http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이우상,허광희,박기태,전준용 한국구조물진단유지관리공학회 2008 한국구조물진단유지관리공학회 논문집 Vol.12 No.4
본 논문에서는 구조물의 응답 신호만을 스마트 센서 시스템으로 획득하여 모달 인자들을 추출하는 연구를 수행하였다. 본 연구의 목적은 최근에 차세대 계측시스템으로 활발히 연구 되고 있는 스마트 센서 시스템의 성능과 현장 적용 가능성을 검증하는데 있다. 본 연구에 사용된 스마트 센서 시스템은 MEMS형 가속도 센서와 8bit CPU, 무선모뎀을 이용하여 실시간 동적계측이 가능하도록 개발되었다. 모달 인자 추출 실험은 모형 캔틸레버 보에 임의 가진을 가한 후, 구조물의 응답을 스마트 센서와 범용계측장비로 각각 획득하였다. 데이터 분석은 NExT & ERA 알고리즘을 이용하여 모달 인자를 추출하였다. 또한, 양질의 데이터를 획득하기 위하여 EOT알고리즘으로 최적의 계측위치를 선정하였다. 실험 결과, 스마트 센서의 현장 적용 가능성을 확인할 수 있었다. In this study, the research was carried out on how to identify the modal parameter by acquiring the output response of the structure only through the smart sensor system. The objective of this research is to verify the performance and the on-site adaptability of the smart sensor system that have been actively researched as the advanced measuring system so far. Smart Sensor System was developed so that the real-time dynamic measurement can be performed by means of MEMS-type accelerated sensor, 8 bit CPU, wireless MODEM. In the modal parameter identification test, random excitation was added to the cantilever beam, and then the response of the structure was obtained using the smart sensor system and the wire measurement system respectively. In analyzing the data, modal parameter was identified using NExT & ERA algorithm. Furthermore, the optimal measurement location was selected through EOT algorithm in order to obtain the qualified output response. Result of the test, it was possible to verify the on-site applicability of the smart sensor.
Spill-over 억제를 위한 X-band 카세그레인 안테나 설계 연구
이우상,장원,이병무,양기주,이상흔,윤영중,Lee Woo-Sang,Jang Won,Lee Byoung-Moo,Yang Gi-Joo,Lee Sang-Heun,Yoon Young-Joong 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.9
본 논문에서는 초고출력용 X-band 카세그레인 반사판 안테나 시스템에서 반사판의 표면 형상을 변형시켜 spill-over가 효과적으로 감소하는 현상에 대하여 이론적인 고찰을 수행하였다. 이러한 구조는 이중의 쌍곡면 부 반사판을 적용함으로써 주 반사판의 크기를 확장하지 않고 급전 혼 안테나에서 방사된 전파 패턴의 확장각을 증가시켜 spill-over특성이 감소되도록 설계하였다. 결과적으로 본 논문에서 제안된 카세그레인 반사판 안테나가 기존의 설계 방법에 의한 반사판 안테나에 비해 약 9 %의 효율 향상과 10 dB의 부엽 레벨 감소가 구현됨을 이론적으로 확인하였다. In this paper, new structure of the Cassegrain reflector antenna whose spill-over is efficiently reduced by modified reflectors is proposed for high power. It can be achieved by designing the geometry of subreflector in Cassegrain system using two hyperbolic curves in order to be suitable a lager beamwidth of feeding pattern without broadening main reflector. Finally, radiation efficiency and side lobe level of the proposed Cassegrain reflector antenna can be improved respectively 9 %, 10 dB than conventional one.
유동법에 의한 용융 ZnCl<sub>2</sub> 및 FeCl<sub>2</sub>의 증기압 측정
이우상,김원용,정우광,Lee, Woo-Sang,Kim, Won-Yong,Jung, Woo-Gwang 한국재료학회 2010 한국재료학회지 Vol.20 No.3
Chloride-based fluxes such as NaCl-KCl are used in the refining of Al melt. The vapor pressure of the chloride is one of the fundamental pieces of information required for such processes, and is generally high at elevated temperatures. In order to measure the vapor pressure for chlorides, the apparatus for the transpiration method was assembled in the present study. The vapor pressure of $ZnCl_2$ and $FeCl_2$, which is related with the process of aluminum refining and the recovery of useful elements from iron and steel industry by-products, was also measured. In the measurement of vapor pressure by the transpiration method, the powder of $ZnCl_2$ or $FeCl_2$ in a alumina boat was loaded in the uniform zone of the furnace with a stream of Ar. The weight loss of $ZnCl_2$ and $FeCl_2$ after holding was measured by changing the flow rate of Ar gas (10 sccm -230 sccm), and the partial pressures of $ZnCl_2$ and $FeCl_2$ were calculated. The partial pressures within a certain range were found to be independent of the flow rate of Ar at different temperatures. The vapor pressures were measured in the temperature range of 758-901K for $ZnCl_2$ and 963-983K for $FeCl_2$. The measured results agreed well with those in the literature.