http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PARCOR 분석방법에 의한 R 2 MF 수신기 구현에 관한 연구
하판봉,안수길 한국음향학회 1986 韓國音響學會誌 Vol.5 No.4
The following methods have been proposed for implementing R2 multi-frequency receiver digitally: using digital filters, period-counting algorithm, discrete Fourier transform or Goertzel algorithm, and fast Fourier transform.
가입자 선로 SIMULATION을 위한 TONE 검출기
하판봉 國立 昌原大學校 産業技術硏究所 1988 産技硏論文集 Vol.2 No.-
In this paper we have implemented tone detector for subscriber line simulation. Since tone detector requires real-time operation, it is designed and implemented using a high speed digital signal processor, TMS32010 family. IIR digital filter bank was chosen for a real-time operation. The algorithm developed in this paper was tasted using TMS32010 simulater and tested in real-time operation using a hardware emulator of XDS/32010 emulator. The detection rate is about 99% and it is a excellent result.
DSP LSI을 이용한 DTMF 수신기의 구현에 관한 연구
하판봉,안수길 한국음향학회 1986 韓國音響學會誌 Vol.5 No.2
DSP LSE을 이용하여 디지털 DTMF 수신기를 구현하는 방법으로는 IIR 디지털 필터, Counter 방법, DFT 방법, FFT 방법 및 PARCOR 방법등이 제안되어 왔다. 그 중에서도 IIR 디지털 필터를 이용 한 방법은 기존의 아나로그 DTME 수신기를 그대로 디지털화 한 것이기 때문에 성능이 제일 우수한 것 으로 알려져 있다. 그러나 IIR 디지털 필터를 이용하여 그것을 구현할 때 필터의 계수, roundoff 잡음, overflow 등 고려해야 할 사항이 많다. 본 논문에서는 이러한 문제점들을 해결하면서 CCITT 사양들을 만족하는 디지털 DTMF 수신기 구현에 관한 연구결과를 제시하였다. DSP LSI을 이용해서 수신기를 hardware 제작할 때 이 결과들을 수정없이 이용할 수 있다고 기대된다.
한국어 연속음인식에 관한 연구(유성음 분류 및 단모음 인식 )
하판봉,이철희,방승찬,안수길 한국음향학회 1986 韓國音響學會誌 Vol.5 No.3
우리나라 음성의 유성음을 모음, 비음 및 유성화 자음으로 분류하는 알고리즘을 기술하였다. 먼 저 기존의 PITCH 검출 알고리즘에 의하여 음성을 유성음과 무성음으로 나눈 뒤, 단지 정규화된 1차 상 관계수, 영교차율, LOG 에너지 및 LPG 에너지의 골짜기 검출만을 이용하여, 유성음은 모음, 비음 및 유 성화자음으로 분류하고 무성음은 실제의 무성음과 묵음으로 분류하였다. 그리고 이렇게 분류된 모음에 대하여 단모음 인식을 행하였다. 단지 한 FRAME으로 모음을 대표하였기 때문에 메모리 크기와 인식 시간을 줄였다. 여기서 UP & DOWN 및 수정된 영교차율을 새로이 정의하여 적용한 결과 만족한 결과 를 얻을 수 있었다. LPC 매개변수 및 전력 스펙트럼도 단모음 인식의 FEATURE로 사용하였다. 그리고 각 FEATURE 의 성능을 비교하였다. 이들 FEATURE을 잘 조합하여 2단계 인식을 행한 결과 92%의 높은 인식율을 얻을 수 있었다.
Robust Thresholding을 이용한 Wavelet 기반의 영상잡음 제거연구
하판봉 國立 昌原大學校 産業技術硏究所 2002 産技硏論文集 Vol.16 No.-
Approaches to wavelet-based denoising (or signal enhancement) have so far relied on the assumption of normally distributed perturbations. To relax this assumption, which is often violated in practice, we derive a robust wavelet thresholding technique based on the minimax description length principle. We first determine the least favorable distribution in the ε-cintaminated normal family as the member that maximizes the entropy. We show that this distribution and the best estimate, constitute a saddle point. This results in a threshold that is more resistant to heavy-tailed noise, but for which the estimation error is still potentially unbounded. We address the practical case where the underlying signal is known to be bounded, and derive a two-sided thresholding technique that is resistant to outliers and has bounded errors. We provide illustrative examples.
실시간 Multi-Tasking Processor Scheduler에 관한 연구
하판봉 國立 昌原大學校 産業技術硏究所 1990 産技硏論文集 Vol.4 No.-
Real-time multi-tasking processor scheduler(PRCSCH)consists of four function blocks : task dispatcher (XSCAN), high-priority queue handler(XSETHI), and d-bus input queue handler(XBIQ). The last function will be supplied by inter-processor communication module and will not be described here. XSCAN schedules bus input tasks, high-priority tasks, timeout tasks, timeout tasks, normal tasks, and free-time tasks according to their status bytes. Tasks are run in the following way, XSCAN takes out top message in the d-bus input queue, translates the communication type byte(comty) contained in the message to its corresponding task index value, and runs the task when its ready bit is set. If its ready bit is reset or no message is waiting in the d-us input queue, XSCAN checks the high-priority queue. If any task is waiting in it, the task is run before any normal tasks. After bus input tasks and high-priority tasks are run. XSCAN runs normal tasks sequentially according to their status bytes. At extreme case that there are no normal tasks to be run, XSCAN runs free-time tasks(for example memory test, interface test, etc) of which free bit is set. XSETHI allows each task to upgrade the priority of the ask to high priority, thus permitting it to be run before any normal task. Multiple high-priority requests can be queued. And XTIME supplies to each task a timer that can be used to suspend its execution for a specified duration of time. These are useful for i/o timeout. If XTIME receives timeout request from a task with tick count(multiples of real-time clock period), the task will be run by XSCAN when timeout expires.