LCC분석에 의한 슬러지수집기 선정 모델

이승훈,우유미,이성락,구교진,현창택,홍태훈,Lee, Seung-Hoon,Woo, Yu-Mi,Lee, Sung-Rak,Koo, Kyo-Jin,Hyun, Chang-Taek,Hong, Tae-Hoon 한국건설관리학회 2006 건설관리 : 한국건설관리학회 학회지 Vol.7 No.6

사회기반시설의 노후화에 따라 시설물 유지관리에 관한 관심이 증대되고 있으며, 이에 따라 다양한 사회기반시설에 대한 LCC분석 연구가 수행되고 있다. 특히 기계설비가 다수 포함된 기반시설에서는 시설물의 건설비와 더불어 보수/교체비, 에너지비 등 유지관리비용이 높은 비중을 차지하고 있다. 이에 본 연구에서는 하수처리장의 슬러지 수집기 선정에 있어 정량적 요소와 정성적 요소를 모두 고려하는 LCC 분석 모델을 개발하고, 사례적용을 통하여 최적대안을 선정하고자 한다. 문헌고찰과 분석대상 하수처리장의 슬러지 수집기에 대한 공사비와 유지관리 및 보수/교체 이력자료를 바탕으로 비용항목을 도출한다. LCC분석을 위한 가정사항 설정 후, 각 항목별 실적자료와 장비납품업체의 정보를 활용하여 경제성 평가결과를 도출하고, 할인율과 초기투자비 및 유지관리비의 비용변동범위에 따른 민감도분석을 실시한다. 설계자, 자재공급업체 및 시공전문가의 면담을 통하여 유지관리 편의성, 조달 용이성, 슬러지 수집 성능, 침전물제거 효율도, 환경친화성 등 슬러지 수집기 선정을 위한 기술적 사회적 영향인자를 파악한다. 분석된 기술적 사회적 요인과 LCC 분석결과인 경제성에 대하여 각 항목별 쌍별비교를 통하여 항목별 가중치를 설정하고 전문가 평가를 통하여 종합적인 최적안을 선정한다. This study focused on developing Life Cycle Cost(LCC) analysis model for selecting sludge collectors in wastewater treatment system and applying the model to a case study. Cost items are examined through literature review and historical data of a facility. Analysis period, discount rate, energy cost escalation ratio are assumed to reasonable level. Monetary evaluation is performed using historical data and estimations from vendors. Sensitive analysis is executed using Monte Carlo Simulation for assumed factors. Interviews with operators, vendors, constructors, managers are conducted to define factors which indicates ease of maintenance, ease of delivery, technical performance, efficiency, environmental friendship. Factors are representing technical and social factors. Results from LCC analysis and qualitative analysis are evaluate together with Weighted Matrix Evaluation Methods for optimum alternative of sludge collectors.

CMOS 이미지 센서용 NMOS-Diode eFuse OTP 설계

이승훈,하판봉,김영희,Lee, Seung-Hoon,Ha, Pan-Bong,Kim, Young-Hee 한국정보통신학회 2016 한국정보통신학회논문지 Vol.20 No.2

