http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
SIEM 기반 사이버 침해사고 대응을 위한 데이터 보완 메커니즘 비교 분석
이형우,Lee, Hyung-Woo 한국사물인터넷학회 2022 한국사물인터넷학회 논문지 Vol.8 No.5
최근 IoT 및 휴대용 통신 단말에 각종 서비스가 연동되면서 해당 디바이스의 보안 취약점을 악용한 사이버 공격이 급증하고 있다. 특히 지능형 지속위협(APT) 공격을 통해 대단위 네트워크 환경에서 이기종 형태의 디바이스를 대상으로 한 사이버 공격이 급증하고 있다. 따라서 침해사고 발생시 대응 체계의 유효성을 향상시키기 위해서는 위협 분석 및 탐지 성능이 향상되도록 수집된 아티팩트 데이터에 대한 데이터 보완(Data Enrichment) 메커니즘을 적용할 필요가 있다. 이에 본 연구에서는 침해사고 분석을 위해 수집된 아티팩트를 대상으로 기존의 사고관리 프레임워크에서 수행하는 데이터 보완 공통 요소를 분석하여 실제 시스템에 적용 가능한 특징 요소를 도출하고, 이를 토대로 개선된 사고분석 프레임워크 프로토타입 구조를 제시하였으며 도출된 데이터 보완 확장 요소의 적합도를 검증하였다. 이를 통해 이기종 디바이스로부터 수집된 아티팩트를 대상으로 사이버 침해사고 분석 시 탐지 성능을 향상시킬 수 있을 것으로 기대된다.
다중 직교 특성을 갖는 FH-MFSK 방식의 수중음향통신
이형우,김기만,손윤준,김우식,천승용,이상국,Lee, Hyeung-Woo,Kim, Ki-Man,Son, Yun-Joon,Kim, Woo-Sik,Chun, Seung-Yong,Lee, Sang-Kook 한국음향학회 2014 韓國音響學會誌 Vol.33 No.6
In this paper, we propose an underwater acoustic communication of FH-MFSK(Frequency-Hopped Multiple Frequency Shift Keying) system with multiple orthogonal property. Generally, the processing of FSK(Frequency Shift Keying) method is simple, but it is vulnerable to ISI (Inter-Symbol Interference) caused by multipath transmission. In this paper, the orthogonal codes are generated with the same number of transmitting symbols, and these codes are corresponding to multiple frequencies. We used m-sequence to generate multiple orthogonal codes. We compared the performance of proposed method with conventional MFSK method via the experiment. As a result, we confirmed that the proposed method shows 6~10 % lower error rate at 100 bps than conventional method. 본 논문에서는 다중 직교 특성을 갖는 FH-MFSK(Frequency-Hopped Multiple Frequency Shift Keying) 방식의 수중음향통신을 제안한다. 일반적으로 FSK(Frequency Shift Keying) 방식은 처리 과정이 단순하지만 다중 경로 전달로 인해 발생하는 인접 심볼간 간섭에 취약하다. 본 논문에서는 전송하고자 하는 심볼 수와 동일한 서로 직교 성질을 갖는 코드들을 생성한다. 이 코드 값들은 각각 다수의 주파수들에 대응된다. 이러한 다중 직교 코드를 생성하기 위해 m-sequence를 이용하였다. 실험을 통해 제안된 방법의 성능을 기존의 MFSK 방식과 비교하였다. 100 bps 전송율에서 제안한 방법은 기존의 방법보다 오차율이 6 ~ 10 % 낮게 나타났다.
급속건조법(急速乾燥法)에 의한 은수원사시재(材)의 인공건조(人工乾燥)스케쥴 개발(開發)
이형우,Lee, Hyoung-Woo 한국목재공학회 1987 목재공학 Vol.15 No.2
A study was conducted to determine the kiln drying schedule for hydrid aspen, This kiln drying schedule was found by oven drying method and developed by pilot testing of 2.0cm, 2.5cm, 3.0cm-thick green lumber. The results of this study were as follows: 1. Kiln drying schedule developed by oven-drying method was $T_{12}-E_5$ for 2.5cm-thick green lumber. 2. Drying times for 2.0cm-thick green lumber(127.0 percent moisture content) to 7.3 percent moisture content, for 2.5cm-thick green lumber(95.0 percent moisture content) to 9.7 percent moisture content, and for 3.0cm-thick green lumber(118.5 percent moisture content) to 10.0 percent moisture content were 45 hours, 45 hours, and 54 hours, respectively. 3. Drying rate from 90 to 10 percent moisture content of 2.5cm-thick lumber was about 0.7 times faster than that of 2.0cm-thick lumber and about 1.1 times faster than that of 3.0em-thick lumber. 4. End checks for 2.0cm-, 2.5cm-, and 3.0cm-thick green lumber occurred 95, 74 and 100 percent moisture content, respectively and reached maximum amount in 53, 41, and 60 percent moisture content, respectively. 5. No surface check and no honeycomb occurred. 6. Cupping and collapse slightly occurred and the quality of dry lumber was first.