lower absolute capacity of CO2 absorption than primary amine (Monoethanolamine) at 20 ℃. In a continuous absorption with 10% CO2 flow, the increasing the reaction temperature, the increasing rate of absorption for amino and was higher that of than amino absorbent.
임윤희 ( Yun Hui Lim ),박영구 ( Young Koo Park ),조영민 ( Young Min Jo ) 한국공업화학회 2012 공업화학 Vol.23 No.3
본 연구는 이산화탄소에 대한 화학적 흡수공정의 새로운 흡수제로서 글리신 수용액의 화학적 특성과 흡수성능을 고 찰하였다. 이산화탄소 흡수에 관여하는 작용기인 아미노기를 활성화시키기 위해 세 종류의 알칼리원소(Na, Li, K)를 선택하여 글리신에 함침시켰다. 제조한 흡수제에 대한 IR 분석결과, 글리신 수용액의 암모늄이온(-NH3 + , 1600 cm -1 , single)형태로 존재하던 작용기가 아미노기(-NH2, 1550∼1650 cm -1 , scissoring)형태로 전환된 것을 확인할 수 있었다. 또한, 1 H-NMR과 13 C-NMR 분석결과, 금속 양이온의 치환에 의한 염화현상(salting)으로 기존 글리신에서의 수소와 탄 소원자의 화학적 이동의 차이를 확인할 수 있었다. 즉, 치환된 금속의 전기 음성도에 따라 리튬염, 나트륨염 그리고 칼륨염 순으로 화학적 이동이 나타났다. 한편 상온에서의 이산화탄소 흡수량은 비교대상인 1차 아민이 가장 높았으며, 나트륨 글리신염, 리튬 글리신염, 칼륨 글리신염 순으로 나타났다. 그러나 연소공정 배출가스 내 이산화탄소 포집을 가정하여 온도상승(40, 60, 80 ℃)에 따른 실험결과, 나트륨 글리신염이 MEA보다 높은 흡수량을 보였다. This work deals with the chemical characterization of glycine aqueous solution in CO2 absorption. Three alkali elements were impregnated into the glycine in order to facilitate the formation of amino functionalities. The analysis by IR revealed the transformation of ammonium ions to the amino group. In addition, the NMR analysis showed that the substitution of metal cations to the chemical shift of hydrogen and carbon atoms in glycine; in order of lithium glycinate, sodium glycinate and potassium glycinate depending on the electro negativity. Meanwhile, the CO2 absorption at room temperature was the highest in primary amine solution, but at the increasing temperature sodium glycinate could capture more CO2 than that of the pure amine solution.