본 논문에서는 프로그램 선택 소자는 채널 폭이 큰 NMOS (N-channel MOSFET) 트랜지스터 대신 DNW (Deep N-Well) 안에 형성된 채널 폭이 작은 isolated NMOS 트랜지스터의 body인 PW (P-Well)과 source 노드인 n+ diffusion 영역 사이에 형성된 기생하는 접합 다이오드를 사용하는 NMOS-Diode eFuse OTP (One-Time Programmable) 셀을 제안하였다. 제안된 eFuse OTP 셀은 프로그램 모드에서 NMOS 트랜지스터에 형성되는 기생하는 접합 다이오드를 이용하여 eFuse를 blowing 시킨다. 그리고 읽기 모드에서는 접합 다이오드를 이용하는 것이 아니고 NMOS 트랜지스터를 이용하기 때문에 다이오드의 contact voltage 강하를 제거할 수 있으므로 '0' 데이터에 대한 센싱불량을 제거할 수 있다. 또한 읽기 모드에서 채널 폭이 작은 NMOS 트랜지스터를 이용하여 BL에 전압을 전달하므로 OTP 셀의 blowing되지 않은 eFuse를, 통해 흐르는 읽기 전류를 $100{\mu}A$ 이내로 억제하여 blowing되지 않은 eFuse가 blowing되는 문제를 해결할 수 있다. In this paper, an NMOS-diode eFuse OTP (One-Time Programmable) memory cell is proposed using a parasitic junction diode formed between a PW (P-Well), a body of an isolated NMOS (N-channel MOSFET) transistor with the small channel width, and an n+ diffusion, a source node, in a DNW (Deep N-Well) instead of an NMOS transistor with the big channel width as a program select device. Blowing of the proposed cell is done through the parasitic junction formed in the NMOS transistor in the program mode. Sensing failures of '0' data are removed because of removed contact voltage drop of a diode since a NMOS transistor is used instead of the junction diode in the read mode. In addition, a problem of being blown for a non-blown eFuse from a read current through the corresponding eFuse OTP cell is solved by limiting the read current to less than $100{\mu}A$ since a voltage is transferred to BL by using an NMOS transistor with the small channel width in the read mode.

공동주택 마감공사 공사주체별 작업지연 요인 분석

이승훈,김용만,김주형,김재준,Lee, Seung-Hoon,Kim, Yong-Man,Kim, Ju-Hyung,Kim, Jae-Junn 한국건축시공학회 2011 한국건축시공학회지 Vol.11 No.1

건설 공사의 궁극적인 목표는 주어진 공사를 요구된 공사기간내에 설계도서에 명시된 품질 기준을 만족시키면서 가장 경제적이고 안전하게 완성하는데 있다. 마감공사는 공종이 세분화되어 매우 다양하고 복잡한 구조를 가지고 있으며 적정 투입 시점에 대한 세부 공종별 기준이 없고, 선후행 작업간의 우선 순위의 정립의 필요성이 약한 것이 특징이다. 본 연구는 마감공사 작업지연을 최소화하기 위하여 마감공사 세부 공종별 작업지연 우선 순위를 선정하여 소요 공기에 맞추어 프로젝트를 완료할 수 있는 정보를 제공하는 것이 목적이다. 본 연구에서 마감공사를 습식공사와 기타 마감공사로 나누어 각 공종별 내역을 기반으로 중요도를 분류하고, 설문을 통해 설계자, 시공자, 협력업체의 작업지연 요인을 분석하여 최종 작업지연 우선 순위를 선정하여 계획 공사기간 내에 공동주택 프로젝트를 완료할 수 있는 정보를 제공하는데 목적이 있다. The ultimate goal of construction is to complete the given work in the most economical and safest way within the required construction period while meeting the quality standards specified in the design drawing. There are a few characteristics of finish work. First, executed in subdivided processes, finish work involves a very diverse and complex structure. Second, there are no criteria for each segmented process with regard to the appropriate time of input. Third, it is not very necessary to set priorities for lead and lag works. This study intends to provide information on the completion of a project in accordance with the required duration by setting priorities in the delay of each detailed process of finish work to minimize delay in finish work. In this study, finish work is divided into wet work and other types of finish work, and the importance of each process is classified based on the given details of each process. In addition, the study employs a survey to analyze delay factors of a designer, a constructor, and a supplier. Using the survey results, the study sets priorities in delay of final work to provide information on the completion of an apartment project within the planned construction period.

주요우울장애의 치료로서 경두개 직류자극술(Transcranial Direct Current Stimulation)의 현재

이승훈,김용구,Lee, Seung-Hoon,Kim, Yong-Ku 대한생물정신의학회 2018 생물정신의학 Vol.25 No.4

Transcranial direct current stimulation (tDCS) is a non-invasive brain stimulation method that delivers 1-2 mA of current to the scalp. Several clinical studies have been conducted to confirm the therapeutic effect of major depressive disorder (MDD) patients with tDCS. Some studies have shown tDCS's antidepressant effect, while the others showed conflicting results in antidepressant effects. Our aim of this review is to understand the biological bases of tDCS's antidepressant effect and review the results of studies on tDCS's antidepressant effect. For the review and search process of MDD treatment using tDCS, the US National Library of Medicine search engine PubMed was used. In this review, we discuss the biological mechanism of tDCS's antidepressant effect and the existing published literature including meta-analysis, systematic review, control trial, open studies, and case reports of antidepressant effects and cognitive function improvement in patients with MDD are reviewed. We also discuss the appropriate tDCS protocol for MDD patients, factors predictive of response to tDCS treatment, the disadvantages of tDCS in MDD treatment, and side effects.

플라즈마 처리에 의한 폴리비닐리덴플로라이드 나노섬유의 젖음성

이승훈,장선호,소윤미,이헌수,양철민,윤중현,김찬,Lee, Seung-Hoon,Jang, Seon-Ho,So, Yun-Mi,Lee, Hun-Su,Yang, Cheol-Min,Yun, Jung-hyun,Kim, Chan 한국섬유공학회 2018 한국섬유공학회지 Vol.55 No.1

Poly(vinylidene fluoride) (PVDF) is a critical polymeric material used in the mass production and application of electrospun nanofibers, and is popular due to its excellent properties. However, electrospun PVDF nanofibers are very hydrophobic and possess low surface energies, limiting their broad application. In this work, we investigated practical methods for the hydrophobic surface modification of PVDF nanofibers using four techniques: radio-frequency (RF) and PIN-type atmospheric plasmas, planar inductively coupled plasma (ICP), and planar capacitively coupled plasma (CCP). The use of RF atmospheric plasma was ineffective under the experimental conditions used, while the PIN-type atmospheric plasma efficiently modified PVDF nanofiber surfaces locally. The application of planar CCP to PVDF nanofibers was more effective than planar ICP for the same experimental conditions. In particular, the water contact angles of samples treated with planar CCP for 600 s and 900 s were $25^{\circ}$ and $10^{\circ}$ respectively, and wettability improved. Analysis with FT-IR, XPS, and FE-SEM showed that the surface CF and CH hydrophobic groups were destroyed without damaging the PVDF nanofibers, and hydrophilic species such as C=O, OH, and COOH were formed. As a consequence, quantitative analysis of nanofiber chemical composition is necessary when treated by plasmas, providing insight into the correlation of specific property changes with processing conditions, and indicating precise research results and application examples.

인간 교세포주에서 CoCl₂에 의한 phospholipase D의 조절기전

이승훈,민계식,민도식,Lee, Seung-Hoon,Min, Gye-Sik,Min, Do-Sik 한국생명과학회 2006 생명과학회지 Vol.16 No.4

본 연구에서 최근 세포내 신호전달을 매개하는 중요한 효소로써 PLD 동위효소에 대하여, $CoCl_2$가 PLD 동위효소의 활성을 증가시킨다는 사실을 밝혔으며, 중간에 매개되는 단백질로써, PLD1은 p38 MAP kinase, PKA와 $PKC-{\delta}$의 조절을 받고 PLD2는 p38 MAP kinase와 PLC의 조절을 받으므로 그 활성 기전이 각각 다르다는 사실을 확인하였다. 그리고 $CoCl_2$에 의해 생성되는 활성산소 종에 의한 염증상태가 유도될 것이라고 예상하였고 $CoCl_2$가 PLD 동위효소를 매개로 하여 염증상태에서만 특이적으로 발현되고 염증반응을 매개하는 COX-2 단백질에 어떠한 영향을 미칠 것인가를 조사하였다. 결과적으로 $CoCl_2$에 의해 PLD 효소 활성이 증가됨으로써 COX-2의 발현이 증가한다는 것을 발견하였을 뿐만 아니라 COX-2의 발현에 대하여 COX-2 promoter의 활성도 증가한다는 사실을 확인함으로써 전사수준에서의 결과도 이를 뒷받침 해 주고 있었다. Phospholipase D (PLD) is known to play an important role in a variety of cells. However, little is known about $CoCl_2-mediated$ PLD signaling. In this study we demonstrated for the first time that $CoCl_2$ stimulates PLD activity and increases expression of cyclooxygenase-2 (COX-2), which is known to mediate inflammatory reaction. $CoCl_2-induced$ PLD activity was assessed by measuring the formation of $[^3H]$ phosphatidylbutanol (PtdBut), the product of PLD-mediated transphosphatidylation, in the presence of 1-butanol. To study mechanism of PLD signaling induced by $CoCl_2$, U87 human glioblastoma cells were stimulated by $CoCl_2$ and regulators of PLD activity induced by $CoCl_2$ were investigated using several inhibitors of signaling proteins. Moreover, PLD activation by $CoCl_2$ increased not only expression of COX-2 protein but also COX-2 promoter activity. In summary, these results suggest that $CoCl_2$ increases expression of COX-2 protein via PLD in human U87 glioblastoma cells.

Denitrification Potential and Denitrifier Abundance in Downstream of Dams in Temperate Streams

이승훈,정석희,강호정,Vo, Nguyen Xuan Que,Lee, Seung-Hoon,Doan, Tuan Van,Jung, Sokhee P.,Kang, Hojeong 한국미생물학회 2014 미생물학회지 Vol.50 No.2

댐의 존재가 하천 생태계에 미치는 영향을 연구하기 위해 다양한 연구가 지금까지 수행되어 왔지만, 댐이 하류의 탈질화에 미치는 영향은 잘 알려져 있지 않다. 대한민국 낙동강의 댐 원류에서 탈질화 효소 활성도(잠재 탈질율)와 탈질균 분포(nirS, nirK, nosZ 유전자를 표지유전자로 사용)를 조사하였다. 자갈 혹은 모래로 채워진 하천의, 갈대가 우거진 하변지역과 강바닥의 침전물을 채취하여 조사하였다. 이 실험의 가설은 다음과 같다. (i) 하천 침전물의 N과 C의 사용유효량이 높을수록 대조군에 비해 미생물 군집의 탈질화 작용이 더욱 증진한다, (ii) 하천생태계마다 상이하게 나타나는 잠재 탈질율 간의 차이는 탈질 미생물의 양에 비례한다. 30여 년간 댐에 의해 수문학적으로 큰 차이가 있었고 또한 댐 하류의 저서에 무기질소와 용존유기탄소 농도가 대조군에 비해 매우 높았음에도 불구하고, 탈질균 군집의 양과 잠재 탈질율은 하천 간에 큰 차이가 없었다. 하지만 nirS 유전자와 nosZ 유전자의 양과 잠재 탈질율은 댐 하류에 존재하는 자갈이 많은 하변과 모래가 많은 하천 바닥에서 홍수빈도와 계절별 온도변동에 관련하여 크게 증가함을 알 수 있었다. nirK 유전자는 모든 시료에서 발견되지 않았다. Canonical correspondence analysis (CCA) 분석결과는 탈질균 군집 양과 영양염류 가용도와 잠재 탈질율 사이에는 약한 상관관계가 있음을 보여주었다. Various studies have been conducted to investigate effects of dams on river ecosystems, but less information is available regarding damming impacts on downstream denitrification. We measured denitrification enzyme activity (potential denitrification rate) and denitrifier abundances (using nirS, nirK, and nosZ as markers) in dammed headstreams of the Nakdong River in South Korea. Sediments in Phragmites-dominated riparian areas and in-stream areas across streams (dammed vs. reference) with different streambed materials (gravel and sand) were sampled occasionally. We hypothesized that (i) the higher available N and C contents in sediments downstream of dams foster larger denitrifier communities than in the reference system and (ii) differences in potential denitrification rates across the systems correspond with denitrifier abundances. Despite 30 years of different hydrological management with dams and greater inorganic N and DOC contents in sediments downstream of dams, compared to the references, abundances of denitrifier communities and potential denitrification rates within the whole sediment were not significantly different across the systems. However, nirS and nosZ denitrifier abundances and potential denitrification rates were considerably increased in specific sediments downstream of dams (gravelly riparian and sandy in-stream) with regard to flooding events and seasonal temperature variation. nirK was not amplified in all sediments. Canonical correspondence analyses (CCA) revealed that the relationship between abundances of denitrifier communities and nutrient availabilities and potential denitrification rates was a weak one.

TadGAN 기반 시계열 이상 탐지를 활용한 전처리 프로세스 연구

이승훈,김용수,Lee, Seung Hoon,Kim, Yong Soo 한국품질경영학회 2022 품질경영학회지 Vol.50 No.3

Purpose: The purpose of this study was to increase prediction accuracy for an anomaly interval identified using an artificial intelligence-based time series anomaly detection technique by establishing a pre-processing process. Methods: Significant variables were extracted by applying feature selection techniques, and anomalies were derived using the TadGAN time series anomaly detection algorithm. After applying machine learning and deep learning methodologies using normal section data (excluding anomaly sections), the explanatory power of the anomaly sections was demonstrated through performance comparison. Results: The results of the machine learning methodology, the performance was the best when SHAP and TadGAN were applied, and the results in the deep learning, the performance was excellent when Chi-square Test and TadGAN were applied. Comparing each performance with the papers applied with a Conventional methodology using the same data, it can be seen that the performance of the MLR was significantly improved to 15%, Random Forest to 24%, XGBoost to 30%, Lasso Regression to 73%, LSTM to 17% and GRU to 19%. Conclusion: Based on the proposed process, when detecting unsupervised learning anomalies of data that are not actually labeled in various fields such as cyber security, financial sector, behavior pattern field, SNS. It is expected to prove the accuracy and explanation of the anomaly detection section and improve the performance of the model.

가소제 함유 PVDF 나노섬유의 상용화 가능성에 관한 연구

이승훈,소윤미,장선호,심현주,김찬,Lee, Seung-Hoon,So, Yun-Mi,Jang, Seon-Ho,Shim, Hyun-Joo,Kim, Chan 한국섬유공학회 2017 한국섬유공학회지 Vol.54 No.4

The mechanical properties and softness of electrospun polyvinylidene fluoride (PVDF) nanofibers was improved by the addition of a small amount of tributyl citrate (TBC) plasticizer to PVDF spinning solutions. The PVDF nanofibers containing TBC were prepared by electrospinning and subsequent calendering. The morphology, mechanical properties, and thermal properties of the electrospun PVDF nanofibers were investigated using Field Emission Scanning Electron Microscopy (FE-SEM), tensile test and DSC analysis. The results of the tensile experiment indicate that the PVDF nanofibers containing 5 wt% of TBC have three times better strength and six times higher elongation in the mechanical direction (MD) compared to those of pure PVDF nanofibers. Thus, the results indicate that PVDF nanofibers containing TBC have potential applications not only in the textile industry but also in the electrical and biomedical fields. Further, the excellent mechanical properties and softness of the eco-friendly nanofibers containing TBC plasticizer is useful for its commercialization.

건설사업 설계초기단계 VE 적용방안

이승훈,구교진,현창택,Lee Seung-Hoon,Koo Kyo-Jin,Hyun Chang-Taek 한국건설관리학회 2005 건설관리 : 한국건설관리학회 학회지 Vol.6 No.3

본 연구는 설계초기단계에 적합한 VE 적용방안을 제안하고자 하였다. VE방법론은 설계단계 초기에 적용할 경우 더욱 효과적이므로 본 연구는 설계 프로세스 초기단계의 설계YE에 초점을 맞추고 있다. 관련 연구문헌의 고찰과 실무경험을 바탕으로 국내 건설산업에서 설계VE의 문제점을 도출하였다. 이러한 문제점을 해결하기 위하여 본 연구는 (1)설계단계별 VE실시시기를 구분하고, (2)건설산업에 적합한 VE대상선정 방법을 제안하며, (3)기능분석 프로세스를 보다 합리적이고 실용적으로 개선함으로써 (4)전체 설계VE 수행절차를 효율적으로 개선하고자 하였다. The purpose of this study is to present proper VE application methods to euly design phases. Since VE methodology is more effective on early stage of design phase, the study focused on application of VE methodology in early stage of design process. With the examination of past studies, obstacles of VE application in domestic construction industry are defined. To solve these problems, this paper presents (1) subdivision of VE execution time, (2) an appropriate VE targeting method for construction industry, (3) a resonable and practical function analysis process, and (4) modified design-VE job plan.